g000fy

i just got this last thursday so im still messing around with it then after i get it down will put kx drivrs on as i know they will be better for what i want to do with this sound card...if kx does support 24/96 recording and there is no more noise on the inputs with nothing connected.

anyhow here is my questions
i use ableton live 7 and when i select asio there are a few choices....if i select "creative asio" or "creative asio audigy 2 zs" or something like that and then i go into the "input and output" sections to turn off and on what inputs and outputs i want to use i see 20 ins and 20 outs....i know for sure i see 20 ins and i think i seen 20 outs.

ANYHOW

has anyone made a map i can look out to see which input number goes to what jack on audigy 2 zs platinu pro?

i hope someone made one up.

ex:
i turn on all the inputs and outputs both mono and stereo.

ext in (channels 17/18) goto line-in 1
ext in (channels 1/2) goto line-in 2

i mean its random....they are in same spot everytime but there is no logic in the ordering that i can see.

i know there are midi inputs, coax, optical, line-in`s and mic-in just on the i/o box and now if we count the ones on the sound card itself i know there is spdif and an aux-in

i dont know i hope someone mapped this all out.

g000fy

ok i got some of it done.
if anyone wants to help step right in.

SB AUDIGY 2 ZS ASIO (C000)
EXT-IN`s:

01/02 (Line-in 2 = 1/4" Cable)
03/04 (anytime you record or play this works)
05/06 (anytime you record or play this works)
19/20 (Line-in 3 = RCA on back "NOT COAX")
15/16 (shared* coax-IN on back and optical-IN on front)
17/18 (Line-in 1 = 1/4" Cable and Mic-in)

http://www.imagecoast.com/images/en1gma/20inputs.jpg

the pic is so you can see what im talking about.


SB AUDIGY 2 ZS ASIO 24/96 (C000)
EXT-IN`s:

01/02 (Line-in 1 = 1/4" Cable and Mic-in)
03/04 (Line-in 2 = 1/4" Cable)
05/06 (Line-in 3 = RCA on back "NOT COAX")

http://www.imagecoast.com/images/en1gma/2496.jpg

that last set is alot easier to understand but it dont show no optical or coax ins.

Maddogg6

Maybe this will make things a little simpler....

Ableton seems to 'rename' kX ASIO inputs and outs...
kX ASIO 0/1 = 1/2 in Ableton

So, subtract 1 from what ableton calls it, and it *should* correspond to kX ASIO..
kX ASIO INPUTS in kX DSP (audio sent to abletons AUDIO INPUT)

Assuming Default DSP config...
kX Mixer Record Settings = kX ASIO 0/1 (on Epilog) = Abelton Input 1/2
AC97 Input = kX ASIO 2/3 = Ableton Input 3/4
CD SPDIF Input = kX ASIO 4/5 = Ableton 5/6
I2S / SPDIF C = kX ASIO 6/7 = Ableton 7/8
Coax/Optical SPDIF = kX ASIO 8/9 = Ableton 9/10
.
.
.

Look at kX DSP Prolog - and how they connect to the ASIO ins of EPILOG.

Even easier - play something on an input, and you can see level on that input in Abletons INPUT selector.

Too bad ableton does not allow renaming the IO....