Installation failure - now have no audio - please help!

nlamont · Dec 26, 2002, 01:27 PM

I have tried installing the KX drivers and now have no audio at all.
System: Win98SE, Soundcard: SB Live.

I unzipped the kxdrv3526.zip and libs.zip to a new KX folder, together with the Win98SE fix file, which I ran first.

At the end of the install procedure I had two windows up simultaneously - one asking me to reboot, the other to put in the Windows 98 CD. I rebooted. The reboot failed - the PC hung after the wallpaper was loaded. With Ctrl-Alt-Del it said two things were active - Explorer and Rundll32. I cancelled rundll32 and the reboot continued, but it said 'a required file, MCC42.dll, was not found. I copied the three dlls from the KX folder to Windows system and rebooted.

This time I didn't have the rundll32 problem, but I got a message 'error initialising your audio card'. I tried to play a WAV and an MP3 in Winamp. Both times, it failed and said 'Specifed format cannot be translated or supported'. I tried Cubase. I got an error message 'ASIO MME driver. An active audio port could not be found. Error code FE I E 0600.', then 'Not enough memory for the audio engine'.

I tried the KX mixer. It said 'If you haven't rebooted do so now, if KX install is running please ignore'.

I rebooted again. Windows seemed to pick up the new drivers for the soundcard, and at one point I had to direct it to the KX folder, which was OK.

But when I tried Winamp and Cubase again, I got the same error messages. I rebooted again and got the same rundll32 error as before.

I'm now without audio so I hope I can get rid of the KX files and get back to Creative's drivers as I need to work on some music today. I can't run 'kxsetup --clean' as in the FAQ - it's not recognised, nor is there a kx drivers entry or group anywhere in my start menu.

I'd like to try KX again if you can give me an indication of what I've done wrong.

RIV@NVX · Dec 26, 2002, 02:10 PM

Install libs into Windows\System
Installation guide (http://kxproject.spb.ru/help/setup.htm).

nlamont · Dec 26, 2002, 02:23 PM

Thanks for replying so quickly, I'll try again this afternoon.

But in the page you link to, setup.htm, I can't see any mention of extracting the libs to windows/system. Where's that? (I'll do it anyway). It also mentions, for uninstalling, going to Start Menu/Programs/kX Audio Driver select Uninstall kX Software.

I've tried the installation three times now, and this has never appeared. Could my virus scanner (MacAfee) cause the KX install program to lose control when rebooting?

RIV@NVX · Dec 26, 2002, 02:29 PM

Extracting libs is missing

My fault, I was writing this...
About antivirus - I don't know

Max M. · Dec 26, 2002, 02:30 PM

Could my virus scanner (MacAfee) cause the KX install - Yes.

nlamont · Dec 26, 2002, 05:54 PM

Finally got it installed, with your advice and the help of my son. Working ok in Cubase, but realised the change in sampling rate means I can't use it for existing songs. Created new songs using VSTi's with v little latency - great!

It seems I can switch back to ASIO multimedia driver to work on the old songs, and that's OK. Is that normal practice?

Max M. · Dec 26, 2002, 06:11 PM

Is that normal practice? - why not? it should be ok

njoha · Sep 21, 2003, 05:03 PM

I'm having the same problem with the latest official 34 package. I 've installed it too many times and even though windows don't hang at startup, I get the same message everytime, "error initialising your audio card etc. " I suppose the libs install themselves. I even tried copying all the files from system 32 to the system folder. any suggestions?

ps. no antivirus running

vikflash · Sep 22, 2003, 06:57 AM

HI
I HAD A BUG LIKE THIS, SAME ERROR MESSAGE SINCE 3534A VERSION, 26 JUNE 03

I finally succeeded to install 3535 with a small utility called debugview, Max and Eugene advices.

It seems like kx3534 and 3535 don't uninstall correctly previous versions and try to install latest drivers with 3533 libs that were not unistalled

See my previous thread to see if you're concerned (it looks like)

http://www.hardwareheaven.com/showthre...threadid=26569

Hope it helps you

Vik

vikflash · Sep 22, 2003, 07:00 AM

Hi

Eugene
May be you should look to this install problem
I thougt it was a personal bug.
But I look like not being the only one.
Vik

**Eugene Gavrilov** · Sep 22, 2003, 10:02 PM

1. 352x versions are outdated. please uses 3534 or 3535 releases

2. if you install a -previous- version above a more recent one, you will 100% get an error
you should uninstall the more recent version -completely- before installing any previous release
(by clicking ' Remove' in the kX Setup window)

/E

Dec 26, 2002, 01:27 PM	#1
nlamont DriverHeaven Newbie Join Date: Dec 2002 Posts: 3 Rep Power: 0	Installation failure - now have no audio - please help! I have tried installing the KX drivers and now have no audio at all. System: Win98SE, Soundcard: SB Live. I unzipped the kxdrv3526.zip and libs.zip to a new KX folder, together with the Win98SE fix file, which I ran first. At the end of the install procedure I had two windows up simultaneously - one asking me to reboot, the other to put in the Windows 98 CD. I rebooted. The reboot failed - the PC hung after the wallpaper was loaded. With Ctrl-Alt-Del it said two things were active - Explorer and Rundll32. I cancelled rundll32 and the reboot continued, but it said 'a required file, MCC42.dll, was not found. I copied the three dlls from the KX folder to Windows system and rebooted. This time I didn't have the rundll32 problem, but I got a message 'error initialising your audio card'. I tried to play a WAV and an MP3 in Winamp. Both times, it failed and said 'Specifed format cannot be translated or supported'. I tried Cubase. I got an error message 'ASIO MME driver. An active audio port could not be found. Error code FE I E 0600.', then 'Not enough memory for the audio engine'. I tried the KX mixer. It said 'If you haven't rebooted do so now, if KX install is running please ignore'. I rebooted again. Windows seemed to pick up the new drivers for the soundcard, and at one point I had to direct it to the KX folder, which was OK. But when I tried Winamp and Cubase again, I got the same error messages. I rebooted again and got the same rundll32 error as before. I'm now without audio so I hope I can get rid of the KX files and get back to Creative's drivers as I need to work on some music today. I can't run 'kxsetup --clean' as in the FAQ - it's not recognised, nor is there a kx drivers entry or group anywhere in my start menu. I'd like to try KX again if you can give me an indication of what I've done wrong. Last edited by nlamont; Dec 26, 2002 at 01:36 PM.

Dec 26, 2002, 02:10 PM	#2
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 67 System Specs	Install libs into Windows\System Installation guide (http://kxproject.spb.ru/help/setup.htm). __________________ -- Vedran

Dec 26, 2002, 02:29 PM	#4
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 67 System Specs	Extracting libs is missing My fault, I was writing this... About antivirus - I don't know __________________ -- Vedran

Dec 26, 2002, 02:30 PM	#5
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,606 Rep Power: 66	Could my virus scanner (MacAfee) cause the KX install - Yes. __________________

Dec 26, 2002, 06:11 PM	#7
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,606 Rep Power: 66	Is that normal practice? - why not? it should be ok __________________

Dec 26, 2002, 02:23 PM	Thread Starter #3
nlamont DriverHeaven Newbie Join Date: Dec 2002 Posts: 3 Rep Power: 0	Thanks for replying so quickly, I'll try again this afternoon. But in the page you link to, setup.htm, I can't see any mention of extracting the libs to windows/system. Where's that? (I'll do it anyway). It also mentions, for uninstalling, going to Start Menu/Programs/kX Audio Driver select Uninstall kX Software. I've tried the installation three times now, and this has never appeared. Could my virus scanner (MacAfee) cause the KX install program to lose control when rebooting?

Dec 26, 2002, 05:54 PM	Thread Starter #6
nlamont DriverHeaven Newbie Join Date: Dec 2002 Posts: 3 Rep Power: 0	Finally got it installed, with your advice and the help of my son. Working ok in Cubase, but realised the change in sampling rate means I can't use it for existing songs. Created new songs using VSTi's with v little latency - great! It seems I can switch back to ASIO multimedia driver to work on the old songs, and that's OK. Is that normal practice?

Sep 21, 2003, 05:03 PM	#8
njoha DriverHeaven Newbie Join Date: Jan 2003 Posts: 15 Rep Power: 0	I'm having the same problem with the latest official 34 package. I 've installed it too many times and even though windows don't hang at startup, I get the same message everytime, "error initialising your audio card etc. " I suppose the libs install themselves. I even tried copying all the files from system 32 to the system folder. any suggestions? ps. no antivirus running

Sep 22, 2003, 06:57 AM	#9
vikflash HardwareHeaven Lover Join Date: Dec 2002 Posts: 148 Rep Power: 0	HI I HAD A BUG LIKE THIS, SAME ERROR MESSAGE SINCE 3534A VERSION, 26 JUNE 03 I finally succeeded to install 3535 with a small utility called debugview, Max and Eugene advices. It seems like kx3534 and 3535 don't uninstall correctly previous versions and try to install latest drivers with 3533 libs that were not unistalled See my previous thread to see if you're concerned (it looks like) http://www.hardwareheaven.com/showthre...threadid=26569 Hope it helps you Vik

Sep 22, 2003, 07:00 AM	#10
vikflash HardwareHeaven Lover Join Date: Dec 2002 Posts: 148 Rep Power: 0	Hi Eugene May be you should look to this install problem I thougt it was a personal bug. But I look like not being the only one. Vik

Sep 22, 2003, 10:02 PM	#11
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	1. 352x versions are outdated. please uses 3534 or 3535 releases 2. if you install a -previous- version above a more recent one, you will 100% get an error you should uninstall the more recent version -completely- before installing any previous release (by clicking ' Remove' in the kX Setup window) /E