kxsynth via asio

kovzs · Jun 3, 2003, 12:45 AM

sorry for my bad english,

somewhere in this forum, i've red, that there is a possibility recording soundfonts is cubase.
maybe max wrote, if we rout the midi channels to different fxbus channels, and after connect to asio ins: it will work.
i've tried it.
first step was fxbus 2/3 (synthl/r) to asio 4/5, but cubase recorded only the right channel.

i've tried this, because fxbus 2/3 are the default synth outs.

in general: fxbus channels are mono channels, how can i record stereo samples (gm drums etc.)

thanks kovzs

**Eugene Gavrilov** · Jun 4, 2003, 12:24 AM

>> first step was fxbus 2/3 (synthl/r) to asio 4/5, but cubase recorded only the right channel.
>> i've tried this, because fxbus 2/3 are the default synth outs.
>> fxbus channels are mono channels, how can i record stereo samples (gm drums etc.)

synth is stereo (fxbus 2/3) and there should be no problem recording it in 'stereo'
(that is, each note is panned between fxbus2 and fxbus3)
try different asio inputs (especially if you have a '5.1' live board), for instance, asio8,9 ('In 5 L/R')

make sure you pan your synth correctly via MIDI controllers (should be ok by default)

make sure you record in stereo (in cubase)

/Eugene

france666reds · Jun 4, 2003, 04:25 PM

in this way i can record simultaneously different Soundfonts tracks to different audio tracks using more than 2 ASIO inputs?
of course in SX.

francesco

Daniel Drummond · Jun 4, 2003, 07:54 PM

What you did works perfectly for me (live CT4760) "first step was fxbus 2/3 (synthl/r) to asio 4/5, but cubase recorded only the right channel. "

france666reds · Jun 5, 2003, 09:34 AM

might be a problem of panning or a problem of soundfonts drivers?

kovzs · Jun 5, 2003, 11:48 PM

Thanks for the replies

I use Cubase VST/32 and when I've tried the asio recording win98/se. I connected fxbus2/3 to asio
Eugene wrote. Cubase recorded only the right channel, too.
In the beginig of this week i get Windows ME, and I tried it again with the same DSP settings, The right channel only

Yesterday i bought Windows XP and I tried it again.
Now the stereo asio recording works

Thanks again.

Jun 3, 2003, 12:45 AM	#1
kovzs DriverHeaven Newbie Join Date: May 2003 Location: Hungary , Diosd Posts: 9 Rep Power: 0	kxsynth via asio sorry for my bad english, somewhere in this forum, i've red, that there is a possibility recording soundfonts is cubase. maybe max wrote, if we rout the midi channels to different fxbus channels, and after connect to asio ins: it will work. i've tried it. first step was fxbus 2/3 (synthl/r) to asio 4/5, but cubase recorded only the right channel. i've tried this, because fxbus 2/3 are the default synth outs. in general: fxbus channels are mono channels, how can i record stereo samples (gm drums etc.) thanks kovzs __________________ kovZs

Jun 4, 2003, 07:54 PM	#4
Daniel Drummond DriverHeaven Senior Member Join Date: Dec 2002 Location: Brazil Posts: 1,137 Rep Power: 0	What you did works perfectly for me (live CT4760) "first step was fxbus 2/3 (synthl/r) to asio 4/5, but cubase recorded only the right channel. " __________________ www.palcomp3.com.br/ed

Jun 5, 2003, 11:48 PM	Thread Starter #6
kovzs DriverHeaven Newbie Join Date: May 2003 Location: Hungary , Diosd Posts: 9 Rep Power: 0	Thanks for the replies I use Cubase VST/32 and when I've tried the asio recording win98/se. I connected fxbus2/3 to asio Eugene wrote. Cubase recorded only the right channel, too. In the beginig of this week i get Windows ME, and I tried it again with the same DSP settings, The right channel only Yesterday i bought Windows XP and I tried it again. Now the stereo asio recording works Thanks again. __________________ kovZs

Jun 4, 2003, 12:24 AM	#2
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	>> first step was fxbus 2/3 (synthl/r) to asio 4/5, but cubase recorded only the right channel. >> i've tried this, because fxbus 2/3 are the default synth outs. >> fxbus channels are mono channels, how can i record stereo samples (gm drums etc.) synth is stereo (fxbus 2/3) and there should be no problem recording it in 'stereo' (that is, each note is panned between fxbus2 and fxbus3) try different asio inputs (especially if you have a '5.1' live board), for instance, asio8,9 ('In 5 L/R') make sure you pan your synth correctly via MIDI controllers (should be ok by default) make sure you record in stereo (in cubase) /Eugene

Jun 4, 2003, 04:25 PM	#3
france666reds let the music playing Join Date: Mar 2003 Location: italy Posts: 36 Rep Power: 0	in this way i can record simultaneously different Soundfonts tracks to different audio tracks using more than 2 ASIO inputs? of course in SX. francesco

Jun 5, 2003, 09:34 AM	#5
france666reds let the music playing Join Date: Mar 2003 Location: italy Posts: 36 Rep Power: 0	might be a problem of panning or a problem of soundfonts drivers?