Eugene?

Robert McClelland · Sep 21, 2003, 05:40 AM

I did installed the F drivers when I ran the speaker test I still get no center sound speaker for the 5.1 but I do get a thump in the sub woofer

which right way to go but is there way turn on 5.1 center speaker since there is a thump in the sub woofer?

**Eugene Gavrilov** · Sep 22, 2003, 10:03 PM

what's your hardware configuration and speaker setting (in the Surrounder plugin)

/E

Robert McClelland · Sep 22, 2003, 10:55 PM

I have 2.1 setup in the green and two splint two sets of speakers for other one

I think we did talked about this before. lol 4.1 works fine I herd all center speakers on the test

but when trying get 5.1 center doesn't work only the thump in the sub woofer with 5.1 on

but someresaon it's right way to go lol. if not I can live with it hehe

**Eugene Gavrilov** · Sep 23, 2003, 12:01 AM

>> think we did talked about this before

definitely

your subwoofer is not connected via a separate connection (located on your card)
in order to use a separate center channel you need to connect to the 'center/lfe' connector of your card

so, if you wish to use 5.1 speaker set, you need to use all the -three- jacks of your card (front,rear,center+lfe)
choose '5.1 direct path' in the surrounder plugin

if your subwoofer is connected to the 'front' speakers, uncheck 'use subwoofer output' in the 'surrounder'

/E

Sep 21, 2003, 05:40 AM	#1
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,229 Rep Power: 193 System Specs	Eugene? I did installed the F drivers when I ran the speaker test I still get no center sound speaker for the 5.1 but I do get a thump in the sub woofer which right way to go but is there way turn on 5.1 center speaker since there is a thump in the sub woofer? __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://valid.canardpc.com/show_oc.php?id=2242746

Sep 22, 2003, 10:55 PM	Thread Starter #3
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,229 Rep Power: 193 System Specs	I have 2.1 setup in the green and two splint two sets of speakers for other one I think we did talked about this before. lol 4.1 works fine I herd all center speakers on the test but when trying get 5.1 center doesn't work only the thump in the sub woofer with 5.1 on but someresaon it's right way to go lol. if not I can live with it hehe __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://valid.canardpc.com/show_oc.php?id=2242746

Sep 22, 2003, 10:03 PM	#2
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	what's your hardware configuration and speaker setting (in the Surrounder plugin) /E

Sep 23, 2003, 12:01 AM	#4
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	>> think we did talked about this before definitely your subwoofer is not connected via a separate connection (located on your card) in order to use a separate center channel you need to connect to the 'center/lfe' connector of your card so, if you wish to use 5.1 speaker set, you need to use all the -three- jacks of your card (front,rear,center+lfe) choose '5.1 direct path' in the surrounder plugin if your subwoofer is connected to the 'front' speakers, uncheck 'use subwoofer output' in the 'surrounder' /E