Curious routing with Audigy2

Plangin · May 13, 2003, 06:22 PM

Hello kX fans,

I own a Audigy2 since November 2002 and I was very happy when the Audigy2 support was introduced.

I use 2 ASIO applications: Traktor DJ Studio and Propellerhead Reason.

So I installed version 3530 and I was able to use ASIO and the 3 outputs with my Audigy2. But I had to use this settings to hear something:

kxctrl -sptr 76 0 400
kxctrl -sfn0 20 600000
kxctrl -sfn0 24 14
kxctrl -sfn0 20 6e0000
kxctrl -sfn0 24 ff00ff00
kxctrl -sfn0 14 10c071
kxctrl -sfn0 18 b40

Evertything worked fine and I was able to use the 3 outputs seperately without 'overlaps'.

Now I tried the 3531, 3532 and the 3533b and I was glad to see that this kxctrl commands are not necessary any more. OK.

But now I can't use the 2nd and 3rd channel any more... Well, not really. When I select 8&9 e.g. I hear the music on the 3rd output AND on the main output. But on the main output it sounds like a flanger or something.

I guess that there is a problem in the routing since 3531. I changed nothing and I tested it with ASIO and DS.

Well, then I steped back to 3530 (with Powerquest Drive Image) and the problem still persists!

Was something changed on the card?

I would be very happy about any help of you!

Thanks.

**Eugene Gavrilov** · May 13, 2003, 10:55 PM

perhaps you need to set 'Surrounder' effect to '5.1 Direct Path' mode
note that the routings were changed
read our 'routings guide' for details (on the site)

/Eugene

Plangin · May 15, 2003, 07:00 PM

Thank you very much Eugene, this helped!

I turned off the Surrounder and set the the speaker mode to 5.1.

Now everthing works fine.

May 13, 2003, 06:22 PM	#1
Plangin DriverHeaven Newbie Join Date: May 2003 Posts: 5 Rep Power: 0	Curious routing with Audigy2 Hello kX fans, I own a Audigy2 since November 2002 and I was very happy when the Audigy2 support was introduced. I use 2 ASIO applications: Traktor DJ Studio and Propellerhead Reason. So I installed version 3530 and I was able to use ASIO and the 3 outputs with my Audigy2. But I had to use this settings to hear something: kxctrl -sptr 76 0 400 kxctrl -sfn0 20 600000 kxctrl -sfn0 24 14 kxctrl -sfn0 20 6e0000 kxctrl -sfn0 24 ff00ff00 kxctrl -sfn0 14 10c071 kxctrl -sfn0 18 b40 Evertything worked fine and I was able to use the 3 outputs seperately without 'overlaps'. Now I tried the 3531, 3532 and the 3533b and I was glad to see that this kxctrl commands are not necessary any more. OK. But now I can't use the 2nd and 3rd channel any more... Well, not really. When I select 8&9 e.g. I hear the music on the 3rd output AND on the main output. But on the main output it sounds like a flanger or something. I guess that there is a problem in the routing since 3531. I changed nothing and I tested it with ASIO and DS. Well, then I steped back to 3530 (with Powerquest Drive Image) and the problem still persists! Was something changed on the card? I would be very happy about any help of you! Thanks.

May 13, 2003, 10:55 PM	#2
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	perhaps you need to set 'Surrounder' effect to '5.1 Direct Path' mode note that the routings were changed read our 'routings guide' for details (on the site) /Eugene

May 15, 2003, 07:00 PM	Thread Starter #3
Plangin DriverHeaven Newbie Join Date: May 2003 Posts: 5 Rep Power: 0	Thank you very much Eugene, this helped! I turned off the Surrounder and set the the speaker mode to 5.1. Now everthing works fine.