3532-b released

**Eugene Gavrilov** · Apr 21, 2003, 12:54 AM

hi there

3532-b internal development built released

the changelog:
Pseudo Mic-in slider for Windows Mixer added (for compatibility only) 
Fixed bug with Windows Mixer - kX Mixer notifications (redraw) 
Fixed bug with 'Reset global settings' 
SPDIF-In AC-3 decoding implemented for 10k2-based boards (alpha: high latency...) 
New CLEAX3Reverb effect added ('Concert hall' preset) 
New Stereo Mix + Gain effect added 
Improved SoundFont formulas 
Fixed bug with clicks when using Vienna 

also improved multicard support

full list of the changes since 3531 is available here: http://www.hardwareheaven.com/showthre...threadid=14197

URL: http://kx.maincore.nl/kxdrv3532b-update.exe

please report any bugs concerning the new features and/or fixes.
note that in general if anything is NOT mentioned in the changelog, it is NOT implemented.
that is, there are no changes related to GSIF, kxmixer delays, kx remote and so on

/Eugene

Robert McClelland · Apr 21, 2003, 04:45 AM

Hey Eugene I redid installed your drivers I forget turn on router hehe Um there still bugs with your new set. I can't change the 44,000 48,000 or 96,000 it's always suck on 48,000 on the SPDIF mode.

bugbug · Apr 21, 2003, 06:12 AM

Hi

The line-in slider and the ac97 slider( in the recording panel) do nothing when you move them in v3532a and 3532b. Moving those sliders do nothing to the actual levels. So for example I cant lower the level of "what you hear"

bug

----Hardware / Software configuration---------------
Driver Name:kX Audio Driver (Debug)
Driver Date: Apr 20 2003 08:05:13
Driver Version: 5.10.00.3532 - debug
DB Name:none
CT4670 10k1 [d000]
PCI Information:
Device: 21102 Subsys: 201102 ChipRev: 5
Card has MPU device
Card HAS AC97 codec
Codec name: TriTech TR A5/CT1297 TAT
3D Extension: No 3D Stereo Enhancement
Codec is 1.0 compliant
Capabilities[0] :
DAC resolutions : -16-bit-
ADC resolutions : -16-bit-
Ext Capabilities [0]:
Port: d000 Irq: 6
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148]
----------------------------------------------------

Max M. · Apr 21, 2003, 02:24 PM

>Moving those sliders do nothing to the actual levels. - Reread the "changelog" once more, please!!!!

gooday · Apr 21, 2003, 05:14 PM

well, when I turn back to 3531 from 3532b, it caused BSOD when I use my recording software.

bugbug · Apr 21, 2003, 07:35 PM

Quote:

Originally posted by Max M.
>Moving those sliders do nothing to the actual levels. - Reread the "changelog" once more, please!!!!

I did...I dont see anything pertaining to problem I mentioned. The line-in slider does nothing. Worked fine in previous versions.

**Eugene Gavrilov** · Apr 21, 2003, 09:00 PM

>> The line-in slider and the ac97 slider( in the recording panel) do nothing when you move them in v3532a and 3532b

there's no 'line-in' slider on the 'recording' page

btw are you sure you have unmuted the source?

could you pls give a more detailed report? (in a different thread)

[note that standard windows slider 'line-in' corresponds to 'ac97 in', however, 'alternate microphone' isn't a 'real' slider and doesn't do anything]

/Eugene

bugbug · Apr 21, 2003, 10:11 PM

I uploaded screen captures

http://www.dietcocaine.com/images/kx1.JPG
http://www.dietcocaine.com/images/kx2.JPG

I drew red boxes around the sliders in question. Its doesnt matter what I set these sliders to. They are 100% all the time. I dont know how to be more detailed than to say they dont work at all. It doesnt matter if the line-in slider is all the way down or all the way up. This makes it impossible to lower what I hear from the line in without lowering the recording level. This problem doesnt exist in 3531 and earlier.

Robert McClelland · Apr 22, 2003, 04:14 AM

Eugene did you ask my question I had np changing that only your new currect set that you have out in this thread

Daniel Drummond · Apr 22, 2003, 04:29 AM

Robert, "note that in general if anything is NOT mentioned in the changelog, it is NOT implemented."

Robert McClelland · Apr 22, 2003, 06:45 AM

ya ok just want make sure he fixes in next release of those drivers of his

eyagos · Apr 22, 2003, 10:48 AM

Little Bug with devices names:

My Audigy2 card (SB0240) is well identified in the mixer, and works correctly. But in the windows Device's Administator it appears as "Creative SB Audigy", and simply as "KX Wave" in the Sound Devices List.
I use Windows XP.

----Hardware / Software configuration---------------
Driver Name:kX Audio Driver (Debug)
Driver Date: Apr 18 2003 02:35:04
Driver Version: 5.10.00.3532 - debug
DB Name:none
SB0240 10k2 [c000]
PCI Information:
Device: 41102 Subsys: 10021102 ChipRev: 4
Card is '10k2'
Card has MPU device
Card model is '5.1'
Card is Audigy2-compatible
Card HAS AC97 codec
Codec name: SigmaTel STAC9721/23
3D Extension: SigmaTel 3D Enhancement
Codec is 2.0 compliant
Capabilities[6940] :
DAC resolutions : -16-bit- -18-bit-
ADC resolutions : -16-bit- -18-bit-
Ext Capabilities [200]: -slot/DAC mappings-
Port: c000 Irq: 14
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
----------------------------------------------------

**Eugene Gavrilov** · Apr 23, 2003, 12:32 AM

>> Driver Date: Apr 18 2003 02:35:04

you seem to be using 3532-a, not "-b"

>> I can't change the 44,000 48,000 or 96,000 it's always suck on 48,000 on the SPDIF mode.
>> Eugene did you ask my question I had np changing that only your new currect set that you have out
>>in this thread

so, what is the present state of 'spdif freq' issue?
is it solved? no? what version? was it functional before? when?

btw, pls run 'kxctrl -istat' for each 'spdif freq' status
and copy your 'about...->hardware/software configuration' here...

/Eugene

**Eugene Gavrilov** · Apr 23, 2003, 12:43 AM

>>I drew red boxes around the sliders in question. Its doesnt matter what I set these sliders to. They
>>are 100% all the time. I dont know how to be more detailed than to say they dont work at all. It
>>doesnt matter if the line-in slider is all the way down or all the way up. This makes it impossible to
>>lower what I hear from the line in without lowering the recording level. This problem doesnt exist in
>>3531 and earlier

the 'ac97 line in' slider is to be =muted= [on the 'ac97' page]
evey ac97 source is to be muted. you have 'line-in' already selected as ac97 source

try toggling 'ac97 in' mute on and off again [on the 'recording' page]

/Eugene

Robert McClelland · Apr 23, 2003, 01:58 AM

Um no Eugene I'm using B verison and still getting that error change mode.

eyagos · Apr 23, 2003, 04:18 PM

- Same problem as Robert: Can't change the spdif freq. But there is more, when I tried to change it, the sound has gone completely (in an Audigy2), and now there is an error mesage window each time I try to change the freq.

Wait a moment...: I have been playing with the reset setings options, and now I can change the frecuencym but there is no sound yet.

After restarting the sound comes back, but the problem is still there.

Another thing, I use two cards, an Audigy (wich works fine) and an Audigy2. But I'm not able to get the parameters of the second one with kxctr (I have tried 'kxctrl $ 2' but nothing)

- About the device names, after reinstaling drivers (updating to 3532-b), the names in the adio devices list are now correct, but I still I have the "Creative Audigy" name in the devices administrator list.

- And other thing, I have detected an error with the plugins. The problem is refered to the 'skip' instruction: Yesterday a plugin I wroted was not working, and I suspect the problem was with this instruction. But after unloading an reloading it, it worked good. ???

----Hardware / Software configuration---------------
Driver Name:kX Audio Driver (Debug)
Driver Date: Apr 20 2003 08:05:13
Driver Version: 5.10.00.3532 - debug
DB Name:none
SB0240 10k2 [c000]
PCI Information:
Device: 41102 Subsys: 10021102 ChipRev: 4
Card is '10k2'
Card has MPU device
Card model is '5.1'
Card is Audigy2-compatible
Card HAS AC97 codec
Codec name: SigmaTel STAC9721/23
3D Extension: SigmaTel 3D Enhancement
Codec is 2.0 compliant
Capabilities[6940] :
DAC resolutions : -16-bit- -18-bit-
ADC resolutions : -16-bit- -18-bit-
Ext Capabilities [200]: -slot/DAC mappings-
Port: c000 Irq: 14
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148]
----------------------------------------------------

bugbug · Apr 24, 2003, 01:14 AM

two new screen dumps:
http://www.dietcocaine.com/images/kx3.JPG
http://www.dietcocaine.com/images/kx4.JPG

I have line-in on the ac97 page muted and turned all the way down.
I have the ac97 slider on the recording page muted and turned all the way down.

I can still hear the source sound through my line-in at 100%. It should be silent. The only way I can make it silent is to mute the ac97 slider on the 'In n Outs' page but if I do that the recording is muted and nothing is recorded.

Quote:

Originally posted by Eugene Gavrilov
>>I drew red boxes around the sliders in question. Its doesnt matter what I set these sliders to. They
>>are 100% all the time. I dont know how to be more detailed than to say they dont work at all. It
>>doesnt matter if the line-in slider is all the way down or all the way up. This makes it impossible to
>>lower what I hear from the line in without lowering the recording level. This problem doesnt exist in
>>3531 and earlier

the 'ac97 line in' slider is to be =muted= [on the 'ac97' page]
evey ac97 source is to be muted. you have 'line-in' already selected as ac97 source

try toggling 'ac97 in' mute on and off again [on the 'recording' page]

/Eugene

**Eugene Gavrilov** · Apr 24, 2003, 02:10 AM

Quote:

>>you seem to be using 3532-a, not "-b"

>> Robert McClelland
>> Um no Eugene I'm using B verison and still getting that error change mode

this was addressed to eyagos

so, back to SPDIF freq. issue:

>> is it solved? no? what version? was it functional before? when?

?

please give as detailed report as you can

I suggest we start a new thread ('SPDIF Frequency on audigy')

kxctrl thing:
cards are numbered starting with '0'
so, use 'kxctrl $1' instead of '$2'

>> ac97 stuff

please re-read our help file (the 'recording' section)
this was discussed many times already...

/Eugene

Robert McClelland · Apr 24, 2003, 02:50 AM

3532-B I been using that updated still doesn't change SPDIF mode at all let you know bud error said error setting SPDIF frequency, when trying change to 9600 mode. eyagos make sure you enable your router stuff turn on true 3d mode for games

eyagos · Apr 24, 2003, 05:34 AM

Eugene, 'kxctrl $0' or 'kxctrl $1' doesn't works for me. I still can't select the second card (Audigy2), so I cant post any results.

Robert, 'make sure you enable your router stuff turn on true 3d mode for games' ??. What do you mena?

Robert McClelland · Apr 24, 2003, 07:43 PM

Bring up the router then click on the AC-3 and wave and everthing you see in that router and click on stuff then turn up all the volume up on everthing that in the router

bugbug · Apr 25, 2003, 05:07 AM

After uninstalling the kx drivers...then reinstalling 3530...and then reinstalling 3532 the problem I described is fixed.

cheers

Apr 21, 2003, 12:54 AM	#1
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	3532-b released hi there 3532-b internal development built released the changelog: Pseudo Mic-in slider for Windows Mixer added (for compatibility only)<br> Fixed bug with Windows Mixer - kX Mixer notifications (redraw)<br> Fixed bug with 'Reset global settings'<br> SPDIF-In AC-3 decoding implemented for 10k2-based boards (alpha: high latency...)<br> New CLEAX3Reverb effect added ('Concert hall' preset)<br> New Stereo Mix + Gain effect added<br> Improved SoundFont formulas<br> Fixed bug with clicks when using Vienna<br> also improved multicard support full list of the changes since 3531 is available here: http://www.hardwareheaven.com/showthre...threadid=14197 URL: http://kx.maincore.nl/kxdrv3532b-update.exe please report any bugs concerning the new features and/or fixes. note that in general if anything is NOT mentioned in the changelog, it is NOT implemented. that is, there are no changes related to GSIF, kxmixer delays, kx remote and so on /Eugene

Apr 21, 2003, 04:45 AM	#2
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	Hey Eugene I redid installed your drivers I forget turn on router hehe Um there still bugs with your new set. I can't change the 44,000 48,000 or 96,000 it's always suck on 48,000 on the SPDIF mode. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png Last edited by Robert McClelland; Apr 21, 2003 at 07:17 PM.

Apr 21, 2003, 02:24 PM	#4
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,639 Rep Power: 69	>Moving those sliders do nothing to the actual levels. - Reread the "changelog" once more, please!!!! __________________

Apr 21, 2003, 05:14 PM	#5
gooday HardwareHeaven Junior Member Join Date: Feb 2003 Posts: 89 Rep Power: 0	There's no way back. well, when I turn back to 3531 from 3532b, it caused BSOD when I use my recording software. __________________ CPU:AMD Phenom II 550 Video :AMD 4850 @ 625/2008 Memory: 2 GB X 2 DDR1600@8-8-8-21-1T SoundCard1:SB0060 & CT4620 Mainboard:AMD 770

Apr 22, 2003, 04:14 AM	#9
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	Eugene did you ask my question I had np changing that only your new currect set that you have out in this thread __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png Last edited by Robert McClelland; Apr 22, 2003 at 04:25 AM.

Apr 21, 2003, 06:12 AM	#3
bugbug DriverHeaven Newbie Join Date: Jan 2003 Posts: 16 Rep Power: 0	Hi The line-in slider and the ac97 slider( in the recording panel) do nothing when you move them in v3532a and 3532b. Moving those sliders do nothing to the actual levels. So for example I cant lower the level of "what you hear" bug ----Hardware / Software configuration--------------- Driver Name:kX Audio Driver (Debug) Driver Date: Apr 20 2003 08:05:13 Driver Version: 5.10.00.3532 - debug DB Name:none CT4670 10k1 [d000] PCI Information: Device: 21102 Subsys: 201102 ChipRev: 5 Card has MPU device Card HAS AC97 codec Codec name: TriTech TR A5/CT1297 TAT 3D Extension: No 3D Stereo Enhancement Codec is 1.0 compliant Capabilities[0] : DAC resolutions : -16-bit- ADC resolutions : -16-bit- Ext Capabilities [0]: Port: d000 Irq: 6 Playback buffer: 20a0 Record buffer: 4000 Number of AC3 buffers: 4 Tank memory: 256 kb OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148] ----------------------------------------------------

Apr 21, 2003, 09:00 PM	Thread Starter #7
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	>> The line-in slider and the ac97 slider( in the recording panel) do nothing when you move them in v3532a and 3532b there's no 'line-in' slider on the 'recording' page btw are you sure you have unmuted the source? could you pls give a more detailed report? (in a different thread) [note that standard windows slider 'line-in' corresponds to 'ac97 in', however, 'alternate microphone' isn't a 'real' slider and doesn't do anything] /Eugene

Apr 21, 2003, 10:11 PM	#8
bugbug DriverHeaven Newbie Join Date: Jan 2003 Posts: 16 Rep Power: 0	I uploaded screen captures http://www.dietcocaine.com/images/kx1.JPG http://www.dietcocaine.com/images/kx2.JPG I drew red boxes around the sliders in question. Its doesnt matter what I set these sliders to. They are 100% all the time. I dont know how to be more detailed than to say they dont work at all. It doesnt matter if the line-in slider is all the way down or all the way up. This makes it impossible to lower what I hear from the line in without lowering the recording level. This problem doesnt exist in 3531 and earlier.

Apr 22, 2003, 04:29 AM	#10
Daniel Drummond DriverHeaven Senior Member Join Date: Dec 2002 Location: Brazil Posts: 1,137 Rep Power: 0	Robert, "note that in general if anything is NOT mentioned in the changelog, it is NOT implemented." __________________ www.palcomp3.com.br/ed

Apr 22, 2003, 06:45 AM	#11
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	ya ok just want make sure he fixes in next release of those drivers of his __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png

Apr 22, 2003, 10:48 AM	#12
eyagos DriverHeaven Addict Join Date: Dec 2002 Posts: 259 Rep Power: 0	Little Bug with devices names: My Audigy2 card (SB0240) is well identified in the mixer, and works correctly. But in the windows Device's Administator it appears as "Creative SB Audigy", and simply as "KX Wave" in the Sound Devices List. I use Windows XP. ----Hardware / Software configuration--------------- Driver Name:kX Audio Driver (Debug) Driver Date: Apr 18 2003 02:35:04 Driver Version: 5.10.00.3532 - debug DB Name:none SB0240 10k2 [c000] PCI Information: Device: 41102 Subsys: 10021102 ChipRev: 4 Card is '10k2' Card has MPU device Card model is '5.1' Card is Audigy2-compatible Card HAS AC97 codec Codec name: SigmaTel STAC9721/23 3D Extension: SigmaTel 3D Enhancement Codec is 2.0 compliant Capabilities[6940] : DAC resolutions : -16-bit- -18-bit- ADC resolutions : -16-bit- -18-bit- Ext Capabilities [200]: -slot/DAC mappings- Port: c000 Irq: 14 Playback buffer: 20a0 Record buffer: 4000 Number of AC3 buffers: 4 Tank memory: 256 kb ----------------------------------------------------

Apr 23, 2003, 12:32 AM	Thread Starter #13
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	>> Driver Date: Apr 18 2003 02:35:04 you seem to be using 3532-a, not "-b" >> I can't change the 44,000 48,000 or 96,000 it's always suck on 48,000 on the SPDIF mode. >> Eugene did you ask my question I had np changing that only your new currect set that you have out >>in this thread so, what is the present state of 'spdif freq' issue? is it solved? no? what version? was it functional before? when? btw, pls run 'kxctrl -istat' for each 'spdif freq' status and copy your 'about...->hardware/software configuration' here... /Eugene

Apr 23, 2003, 12:43 AM	Thread Starter #14
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	>>I drew red boxes around the sliders in question. Its doesnt matter what I set these sliders to. They >>are 100% all the time. I dont know how to be more detailed than to say they dont work at all. It >>doesnt matter if the line-in slider is all the way down or all the way up. This makes it impossible to >>lower what I hear from the line in without lowering the recording level. This problem doesnt exist in >>3531 and earlier the 'ac97 line in' slider is to be =muted= [on the 'ac97' page] evey ac97 source is to be muted. you have 'line-in' already selected as ac97 source try toggling 'ac97 in' mute on and off again [on the 'recording' page] /Eugene

Apr 23, 2003, 01:58 AM	#15
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	Um no Eugene I'm using B verison and still getting that error change mode. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png

Apr 23, 2003, 04:18 PM	#16
eyagos DriverHeaven Addict Join Date: Dec 2002 Posts: 259 Rep Power: 0	- Same problem as Robert: Can't change the spdif freq. But there is more, when I tried to change it, the sound has gone completely (in an Audigy2), and now there is an error mesage window each time I try to change the freq. Wait a moment...: I have been playing with the reset setings options, and now I can change the frecuencym but there is no sound yet. After restarting the sound comes back, but the problem is still there. Another thing, I use two cards, an Audigy (wich works fine) and an Audigy2. But I'm not able to get the parameters of the second one with kxctr (I have tried 'kxctrl $ 2' but nothing) - About the device names, after reinstaling drivers (updating to 3532-b), the names in the adio devices list are now correct, but I still I have the "Creative Audigy" name in the devices administrator list. - And other thing, I have detected an error with the plugins. The problem is refered to the 'skip' instruction: Yesterday a plugin I wroted was not working, and I suspect the problem was with this instruction. But after unloading an reloading it, it worked good. ??? ----Hardware / Software configuration--------------- Driver Name:kX Audio Driver (Debug) Driver Date: Apr 20 2003 08:05:13 Driver Version: 5.10.00.3532 - debug DB Name:none SB0240 10k2 [c000] PCI Information: Device: 41102 Subsys: 10021102 ChipRev: 4 Card is '10k2' Card has MPU device Card model is '5.1' Card is Audigy2-compatible Card HAS AC97 codec Codec name: SigmaTel STAC9721/23 3D Extension: SigmaTel 3D Enhancement Codec is 2.0 compliant Capabilities[6940] : DAC resolutions : -16-bit- -18-bit- ADC resolutions : -16-bit- -18-bit- Ext Capabilities [200]: -slot/DAC mappings- Port: c000 Irq: 14 Playback buffer: 20a0 Record buffer: 4000 Number of AC3 buffers: 4 Tank memory: 256 kb OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148] ---------------------------------------------------- Last edited by eyagos; Apr 23, 2003 at 04:31 PM.

Apr 24, 2003, 02:50 AM	#19
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	3532-B I been using that updated still doesn't change SPDIF mode at all let you know bud error said error setting SPDIF frequency, when trying change to 9600 mode. eyagos make sure you enable your router stuff turn on true 3d mode for games __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png

Apr 24, 2003, 05:34 AM	#20
eyagos DriverHeaven Addict Join Date: Dec 2002 Posts: 259 Rep Power: 0	Eugene, 'kxctrl $0' or 'kxctrl $1' doesn't works for me. I still can't select the second card (Audigy2), so I cant post any results. Robert, 'make sure you enable your router stuff turn on true 3d mode for games' ??. What do you mena?

Apr 24, 2003, 07:43 PM	#21
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	Bring up the router then click on the AC-3 and wave and everthing you see in that router and click on stuff then turn up all the volume up on everthing that in the router __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png

Apr 25, 2003, 05:07 AM	#22
bugbug DriverHeaven Newbie Join Date: Jan 2003 Posts: 16 Rep Power: 0	After uninstalling the kx drivers...then reinstalling 3530...and then reinstalling 3532 the problem I described is fixed. cheers