KX problems

razeer · Dec 3, 2005, 06:46 AM

First of all I really apreciate KX developers work and others users who come with new solutions for creative audio cards.

This is first time use of KX drivers and am n00b.

I have two major problems.

1. I get an error every time when i try to select headphones : "Headphones preset are not curently supported"
2. I cannot find a solution to hear something using a pinnacle 110i pctv. ( In the past, with CRT drivers i had use TAD IN option"

Also when I try searching using tags on this forum i don't get any solution. sorry if the posts about this problems allready exist and sorry for my english.

Razeer

Maddogg6 · Dec 3, 2005, 08:09 AM

Dont select the Hph in surrounder...

With default DSP - plugging in headphone will be detected - if the option in KX is set ... this detection can also mute speaker outputs. It does work, but I have caused it to go 'out of sync' at times.

Many capture devices software need access to a windows compatable mixer interface - KX is not fully compatable in this. You can try other tv/capture software that *may* work (Like Media Portal).

I would NOT use TAD in - as its mono - ??
Use AUX or CD - but....

Anyway - to make sure the card *cant* work - a few things can be tried.

In KX Mixer
on AC97 page - Drop down of AC97 source should be what ever connector the TV card is connected to - If - its plugged into the TAD - set this drop down to TAD. Then - set the INPUT level of the same (TAD in your case) on this same page - and make sure its UN-MUTED

On 'INs & OUTs' page of KX - make sure the AC97 level is up and also NOT MUTED.

On 'RECORD' screen of KX - make sure AC97 level is the ONLY input selected to record (all other levels 0 or muted) - this sets recording level.

If it still records silence - then the SW wont work with KX.

razeer · Dec 3, 2005, 11:20 PM

Problem solved.

I use a TV plugin for winamp and i have a 5 -10 sec delay of sound after chanel changed. This delay trick me thinking is not the corect settings. I will try to solve that.

Thank you for sharing the infos.

Dec 3, 2005, 06:46 AM	#1
razeer HardwareHeaven Newbie Join Date: Mar 2005 Posts: 7 Rep Power: 0	KX problems First of all I really apreciate KX developers work and others users who come with new solutions for creative audio cards. This is first time use of KX drivers and am n00b. I have two major problems. 1. I get an error every time when i try to select headphones : "Headphones preset are not curently supported" 2. I cannot find a solution to hear something using a pinnacle 110i pctv. ( In the past, with CRT drivers i had use TAD IN option" Also when I try searching using tags on this forum i don't get any solution. sorry if the posts about this problems allready exist and sorry for my english. Razeer

Dec 3, 2005, 08:09 AM	#2
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	Dont select the Hph in surrounder... With default DSP - plugging in headphone will be detected - if the option in KX is set ... this detection can also mute speaker outputs. It does work, but I have caused it to go 'out of sync' at times. Many capture devices software need access to a windows compatable mixer interface - KX is not fully compatable in this. You can try other tv/capture software that may work (Like Media Portal). I would NOT use TAD in - as its mono - ?? Use AUX or CD - but.... Anyway - to make sure the card cant work - a few things can be tried. In KX Mixer on AC97 page - Drop down of AC97 source should be what ever connector the TV card is connected to - If - its plugged into the TAD - set this drop down to TAD. Then - set the INPUT level of the same (TAD in your case) on this same page - and make sure its UN-MUTED On 'INs & OUTs' page of KX - make sure the AC97 level is up and also NOT MUTED. On 'RECORD' screen of KX - make sure AC97 level is the ONLY input selected to record (all other levels 0 or muted) - this sets recording level. If it still records silence - then the SW wont work with KX.

Dec 3, 2005, 11:20 PM	Thread Starter #3
razeer HardwareHeaven Newbie Join Date: Mar 2005 Posts: 7 Rep Power: 0	Problem solved. I use a TV plugin for winamp and i have a 5 -10 sec delay of sound after chanel changed. This delay trick me thinking is not the corect settings. I will try to solve that. Thank you for sharing the infos.