Audidgy 2 ZS Notebook

silvertones · Nov 22, 2009, 09:05 PM

Please forgive me for this question. I been away for some time. I tried a search but too much water over the dam for me to find the answer. I've been without KX since my Desktop died a year ago. I only have a Lappy with the A2ZSNB. It's a Toshiba PIV 3.0 2G Ram. XP Pro SP3. What version of KX can I use. I need both in and out.
Thanks so much. I do hope to get back using these great drivers. I could do so much.

Tyrsonswood · Nov 22, 2009, 10:48 PM

The latest is 3550, it runs fine under XP SP3. I had switched from 3545 which also run well.

Lex Nahumury · Nov 23, 2009, 08:48 AM

Yep, definatly use the latest driver release and check;
http://www.hardwareheaven.com/bug-repo...ok-issues.html

silvertones · Nov 23, 2009, 12:23 PM

Awesome guys and thank you!

I will keep you posted on how it goes. Good bye CL

silvertones · Nov 23, 2009, 04:33 PM

So far it's working fabulously. Just the way my 5.1 card did. Inputs aren't noisy ,outputs are very clean with great fidelity and the best part is I can have effects enabled in the input. I'm using 2 pairs of outputs from my audio application. One for drums & one for the other instruments. I use the other pair as effects returns. I use the line input as the effects send and also the recording input. I was using 3 cards to do this and also had to use another application as a host for the effects. The clarity of the playback far exceeds the CL drivers.
Can you tell I'm thrilled!!!!!!!!!!

Tyrsonswood · Nov 23, 2009, 04:40 PM

Nice! Glad it's working out for you.

silvertones · Nov 28, 2009, 08:18 PM

One thing I can't seem to get working is playback using ASIO. I choose ASIO 00,01 in my app but no sound. ASIO 00.01 uses the 00,01 outs of FXBus right? I have sound out of FXBus 00,01 when using WDM. What am I doing wrong?

Tyrsonswood · Nov 28, 2009, 08:29 PM

You may need to monitor the track in your app to hear it, not sure if that's what you mean.

silvertones · Nov 28, 2009, 10:04 PM

The app I'm using only has one audio port. I normally use WDM 00&01. If I switch to using ASIO & also choose 00 & 01 I should be able to hear audio because ASIO 00 & 01 are routed to the same outs as Wave 00 & o1. I don't hear anything with ASIO chosen.

Tyrsonswood · Nov 28, 2009, 10:29 PM

are you using the stock DSP or are you building your own with proFx?

silvertones · Nov 28, 2009, 11:08 PM

Built my own. Very simple. 0 & 1 to rear: 4 & 5 to C/S: SRC to front & rec l/r

Tyrsonswood · Nov 28, 2009, 11:40 PM

Are you using epilog or kl2t for your outputs and have you "wired" ASIO? (proFx has it's own ASIO module )

Also, it's a good idea to load "peak" and check your signals at various spots in the DSP when troubleshooting.

silvertones · Nov 29, 2009, 12:38 PM

I'm using epilog. I'm not trying to record via ASIO so I don't have to wire anything do I?

Tyrsonswood · Nov 29, 2009, 01:01 PM

I think if you want to use ASIO at all it needs to be connected in the DSP. I'm not sure as I've never run into what your are getting. Of course, I've never tried all options in KX drivers either....... there's much I don't know about them.

silvertones · Dec 24, 2009, 07:33 PM

Sorry I forgot to post my results.
I wasn't using the right FX Bus. I'm supposed to use FXBUSX. That fixed it.

Nov 22, 2009, 09:05 PM	#1
silvertones DriverHeaven Lover Join Date: Jul 2006 Posts: 154 Rep Power: 0	Audidgy 2 ZS Notebook Please forgive me for this question. I been away for some time. I tried a search but too much water over the dam for me to find the answer. I've been without KX since my Desktop died a year ago. I only have a Lappy with the A2ZSNB. It's a Toshiba PIV 3.0 2G Ram. XP Pro SP3. What version of KX can I use. I need both in and out. Thanks so much. I do hope to get back using these great drivers. I could do so much.

Nov 23, 2009, 08:48 AM	#3
Lex Nahumury DH Senior Member Join Date: Jan 2003 Location: The Netherlands Posts: 1,921 Rep Power: 50	Re: Audidgy 2 ZS Notebook Yep, definatly use the latest driver release and check; http://www.hardwareheaven.com/bug-repo...ok-issues.html

Nov 23, 2009, 12:23 PM	#4
silvertones DriverHeaven Lover Join Date: Jul 2006 Posts: 154 Rep Power: 0	Re: Audidgy 2 ZS Notebook Awesome guys and thank you! I will keep you posted on how it goes. Good bye CL

Nov 23, 2009, 04:33 PM	#5
silvertones DriverHeaven Lover Join Date: Jul 2006 Posts: 154 Rep Power: 0	Re: Audidgy 2 ZS Notebook So far it's working fabulously. Just the way my 5.1 card did. Inputs aren't noisy ,outputs are very clean with great fidelity and the best part is I can have effects enabled in the input. I'm using 2 pairs of outputs from my audio application. One for drums & one for the other instruments. I use the other pair as effects returns. I use the line input as the effects send and also the recording input. I was using 3 cards to do this and also had to use another application as a host for the effects. The clarity of the playback far exceeds the CL drivers. Can you tell I'm thrilled!!!!!!!!!!

Nov 28, 2009, 08:18 PM	#7
silvertones DriverHeaven Lover Join Date: Jul 2006 Posts: 154 Rep Power: 0	Re: Audidgy 2 ZS Notebook One thing I can't seem to get working is playback using ASIO. I choose ASIO 00,01 in my app but no sound. ASIO 00.01 uses the 00,01 outs of FXBus right? I have sound out of FXBus 00,01 when using WDM. What am I doing wrong?

Nov 28, 2009, 10:04 PM	#9
silvertones DriverHeaven Lover Join Date: Jul 2006 Posts: 154 Rep Power: 0	Re: Audidgy 2 ZS Notebook The app I'm using only has one audio port. I normally use WDM 00&01. If I switch to using ASIO & also choose 00 & 01 I should be able to hear audio because ASIO 00 & 01 are routed to the same outs as Wave 00 & o1. I don't hear anything with ASIO chosen.

Nov 28, 2009, 11:08 PM	#11
silvertones DriverHeaven Lover Join Date: Jul 2006 Posts: 154 Rep Power: 0	Re: Audidgy 2 ZS Notebook Built my own. Very simple. 0 & 1 to rear: 4 & 5 to C/S: SRC to front & rec l/r

Nov 29, 2009, 12:38 PM	#13
silvertones DriverHeaven Lover Join Date: Jul 2006 Posts: 154 Rep Power: 0	Re: Audidgy 2 ZS Notebook I'm using epilog. I'm not trying to record via ASIO so I don't have to wire anything do I?

Dec 24, 2009, 07:33 PM	#15
silvertones DriverHeaven Lover Join Date: Jul 2006 Posts: 154 Rep Power: 0	Re: Audidgy 2 ZS Notebook Sorry I forgot to post my results. I wasn't using the right FX Bus. I'm supposed to use FXBUSX. That fixed it.