|
|||||||
| Hardware Discussion & Support Discuss your computer - its components or ANY hardware, past/current/future you want, or ask our forum experts if you have a general problem with your hardware. |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Senior Member
Join Date: Sep 2002
Posts: 1,095
Rep Power: 0 ![]() |
My processor overclocked itself?!?
I used to have my processor overclocked. It wasn't as stable as I wanted so I put it to the default clock speed. After a while, I have noticed that now in the System Properties it says 1.34GHz instead of 1.33GHz. WCPUID also shows that my processor is running at 1338.09MHz. My FSB started out at 133 and now it's at 133.81. This causes my processor to be overclocked.
|
|
|
|
|
|
#2 |
|
Freedom is a feature.
|
Well, I am not sure that it is good for PCI bus... especially if you have some senstive card.
__________________
-- Vedran |
|
|
|
|
|
#3 |
|
HardwareHeaven Extreme Member
|
no that sound right.. alot of ausu bards are that way to they like to try to cheat on benckmarks ex asus clock 134.98 then later after they lounch the board and it's been out for a whilethey put out a new bois flash that put it right back at 133 ... nice huh.... I am not joke they really do this
Check for a bios upgrade!!! |
|
|
|
|
|
#4 |
|
Unbiased.
Join Date: Jun 2002
Posts: 4,812
Rep Power: 0 ![]() |
420, that isn't anything to worry about - the timing chip isn't exact, the spacing between the different "ticks" of the system clock is very constant, but the amount of "ticks" per second varies, since it would only take a little little bit of error over 133,333,333 ticks to amount to a .5mhz deviation... its not something to be worried about in any case...
__________________
[img][/img] [color=White]Peace be with you, Joe.[/color] Driverheaven Staff Member (Supermoderator) |
|
|
|
|
|
#5 |
|
unplugged
|
At default speed my 1800xp runs at 1541mhz w/ a 133 fsb, not 1533 like it is "supposed" to- No big deal. I usually run it at 1633mhz w/ a 142mhz fsb anyway. I need to unlock it so I can run it at closer to 1.70 to 1.73ghz w/ a closer-to-stock fsb like I know it wants to be run. I need a rear-window-defrost kit and some super glue-
__________________
|
|
|
|
![]() |
| Thread Tools | |
|
|