FXBus quantity

kammajaega · Sep 12, 2009, 06:25 PM

Hi,

the new drivers do not allow to send the Wave/ Asio signal in kXRouter to others than the first 15 channels, FXBus 0-15.

Since these are system reserved busses, as far as I understood, you don't have enough free connections to do some routing.

I tried to change busses within the first 15 to free up 2 busses for an Asio connection, but it didn't work in the new driver release 3549.

workaround:
I've installed version 3541 and I'm able to route to all 63 FXbusse. (Is that really all posssible fxbusses...?)

that way I'm able to route

Asio kX Out 0 - fxbus20
Asio kX Out 1 - fxbus21

and listen to Asio sound via kXAsio again!

http://img525.imageshack.us/img525/9...outerv3541.jpg

Is there a way to make the fxbusses available through konsole in the new releases? It would be great to use Features like "Smart Connections turn off".

kind regards

KJ

Russ · Sep 12, 2009, 06:51 PM

24 bit support needs more than 1 bus for each stream, so there are less free busses available. In any case you should not have to free up busses for ASIO, because in most scenarios you would not be using the wave driver and ASIO driver at the same time.

http://www.hardwareheaven.com/general-...y-audigy2.html

kammajaega · Sep 14, 2009, 04:51 PM

Hi Russ,

thanks for the post.
do have an idea, where ASIO Sound is gone when updating from 3541 to 3549?
When selecting kXAsio, I don't get any sound. I've searched all fxbusses for a signal... .
I tried Asio4all and kX_v3541 and get sound.

Russ · Sep 14, 2009, 05:48 PM

What OS are you using?
Did you uninstall the previous version of kX before installing the new version?

kammajaega · Sep 14, 2009, 06:00 PM

winXP pro SP2

yes, I've uninstalled the previous version before installing the update.

First I thought, the reason for not getting sound is that I use two cards, but even after removing one card from the system, I still don't get ASIO sound.

Until now, only switching back to version 3541 and changing ASIO bus 1 & 2 to fxbus 20/21 results in ASIO output.

nevermind

version 3541 is fine for me.

I will test this someday again... .

Thanks for your readiness to help me!

I will think about hosting a "versiontracker" for kXdrivers, when EG agrees.

Russ · Sep 14, 2009, 06:06 PM

I have not tried 3549, but ASIO works fine for me in 3548 (and 3545b, etc) with the default routing in kX Router (SB0090 - Windows XP SP2).

Are you loading an old DSP config or are you testing with the default DSP config? Newer versions of kX use FxBusX instead of FxBus (and a new version of epilog) with 10k2 models, so older configs may not be compatible.

BTW: I also have 2 cards installed (SB0090 and SB0228).

kammajaega · Sep 21, 2009, 10:40 PM

I've got it

, but don't have a solution...

I have installed Version 3550:

I always start from scratch after installing an update.

I clear the DSP completely and then, my basic setup is:

- ProFX "src" for input (set to fxbus 0/1)
- Basis "FXMix" as mixer and vol adjustment
and
- ProFX "k2lt" for output routing

that's all.

Now, there is NO sound on ASIO.

When I use FXBusX instead of "src" I get ASIO sound on fxbus 0/1.

Thanks for your answers RUSS!

Dear developers, please make "src" usable again 100%!

Russ · Sep 22, 2009, 04:37 AM

AFAIK, the bundled version of ProFX is still the old version and does not support the 24 bit stuff. Install the latest version of ProFX (see here) and you should be good to go...

kammajaega · Sep 22, 2009, 01:26 PM

thank you so much!!!

Sep 12, 2009, 06:25 PM	#1
kammajaega DriverHeaven Junior Member Join Date: Dec 2002 Location: Berlin Germany Posts: 25 Rep Power: 0	FXBus quantity Hi, the new drivers do not allow to send the Wave/ Asio signal in kXRouter to others than the first 15 channels, FXBus 0-15. Since these are system reserved busses, as far as I understood, you don't have enough free connections to do some routing. I tried to change busses within the first 15 to free up 2 busses for an Asio connection, but it didn't work in the new driver release 3549. workaround: I've installed version 3541 and I'm able to route to all 63 FXbusse. (Is that really all posssible fxbusses...?) that way I'm able to route Asio kX Out 0 - fxbus20 Asio kX Out 1 - fxbus21 and listen to Asio sound via kXAsio again! http://img525.imageshack.us/img525/9...outerv3541.jpg Is there a way to make the fxbusses available through konsole in the new releases? It would be great to use Features like "Smart Connections turn off". kind regards KJ __________________ LPR KJ

Sep 12, 2009, 06:51 PM	#2
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,507 Rep Power: 61	Re: FXBus quantity 24 bit support needs more than 1 bus for each stream, so there are less free busses available. In any case you should not have to free up busses for ASIO, because in most scenarios you would not be using the wave driver and ASIO driver at the same time. http://www.hardwareheaven.com/general-...y-audigy2.html Last edited by Russ; Sep 12, 2009 at 07:05 PM. Reason: add link

Sep 14, 2009, 04:51 PM	Thread Starter #3
kammajaega DriverHeaven Junior Member Join Date: Dec 2002 Location: Berlin Germany Posts: 25 Rep Power: 0	Re: FXBus quantity Hi Russ, thanks for the post. do have an idea, where ASIO Sound is gone when updating from 3541 to 3549? When selecting kXAsio, I don't get any sound. I've searched all fxbusses for a signal... . I tried Asio4all and kX_v3541 and get sound. __________________ LPR KJ

Sep 14, 2009, 05:48 PM	#4
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,507 Rep Power: 61	Re: FXBus quantity What OS are you using? Did you uninstall the previous version of kX before installing the new version?

Sep 14, 2009, 06:00 PM	Thread Starter #5
kammajaega DriverHeaven Junior Member Join Date: Dec 2002 Location: Berlin Germany Posts: 25 Rep Power: 0	Re: FXBus quantity winXP pro SP2 yes, I've uninstalled the previous version before installing the update. First I thought, the reason for not getting sound is that I use two cards, but even after removing one card from the system, I still don't get ASIO sound. Until now, only switching back to version 3541 and changing ASIO bus 1 & 2 to fxbus 20/21 results in ASIO output. nevermind version 3541 is fine for me. I will test this someday again... . Thanks for your readiness to help me! I will think about hosting a "versiontracker" for kXdrivers, when EG agrees. __________________ LPR KJ

Sep 14, 2009, 06:06 PM	#6
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,507 Rep Power: 61	Re: FXBus quantity I have not tried 3549, but ASIO works fine for me in 3548 (and 3545b, etc) with the default routing in kX Router (SB0090 - Windows XP SP2). Are you loading an old DSP config or are you testing with the default DSP config? Newer versions of kX use FxBusX instead of FxBus (and a new version of epilog) with 10k2 models, so older configs may not be compatible. BTW: I also have 2 cards installed (SB0090 and SB0228). Last edited by Russ; Sep 14, 2009 at 06:58 PM.

Sep 21, 2009, 10:40 PM	Thread Starter #7
kammajaega DriverHeaven Junior Member Join Date: Dec 2002 Location: Berlin Germany Posts: 25 Rep Power: 0	Re: FXBus quantity I've got it , but don't have a solution... I have installed Version 3550: I always start from scratch after installing an update. I clear the DSP completely and then, my basic setup is: - ProFX "src" for input (set to fxbus 0/1) - Basis "FXMix" as mixer and vol adjustment and - ProFX "k2lt" for output routing that's all. Now, there is NO sound on ASIO. When I use FXBusX instead of "src" I get ASIO sound on fxbus 0/1. Thanks for your answers RUSS! Dear developers, please make "src" usable again 100%! __________________ LPR KJ

Sep 22, 2009, 04:37 AM	#8
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,507 Rep Power: 61	Re: FXBus quantity AFAIK, the bundled version of ProFX is still the old version and does not support the 24 bit stuff. Install the latest version of ProFX (see here) and you should be good to go... Last edited by Russ; Sep 22, 2009 at 04:53 AM.

Sep 22, 2009, 01:26 PM	Thread Starter #9
kammajaega DriverHeaven Junior Member Join Date: Dec 2002 Location: Berlin Germany Posts: 25 Rep Power: 0	Re: FXBus quantity thank you so much!!! __________________ LPR KJ