Logic Audio and double notes

rymdprojekt · Aug 16, 2005, 07:16 PM

Hi!

Is there anyone who knows how not to get double notes in "Step record"

I have really tried to find an answer to this problem....very annoying

thanks for any advice....

Toadly_Ossum · Aug 16, 2005, 09:28 PM

Im not sure if this is related but i think i had a similar problem in cubase. I have a usb midi input device and also use midiox/yoke. this means i have more that one midi input device to choose from in cubase, but one of the choices is "all midi inputs". when this is selected it records two midi events when i press a key. I just have to make sure to choose a specific input and not "all midi inputs" .

I have no idea if Logic works the same.

Good Luck

Toad

**dj_stick** · Aug 17, 2005, 01:17 AM

logic, i think, opens all midi ports

you may have to specify, or modify the midi environment

philfuller · Aug 17, 2005, 01:35 AM

All Logics ins and outs are listed in the win.ini file. Try setting MidiIn_kX_Control_SB0280_10k2__d800=0
That turns off the input. (might try the output too)
You can also fix it in the environment. All inputs are summed and fed to the sequencer. You need to disable that one.

Hope this helps

dan c · Aug 17, 2005, 03:46 AM

I had same problem. Try as Philfuller said. If your using Logic. Go into Environment>Click and ports. Disconnect the cable coming out or the "Physical Input" "sum" (top connection arrow) and reconnect it from the 'Bottom' arrow on the Physical Input. Which should be the Kx Uart2.
The settings should be much the same in most sequences

rymdprojekt · Aug 17, 2005, 06:33 PM

Thanks for so many fast replies...this forum really rocks!

The thing that did it was to set the "MidiIn_kX_Control_SB0280_10k2__d800=0" in the win.ini file.

If i only modified the "Environment>Click and ports" to use the "Kx Uart2" port, then when i played midi it would all be fine and no double notes, but step record still got the doubles

If you change win.ini, the "Environment>Click and ports" should have the "SUM" port setting, otherwise the midi dont work at all...

thanks again...

Aug 16, 2005, 07:16 PM	#1
rymdprojekt DriverHeaven Junior Member Join Date: Feb 2003 Posts: 66 Rep Power: 0	Logic Audio and double notes Hi! Is there anyone who knows how not to get double notes in "Step record" I have really tried to find an answer to this problem....very annoying thanks for any advice....

Aug 17, 2005, 01:35 AM	#4
philfuller DriverHeaven Newbie Join Date: Jul 2004 Posts: 1 Rep Power: 0	Logic settings in win.ini All Logics ins and outs are listed in the win.ini file. Try setting MidiIn_kX_Control_SB0280_10k2__d800=0 That turns off the input. (might try the output too) You can also fix it in the environment. All inputs are summed and fed to the sequencer. You need to disable that one. Hope this helps Last edited by philfuller; Aug 17, 2005 at 01:45 AM. Reason: more info

Aug 16, 2005, 09:28 PM	#2
Toadly_Ossum DriverHeaven Lover Join Date: Mar 2003 Posts: 228 Rep Power: 0	Im not sure if this is related but i think i had a similar problem in cubase. I have a usb midi input device and also use midiox/yoke. this means i have more that one midi input device to choose from in cubase, but one of the choices is "all midi inputs". when this is selected it records two midi events when i press a key. I just have to make sure to choose a specific input and not "all midi inputs" . I have no idea if Logic works the same. Good Luck Toad

Aug 17, 2005, 03:46 AM	#5
dan c DriverHeaven Junior Member Join Date: Aug 2004 Posts: 31 Rep Power: 0	I had same problem. Try as Philfuller said. If your using Logic. Go into Environment>Click and ports. Disconnect the cable coming out or the "Physical Input" "sum" (top connection arrow) and reconnect it from the 'Bottom' arrow on the Physical Input. Which should be the Kx Uart2. The settings should be much the same in most sequences

Aug 17, 2005, 06:33 PM	Thread Starter #6
rymdprojekt DriverHeaven Junior Member Join Date: Feb 2003 Posts: 66 Rep Power: 0	Thanks for so many fast replies...this forum really rocks! The thing that did it was to set the "MidiIn_kX_Control_SB0280_10k2__d800=0" in the win.ini file. If i only modified the "Environment>Click and ports" to use the "Kx Uart2" port, then when i played midi it would all be fine and no double notes, but step record still got the doubles If you change win.ini, the "Environment>Click and ports" should have the "SUM" port setting, otherwise the midi dont work at all... thanks again...