Q about the emu aps

wingsumt · Aug 27, 2003, 03:57 PM

i want to get more output on my aps but i dot have the MOC isa card
is it possible to connet SPDIF out to the ext DAC to get the A5/A6 A7/A8 function?

if it is popssible can u tell me the pin-out infomation on the "Audio Expansion"slot.
its on the aps E-card desiged to connet the isa MOC card.

thx

sorry for my bad english @,@"

**Eugene Gavrilov** · Aug 28, 2003, 08:52 PM

unfortunately, there's no pin-out for E-mu APS available
the only solution is to test them one-by-one
note: you can burn your card!

/E

wingsumt · Aug 30, 2003, 12:51 AM

thx Eugene Gavrilov
i find that pin 6 is A5/A6 and pin 8 is A7/A8.
pin 4 and pin 7 are GND
i connect them to the sb5.1 cd_spdif in and coaxial in and they working fine

ps
i use the peak dsp plug-in to monitor the level
the A5/A6 and A7/A8 output through the sb5.1 will drag down about 1.5db than
the A1/A2 output level on E-card.
is this normal?

Max M. · Aug 30, 2003, 01:25 AM

> the sb5.1 will drag down about 1.5db than
> the A1/A2 output level on E-card.
> is this normal?

Yes, level is lost becaue of resampling (aps, live and audigy resample any signal that comes to their spdif inputs)

PITmaster · Apr 16, 2004, 05:09 PM

Quote:

Originally posted by wingsumt
thx Eugene Gavrilov
i find that pin 6 is A5/A6 and pin 8 is A7/A8.
pin 4 and pin 7 are GND
i connect them to the sb5.1 cd_spdif in and coaxial in and they working fine

Hi
I'm also the APS owner from now.
I have the SBLive5.1 too.

Are you absolutely sure about the information above?
I was trying to find the afficial specification of AUDIO EXPANSION slot but I found nothing.

So it shout looks like this:
1 2
3 (4)
5 (6)
(7 8)

Is it right?

PITmaster

wingsumt · Apr 16, 2004, 10:35 PM

yes

my APS pcb is REV 4

wingsumt

PITmaster · May 2, 2004, 06:39 PM

wingsumt,

are these outputs loud TTL signals?

PITmaster

Aug 27, 2003, 03:57 PM	#1
wingsumt DriverHeaven Newbie Join Date: May 2003 Posts: 5 Rep Power: 0	Q about the emu aps i want to get more output on my aps but i dot have the MOC isa card is it possible to connet SPDIF out to the ext DAC to get the A5/A6 A7/A8 function? if it is popssible can u tell me the pin-out infomation on the "Audio Expansion"slot. its on the aps E-card desiged to connet the isa MOC card. thx sorry for my bad english @,@"

Aug 30, 2003, 01:25 AM	#4
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,606 Rep Power: 66	> the sb5.1 will drag down about 1.5db than > the A1/A2 output level on E-card. > is this normal? Yes, level is lost becaue of resampling (aps, live and audigy resample any signal that comes to their spdif inputs) __________________

Aug 28, 2003, 08:52 PM	#2
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	unfortunately, there's no pin-out for E-mu APS available the only solution is to test them one-by-one note: you can burn your card! /E

Aug 30, 2003, 12:51 AM	Thread Starter #3
wingsumt DriverHeaven Newbie Join Date: May 2003 Posts: 5 Rep Power: 0	thx Eugene Gavrilov i find that pin 6 is A5/A6 and pin 8 is A7/A8. pin 4 and pin 7 are GND i connect them to the sb5.1 cd_spdif in and coaxial in and they working fine ps i use the peak dsp plug-in to monitor the level the A5/A6 and A7/A8 output through the sb5.1 will drag down about 1.5db than the A1/A2 output level on E-card. is this normal?

Apr 16, 2004, 10:35 PM	Thread Starter #6
wingsumt DriverHeaven Newbie Join Date: May 2003 Posts: 5 Rep Power: 0	yes my APS pcb is REV 4 wingsumt

May 2, 2004, 06:39 PM	#7
PITmaster DriverHeaven Addict Join Date: Sep 2003 Posts: 266 Rep Power: 0	wingsumt, are these outputs loud TTL signals? PITmaster