I get no sound from my center speaker ? [Audigy]

x0ph3r · Jun 15, 2003, 01:00 AM

I got an Audigy.. using 3533b drivers and no sound from the center speaker.

----Hardware / Software configuration---------------
Drivrutinsnamn:kX Audio Driver (Debug)
Datum: May 28 2003 00:28:30
Version på drivrutin: 5.10.00.3533 - debug
DB-namn:LiveBay1
SB0090 10k2 [d400]
PCI Information:
Device: 41102 Subsys: 511102 ChipRev: 3
Kortmodellen är '10k2'
Card has MPU device
Kortmodellen är '5.1'
Card HAS AC97 codec
Codec name: TriTech TR A5/CT1297 TAT
3D Extension: No 3D Stereo Enhancement
Codec is 1.0 compliant
Capabilities[0] :
DAC resolutions : -16-bit-
ADC resolutions : -16-bit-
Ext Capabilities [0]:
Port: d400 Irq: 6
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
GSIF buffer: 512 samples
OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148]
----------------------------------------------------

Theres some info.. Thanks in advance.

x0ph3r · Jun 16, 2003, 12:00 AM

*bump* :/

**Eugene Gavrilov** · Jun 16, 2003, 12:21 AM

probably, incorrect 'surrounder' setting

/E

x0ph3r · Jun 16, 2003, 01:02 AM

Ive got it at "5.1 Movie Mode" But it doesnt work at any other 5.1 mode either

Any more ideas ?

Mata Hari · Jun 16, 2003, 02:51 AM

Connected analog or digitally?
if digital, and using a creative dtt3500 or similar, select the correct mode on the decoder... (dont have my own here handy, so I can't tell you what the correct setting is... I thought pcm multichannel and 5.1 mode or something)

x0ph3r · Jun 16, 2003, 10:02 AM

Analog connection :/

Mata Hari · Jun 16, 2003, 02:16 PM

Hmz, try the sound generator plugin in the dsp, and connect it directly to the analog center out of the epilog... check if you get sound then... if not, I guess you have checked the speaker/cable to the speaker itself?

did it work on creatives driver?

Max M. · Jun 16, 2003, 03:12 PM

his hardware, cables and jacks are ok - since he is able to hear center when "5.1 movie" preset is selected...
(maybe he just waits for center when listening to stereo files? ;)

x0ph3r · Jun 16, 2003, 03:49 PM

"...when listening to stereo files" - nah :P I dont get the center when I press "Test" in kX-mixer, only front right/left and rear right/left.

And my cables are right :P

Edit: Oh and yes, It worked with the creative drivers

**Eugene Gavrilov** · Jun 16, 2003, 06:53 PM

check/uncheck 'swap front & rear' and 'route headphones to c/sw' settings
also 'reset settings'
and, as suggested, connect a sound generator (or FXBus 0,1) to epilog's analog center/lfe
[and start any wave playback]

/E

x0ph3r · Jun 16, 2003, 07:12 PM

Hmm I think I did what you said but no, no sound now either.. :/

Mata Hari · Jun 17, 2003, 12:02 AM

--deleted, never mind, didnt read correctly-- :-)

x0ph3r · Jun 18, 2003, 06:04 PM

*bump*

**Eugene Gavrilov** · Jun 20, 2003, 03:38 AM

btw, does 'LFE' channel work?

pls check the following, too:
turn on 'router headphones to center/lfe' and check if you can hear your 'front left/front right' via 'center/lfe' jack

/E

x0ph3r · Jun 21, 2003, 08:25 PM

Nope, no sound.

**Eugene Gavrilov** · Jun 23, 2003, 12:54 AM

try to re-install Creative drivers and re-check center/lfe
(perhaps, you got your audio output damaged...)
if it works ... hm... I have the same audigy board as you have -- and it works here...
and I have the same ac97 codec -- so, I doubt this is a driver problem

/Eugene

x0ph3r · Jun 27, 2003, 01:55 PM

Ok, Ill try that, as soon as I get my new hdd, my old one broke :/

Thanks for the help anyway.

x0ph3r · Jul 1, 2003, 03:44 PM

Hmm, could it be DX9 ?

I just reinstalled win xp and it worked fine, then I installed dx9 and now I cant here my center/subw. again :/

**Eugene Gavrilov** · Jul 5, 2003, 04:09 AM

re-set 'hardware acceleration' and 'speaker configuration' in the control panel
(as well as sound quality)

/E

x0ph3r · Jul 5, 2003, 10:03 AM

Hmm, Now I installed win 2003 dx9a an everything . And it works !

Now I won't touch anything for a while

Thanks for the effort anyway !

Jun 15, 2003, 01:00 AM	#1
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	I get no sound from my center speaker ? [Audigy] I got an Audigy.. using 3533b drivers and no sound from the center speaker. ----Hardware / Software configuration--------------- Drivrutinsnamn:kX Audio Driver (Debug) Datum: May 28 2003 00:28:30 Version på drivrutin: 5.10.00.3533 - debug DB-namn:LiveBay1 SB0090 10k2 [d400] PCI Information: Device: 41102 Subsys: 511102 ChipRev: 3 Kortmodellen är '10k2' Card has MPU device Kortmodellen är '5.1' Card HAS AC97 codec Codec name: TriTech TR A5/CT1297 TAT 3D Extension: No 3D Stereo Enhancement Codec is 1.0 compliant Capabilities[0] : DAC resolutions : -16-bit- ADC resolutions : -16-bit- Ext Capabilities [0]: Port: d400 Irq: 6 Playback buffer: 20a0 Record buffer: 4000 Number of AC3 buffers: 4 Tank memory: 256 kb GSIF buffer: 512 samples OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148] ---------------------------------------------------- Theres some info.. Thanks in advance. __________________ - x0ph3r

Jun 16, 2003, 12:00 AM	Thread Starter #2
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	bump :/ __________________ - x0ph3r

Jun 16, 2003, 01:02 AM	Thread Starter #4
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	Ive got it at "5.1 Movie Mode" But it doesnt work at any other 5.1 mode either Any more ideas ? __________________ - x0ph3r

Jun 16, 2003, 10:02 AM	Thread Starter #6
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	Analog connection :/ __________________ - x0ph3r

Jun 16, 2003, 03:12 PM	#8
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,639 Rep Power: 69	his hardware, cables and jacks are ok - since he is able to hear center when "5.1 movie" preset is selected... (maybe he just waits for center when listening to stereo files? ;) __________________

Jun 16, 2003, 12:21 AM	#3
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	probably, incorrect 'surrounder' setting /E

Jun 16, 2003, 02:51 AM	#5
Mata Hari HardwareHeaven Lover Join Date: Feb 2003 Posts: 213 Rep Power: 0	Connected analog or digitally? if digital, and using a creative dtt3500 or similar, select the correct mode on the decoder... (dont have my own here handy, so I can't tell you what the correct setting is... I thought pcm multichannel and 5.1 mode or something)

Jun 16, 2003, 02:16 PM	#7
Mata Hari HardwareHeaven Lover Join Date: Feb 2003 Posts: 213 Rep Power: 0	Hmz, try the sound generator plugin in the dsp, and connect it directly to the analog center out of the epilog... check if you get sound then... if not, I guess you have checked the speaker/cable to the speaker itself? did it work on creatives driver?

Jun 16, 2003, 03:49 PM	Thread Starter #9
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	"...when listening to stereo files" - nah :P I dont get the center when I press "Test" in kX-mixer, only front right/left and rear right/left. And my cables are right :P Edit: Oh and yes, It worked with the creative drivers __________________ - x0ph3r

Jun 16, 2003, 06:53 PM	#10
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	check/uncheck 'swap front & rear' and 'route headphones to c/sw' settings also 'reset settings' and, as suggested, connect a sound generator (or FXBus 0,1) to epilog's analog center/lfe [and start any wave playback] /E

Jun 16, 2003, 07:12 PM	Thread Starter #11
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	Hmm I think I did what you said but no, no sound now either.. :/ __________________ - x0ph3r

Jun 17, 2003, 12:02 AM	#12
Mata Hari HardwareHeaven Lover Join Date: Feb 2003 Posts: 213 Rep Power: 0	--deleted, never mind, didnt read correctly-- :-)

Jun 18, 2003, 06:04 PM	Thread Starter #13
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	bump __________________ - x0ph3r

Jun 20, 2003, 03:38 AM	#14
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	btw, does 'LFE' channel work? pls check the following, too: turn on 'router headphones to center/lfe' and check if you can hear your 'front left/front right' via 'center/lfe' jack /E

Jun 21, 2003, 08:25 PM	Thread Starter #15
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	Nope, no sound. __________________ - x0ph3r

Jun 23, 2003, 12:54 AM	#16
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	try to re-install Creative drivers and re-check center/lfe (perhaps, you got your audio output damaged...) if it works ... hm... I have the same audigy board as you have -- and it works here... and I have the same ac97 codec -- so, I doubt this is a driver problem /Eugene

Jun 27, 2003, 01:55 PM	Thread Starter #17
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	Ok, Ill try that, as soon as I get my new hdd, my old one broke :/ Thanks for the help anyway. __________________ - x0ph3r

Jul 1, 2003, 03:44 PM	Thread Starter #18
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	Hmm, could it be DX9 ? I just reinstalled win xp and it worked fine, then I installed dx9 and now I cant here my center/subw. again :/ __________________ - x0ph3r

Jul 5, 2003, 04:09 AM	#19
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	re-set 'hardware acceleration' and 'speaker configuration' in the control panel (as well as sound quality) /E

Jul 5, 2003, 10:03 AM	Thread Starter #20
x0ph3r DriverHeaven Junior Member Join Date: Dec 2002 Location: Finland Posts: 47 Rep Power: 0	Hmm, Now I installed win 2003 dx9a an everything . And it works ! Now I won't touch anything for a while Thanks for the effort anyway ! __________________ - x0ph3r