ToMaZK

First post and ofcourse i need to thank kX Project team for one topnotch work..

SPDIF recording..
I read kX project homepage guide but this didnt help me that much since i cannot find an actual direct SPID recording button..
I use an Audigy 2 Platinum connected to a DDTS-100 decoder..
kX pack 3538i
TS skin 100

I got my DCB receiver optical out hooked up on my optical in of my Live drive bay to record digital radio..

Heres what i came up :
Master:
Master: 100
Wave: 100
Synth, Reverb, Chorus: inf
no buttons activated..
Speaker mode : 5,1 direct path since optical out goes straigth into my DDTS-100
AC3-passthrough on SPDIF 1
SPDIF on 4800
SPDIF on SPDIF C or needs it to be Coaxical or I2Sx ??Coaxical it seems
P 16 V on SPDIF C too or needs it to be Coaxical or I2Sx too?? Coaxical too it seems otherwise it doesnt record..
But sstill does the button SPDIF bypass better on this setup ??
IN/OUT:
upper row i got SPDIF 0db (seems to be output)
lower row i got coaxical on 0db as there seems to be no optical there ..
RECORD:
Master : 100
Coaxical on on 0db

My I/O status is then :

SPDIF Inputs: [R-Rate Locked; S-Stream Locked; V-Valid Audio]
spdif A: unused
spdif B: 2001900 Freq: 48000 [R] [S] [V] || max. 20bits/SR unspec.
spdif C: unused or same as B
I2S Inputs: (0): 48000Hz [R] (1): 48000Hz [R] (2): 48000Hz [R]
SPDIF Outputs:
(0): 2109204 (1): 2109204 (2): 2109204 (24 bits / 48000 Hz)
SPDIF Extended status:
(0): 24bits/48000Hz (1): 24bits/48000Hz (2): 24bits/48000Hz
p16v: PB: (bypass) I2S Outbypass) SPDIF Outbypass)
Rec: (0): 0 [U] (1): 0 [U] (2): 0 [U] (3): 0 [U]

Does this setup as posted mean i am bypassing the DSP and acually properly recording an SPDIF where i can set my recorder to meet the 48000Hz criteria i want it to be????

Greets and thnQ in advance,

ToMaZK