processor has slowed

mitzripple · Mar 2, 2006, 06:28 AM

i need a site 2 up my processor, i done it once, but restored since, and don't remember where it was.i have a intel r celeron r d cpu 320, is there a driver 2 update this, thanks

Russ · Mar 2, 2006, 07:00 AM

Wrong forum, and you cannot upgrade your CPU via software. You must be thinking of something else.

Dyre Straits · Mar 2, 2006, 08:09 AM

Welcome to DH!

You maybe thinking of Intel Application Accelerator.

Try this site:

www.intel.com

PangingJr · Mar 2, 2006, 08:30 AM

here are some additional information to the Intel Application Accelerator software...

Performance Software - Intel Application Accelerator supports the following Intel chipsets:

Intel 810 ,810E, 810E2, 810L, 815, 815E, 815EP, 815G, 815EG, 815P, 820, 820E, 840, 845,
845E, 845G, 845GE, 845GL, 845GV, 845PE, 850, 850E, and 860 Chipsets.

Note-- Mobile chipset support was removed from Intel Application Accelerator version 2.3
Version 2.2.2 is the last version available that supports mobile chipsets.

Intel Celeron D Processor 320 -- Chipset...
Intel 915GV Express, 915G Express, 915P Express, 910GL Express, 865PE, 865P, 865GV, 865G, 848P, 845PE, 845GV, 845GE, 845G, 845E, and E7221 Chipsets.

anyway, What you mean "processor has slowed" ?

Do you mean that you have found your CPU clock speed reading lower than spec clock speed?
or Do you mean you find your computer runs slower than you expected?

"i need a site 2 up my processor"
or, you want to overclock your CPU, may be?

mitzripple · Mar 2, 2006, 12:10 PM

before i did a restore on my pc, i was transferring at 8000kbs and more, but now i am under 3000, example, i put dvds on my pc using a program called dvd shrink, the transfer has slowed tremendously and 2 burn data,music,anything, it takes round an hour, when it was burning in under 20 min.

Dyre Straits · Mar 2, 2006, 07:20 PM

Are you sure the CPU is setup properly in the BIOS?

Vikingod · Mar 2, 2006, 07:27 PM

Sounds like his chipset drivers are not up to date. Intel's website has the Drivers you need. You will also want to check drivers for any other components you have in your machine.

mitzripple · Mar 2, 2006, 07:55 PM

my bios says intel r celeron tm processor 2.40 ghz. level cache 256 integrated. cpu says bus speed 533 mhz. clockspeed 2.40 phoenix rom bios plus version 1.10 a03. My chipset says intel r 865g chipset family. In my device manager/computer, i have acpi uniprocessor. W/ processor identification utility, says f41 fc pga 2. Also in device manager/ processors, driver update, 2 pick the driver, i have intel processor and just processor, but they both r the same as in my speed. Am i telling u enough bout my pc, well i'm not done,lol!!! My pc is a dell diminsion 3000revision A03. In my system properties it says intel R celeron R cpu 2.40 ghz 2.39 ghz 512 mb of ram. The only way i knew it had slowed was using my dvd shrink 2 copy dvd 2 pc, it was going @ 8000kbs and climbing, now it's way under 3000. I done a complete restore recently after i had increased my speed, but didn't save the site where i got the increase in speed. And 2 burn w/ my record now, the burn time has greatly increased.I have been 2 dell and intel so many times, w/ no solution, if u can help, it would be greatly appreciated, thanks

niceguyrichy · Mar 2, 2006, 08:27 PM

are you basing the slowdown only on dvd shrink performance?

support for dvd shrink was withdrawn some time ago, so if you're trying to back-up newer dvd's with better copy protection I suppose there's always the chance that it's slowing up the rip/copy proccess.

personally I've had to stop using dvd shrink for most new films, it just doesn't cut it anymore

mitzripple · Mar 2, 2006, 08:58 PM

no i'm not, my record now burns, any burns, data, music, etc. have also slowed down, burns that were taking 7- 20 min 2 burn r now taking an hour or more.i use the shrink often, but i also have a decrypter that i have used 4 the newer dvds, it's on the dvd shrink site now. I haven't checked 2 c if download speed has changed yet, i download round 220kbs, i have dsl connection, i will check that now.

mitzripple · Mar 2, 2006, 09:13 PM

i did a download and my speed was a little 200kbs, but that's not unusual once in a while

PangingJr · Mar 3, 2006, 12:28 AM

Quote:

Originally Posted by mitzripple

The only way i knew it had slowed was using my dvd shrink 2 copy dvd 2 pc, it was going @ 8000kbs and climbing, now it's way under 3000.
I done a complete restore recently after i had increased my speed, but didn't save the site where i got the increase in speed.

ok, seems to me that there is nothing to worry about the hardware spec, nor the chipset drivers, or anything like that.
so forget about your computer hardware spec for now.

you want to know how to increase transfer rate of copying the contents of the CDs/DVDs' ? correct me.

my question is: Did the web site tell you to change the Windows registry settings ?

mitzripple · Mar 3, 2006, 03:11 AM

no it didn't, but after 2 horrible days of working with this, i just put my xp cd in and did what it calls an upgrade,lol, and i am encoding a dvd at over 8000 kbs. I don't know, reckon i should have done that first, but i just did a complete restore, duh on me.i am checking programs and hardware 4 any changes, so far so good, thanks 4 ur help, by the way i had a chat w/ dell support 4 a long time and they didn't know what 2 do cept upgrading my sonic recordnow, it didn't work, hmmm thanks again

PangingJr · Mar 3, 2006, 03:58 AM

good to hear that, and glad to know that the problem is now fixed.
also, please don't hesitate to ask us again on any problem you may have in future.

as for your problem with the roxio Sonic RecordNow you can direct the question to this forum Software / Tools -->Applications, Software and Tweaking.
people who has experience with the software may be able to see and help you.

misguided · Apr 18, 2006, 06:26 AM

mitzripple:

Just a thought....when you repaired Windows with your restore disc you probably re-enabled the DMA settings for your Optical drives and/or re-installed workable generic drivers for the same said drives.

Mar 2, 2006, 06:28 AM	#1
mitzripple DriverHeaven Newbie Join Date: Mar 2006 Posts: 7 Rep Power: 0	processor has slowed i need a site 2 up my processor, i done it once, but restored since, and don't remember where it was.i have a intel r celeron r d cpu 320, is there a driver 2 update this, thanks

Mar 2, 2006, 08:30 AM	#4
PangingJr Member Join Date: Mar 2003 Posts: 5,989 Rep Power: 71	here are some additional information to the Intel Application Accelerator software... Performance Software - Intel Application Accelerator supports the following Intel chipsets: Intel 810 ,810E, 810E2, 810L, 815, 815E, 815EP, 815G, 815EG, 815P, 820, 820E, 840, 845, 845E, 845G, 845GE, 845GL, 845GV, 845PE, 850, 850E, and 860 Chipsets. Note-- Mobile chipset support was removed from Intel Application Accelerator version 2.3 Version 2.2.2 is the last version available that supports mobile chipsets. Intel Celeron D Processor 320 -- Chipset... Intel 915GV Express, 915G Express, 915P Express, 910GL Express, 865PE, 865P, 865GV, 865G, 848P, 845PE, 845GV, 845GE, 845G, 845E, and E7221 Chipsets. anyway, What you mean "processor has slowed" ? Do you mean that you have found your CPU clock speed reading lower than spec clock speed? or Do you mean you find your computer runs slower than you expected? "i need a site 2 up my processor" or, you want to overclock your CPU, may be? Last edited by PangingJr; Mar 2, 2006 at 08:58 AM.

Mar 3, 2006, 03:58 AM	#14
PangingJr Member Join Date: Mar 2003 Posts: 5,989 Rep Power: 71	good to hear that, and glad to know that the problem is now fixed. also, please don't hesitate to ask us again on any problem you may have in future. as for your problem with the roxio Sonic RecordNow you can direct the question to this forum Software / Tools -->Applications, Software and Tweaking. people who has experience with the software may be able to see and help you. Last edited by PangingJr; Mar 3, 2006 at 05:20 AM.

Mar 2, 2006, 07:00 AM	#2
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,563 Rep Power: 62	Wrong forum, and you cannot upgrade your CPU via software. You must be thinking of something else.

Mar 2, 2006, 12:10 PM	Thread Starter #5
mitzripple DriverHeaven Newbie Join Date: Mar 2006 Posts: 7 Rep Power: 0	before i did a restore on my pc, i was transferring at 8000kbs and more, but now i am under 3000, example, i put dvds on my pc using a program called dvd shrink, the transfer has slowed tremendously and 2 burn data,music,anything, it takes round an hour, when it was burning in under 20 min.

Mar 2, 2006, 07:27 PM	#7
Vikingod Int'l Fish Liaison Join Date: Jul 2004 Location: By the light of lamp I sit and type... Posts: 16,197 Rep Power: 112 System Specs	Sounds like his chipset drivers are not up to date. Intel's website has the Drivers you need. You will also want to check drivers for any other components you have in your machine.

Mar 2, 2006, 07:55 PM	Thread Starter #8
mitzripple DriverHeaven Newbie Join Date: Mar 2006 Posts: 7 Rep Power: 0	my bios says intel r celeron tm processor 2.40 ghz. level cache 256 integrated. cpu says bus speed 533 mhz. clockspeed 2.40 phoenix rom bios plus version 1.10 a03. My chipset says intel r 865g chipset family. In my device manager/computer, i have acpi uniprocessor. W/ processor identification utility, says f41 fc pga 2. Also in device manager/ processors, driver update, 2 pick the driver, i have intel processor and just processor, but they both r the same as in my speed. Am i telling u enough bout my pc, well i'm not done,lol!!! My pc is a dell diminsion 3000revision A03. In my system properties it says intel R celeron R cpu 2.40 ghz 2.39 ghz 512 mb of ram. The only way i knew it had slowed was using my dvd shrink 2 copy dvd 2 pc, it was going @ 8000kbs and climbing, now it's way under 3000. I done a complete restore recently after i had increased my speed, but didn't save the site where i got the increase in speed. And 2 burn w/ my record now, the burn time has greatly increased.I have been 2 dell and intel so many times, w/ no solution, if u can help, it would be greatly appreciated, thanks

Mar 2, 2006, 08:58 PM	Thread Starter #10
mitzripple DriverHeaven Newbie Join Date: Mar 2006 Posts: 7 Rep Power: 0	no i'm not, my record now burns, any burns, data, music, etc. have also slowed down, burns that were taking 7- 20 min 2 burn r now taking an hour or more.i use the shrink often, but i also have a decrypter that i have used 4 the newer dvds, it's on the dvd shrink site now. I haven't checked 2 c if download speed has changed yet, i download round 220kbs, i have dsl connection, i will check that now.

Mar 2, 2006, 09:13 PM	Thread Starter #11
mitzripple DriverHeaven Newbie Join Date: Mar 2006 Posts: 7 Rep Power: 0	i did a download and my speed was a little 200kbs, but that's not unusual once in a while

Mar 3, 2006, 03:11 AM	Thread Starter #13
mitzripple DriverHeaven Newbie Join Date: Mar 2006 Posts: 7 Rep Power: 0	no it didn't, but after 2 horrible days of working with this, i just put my xp cd in and did what it calls an upgrade,lol, and i am encoding a dvd at over 8000 kbs. I don't know, reckon i should have done that first, but i just did a complete restore, duh on me.i am checking programs and hardware 4 any changes, so far so good, thanks 4 ur help, by the way i had a chat w/ dell support 4 a long time and they didn't know what 2 do cept upgrading my sonic recordnow, it didn't work, hmmm thanks again

Apr 18, 2006, 06:26 AM	#15
misguided DriverHeaven Junior Member Join Date: Feb 2006 Posts: 56 Rep Power: 0	mitzripple: Just a thought....when you repaired Windows with your restore disc you probably re-enabled the DMA settings for your Optical drives and/or re-installed workable generic drivers for the same said drives.