no sound

vovanxp · Sep 3, 2009, 08:08 AM

Audigy 2 Value (SB0350). OS windows XP, driver kxdrv3549-x86-full.exe

In headphones no sound. ????

LordShade · Sep 3, 2009, 12:07 PM

Try to use the checkbox "Toggle Route headphones to Center/Subwoofer mode" at first screenshot and then insert headphones connector into the center/subwoofer output of your card.

vovanxp · Sep 3, 2009, 12:46 PM

Quote:

Originally Posted by LordShade

Try to use the checkbox "Toggle Route headphones to Center/Subwoofer mode" at first screenshot and then insert headphones connector into the center/subwoofer output of your card.

I tried, but it doesn`t work

vovanxp · Sep 4, 2009, 12:34 PM

??????????????

Russ · Sep 5, 2009, 10:34 AM

I am not sure what you were trying originally, but I suggest connecting your headphones to the jack for analog front (the green jack) as that is the only one (on the rear of the card) that is intended to be used with headphones. If you do this, also make sure that the "Toggle 'Swap Front and Rear' mode" option is not enabled.

BTW: You never mentioned whether or not you are able to get sound from the same jack when using speakers.

vovanxp · Sep 6, 2009, 02:58 PM

disableby default "Digital Output Only". "Digital Output Only' mode" option is enabled. Thanks

Russ · Sep 6, 2009, 05:55 PM

Quote:

Originally Posted by vovanxp

enabled by default "Digital Output Only". "Digital Output Only' mode" option is not disable. Thanks

What do you mean? It is not enabled in the 1st picture that you posted...

vovanxp · Sep 6, 2009, 07:10 PM

"Digital Output Only' mode" option is enabled

Russ · Sep 6, 2009, 07:44 PM

Quote:

Originally Posted by vovanxp

"Digital Output Only' mode" option is enabled

OK, I can see that, but it was not enabled in the first picture... In any case, what exactly is the issue that you are having? Are you saying that you enabled DOO mode and now you cannot disable it? As far as I know, DOO mode does not do anything on SB0350.

BTW: SB0350 is an Audigy 2 ZS.

Sep 3, 2009, 08:08 AM	#1
vovanxp HardwareHeaven Newbie Join Date: Sep 2009 Posts: 12 Rep Power: 0	no sound Audigy 2 Value (SB0350). OS windows XP, driver kxdrv3549-x86-full.exe In headphones no sound. ???? Attached Thumbnails

Sep 3, 2009, 12:07 PM	#2
LordShade DriverHeaven Newbie Join Date: Aug 2009 Posts: 10 Rep Power: 0	Re: no sound Try to use the checkbox "Toggle Route headphones to Center/Subwoofer mode" at first screenshot and then insert headphones connector into the center/subwoofer output of your card.

Sep 4, 2009, 12:34 PM	Thread Starter #4
vovanxp HardwareHeaven Newbie Join Date: Sep 2009 Posts: 12 Rep Power: 0	Îòâåò: no sound ??????????????

Sep 5, 2009, 10:34 AM	#5
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,507 Rep Power: 61	Re: no sound I am not sure what you were trying originally, but I suggest connecting your headphones to the jack for analog front (the green jack) as that is the only one (on the rear of the card) that is intended to be used with headphones. If you do this, also make sure that the "Toggle 'Swap Front and Rear' mode" option is not enabled. BTW: You never mentioned whether or not you are able to get sound from the same jack when using speakers. Last edited by Russ; Sep 5, 2009 at 10:50 AM.

Sep 6, 2009, 02:58 PM	Thread Starter #6
vovanxp HardwareHeaven Newbie Join Date: Sep 2009 Posts: 12 Rep Power: 0	Îòâåò: no sound disableby default "Digital Output Only". "Digital Output Only' mode" option is enabled. Thanks Last edited by vovanxp; Sep 6, 2009 at 07:08 PM.

Sep 6, 2009, 07:10 PM	Thread Starter #8
vovanxp HardwareHeaven Newbie Join Date: Sep 2009 Posts: 12 Rep Power: 0	Îòâåò: no sound "Digital Output Only' mode" option is enabled Attached Thumbnails