moniter louder than recorded wave

ytrewq · Feb 19, 2006, 04:46 PM

im recording guitar into sonar and the monitered siginal is louder than the recorded siginal.i have tried to adjust it in the dsp do i need to adjust something in the mixer.im using audigy zs.im using line in 2 on the front and my 5.1 speakers are output on the back of the computer does anyone have a dsp setting for this.

Maddogg6 · Feb 19, 2006, 05:49 PM

are you using default DSP?

If using default DSP - then you have RECORD levels and if your using an AC97 input - you have relative levels on the AC97 page as well. ALSO theres a 'ANALOG RECORDING GAIN'

Are you using GuitarRig or Amplitube as a guiter fx processor to be recorded?

If your using guitar rig or Ampliyube - definitly you should look into customizing your DSP config.

You may want to look into using a DSP config that removes most of the mixer controls which, while is a little complicated to set up, eliminates many of the recording/monitor gain stage confusions.
thomasbarnes' Sonar and ProFX setup guide found here is pretty easy to follow.

http://www.hardwareheaven.com/showthre...582#post806582

In his signature is a link to his guide... and hey, to show your appreciation, have a listen to his music while you're reading..

Hope that helps.

ytrewq · Feb 20, 2006, 12:13 AM

his tutorial is really good that is how i got the dsp setup.i just have something set wrong i think because the playback is lower on my drums and other recorded tracks.i will check out his music i will also be sending something to kx because this is the first time im getting recording done without clicks on the audigy i like the extra effects on the kx to.the tubesound fattens up the sound.im using a damage control preamp to line in 2.

Feb 19, 2006, 04:46 PM	#1
ytrewq DriverHeaven Newbie Join Date: Feb 2006 Posts: 2 Rep Power: 0	moniter louder than recorded wave im recording guitar into sonar and the monitered siginal is louder than the recorded siginal.i have tried to adjust it in the dsp do i need to adjust something in the mixer.im using audigy zs.im using line in 2 on the front and my 5.1 speakers are output on the back of the computer does anyone have a dsp setting for this. Last edited by ytrewq; Feb 19, 2006 at 05:40 PM.

Feb 19, 2006, 05:49 PM	#2
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	are you using default DSP? If using default DSP - then you have RECORD levels and if your using an AC97 input - you have relative levels on the AC97 page as well. ALSO theres a 'ANALOG RECORDING GAIN' Are you using GuitarRig or Amplitube as a guiter fx processor to be recorded? If your using guitar rig or Ampliyube - definitly you should look into customizing your DSP config. You may want to look into using a DSP config that removes most of the mixer controls which, while is a little complicated to set up, eliminates many of the recording/monitor gain stage confusions. thomasbarnes' Sonar and ProFX setup guide found here is pretty easy to follow. http://www.hardwareheaven.com/showthre...582#post806582 In his signature is a link to his guide... and hey, to show your appreciation, have a listen to his music while you're reading.. Hope that helps.

Feb 20, 2006, 12:13 AM	Thread Starter #3
ytrewq DriverHeaven Newbie Join Date: Feb 2006 Posts: 2 Rep Power: 0	his tutorial is really good that is how i got the dsp setup.i just have something set wrong i think because the playback is lower on my drums and other recorded tracks.i will check out his music i will also be sending something to kx because this is the first time im getting recording done without clicks on the audigy i like the extra effects on the kx to.the tubesound fattens up the sound.im using a damage control preamp to line in 2.