disc in cdr drive

RitaM · Feb 25, 2007, 07:51 PM

hi I need some help,I put a softweare disc in the dvdr to load a icam ,the computor froze ,in the middle of instaing ,how do I retreve it,tried rebooting,no look

RoyBatty · Feb 25, 2007, 08:22 PM

You can't eject the disc even after you rebooted the computer? I have never seen this before... Try to turn the computer off (including the PSU) and then on again. The diode on the drive should blink a few times (meaning it is alive at least) after you turn on the computer. The drive should be completely reset after this and you should be able to eject the disc.

Report back if this doesn't help

cozumel · Feb 25, 2007, 08:54 PM

Is there a real small hole at the bottom of the front panel on the drive? If so, insert a tiny screwdriver, hairgrip or something into the hole to release the mechanism. (but don't force or could cause damage)

RoyBatty · Feb 25, 2007, 10:50 PM

Quote:

Originally Posted by cozumel

Is there a real small hole at the bottom of the front panel on the drive? If so, insert a tiny screwdriver, hairgrip or something into the hole to release the mechanism. (but don't force or could cause damage)

Yes, that's the final solution if everything else fails.

Feb 25, 2007, 07:51 PM	#1
RitaM DriverHeaven Newbie Join Date: Feb 2007 Location: Greece Posts: 3 Rep Power: 0	disc in cdr drive hi I need some help,I put a softweare disc in the dvdr to load a icam ,the computor froze ,in the middle of instaing ,how do I retreve it,tried rebooting,no look __________________ Discount Dental Plans - flowchart templates

Feb 25, 2007, 08:54 PM	#3
cozumel I'm dangerous but cute... Join Date: Apr 2006 Location: Under the waves... Posts: 3,577 Rep Power: 60 System Specs	Is there a real small hole at the bottom of the front panel on the drive? If so, insert a tiny screwdriver, hairgrip or something into the hole to release the mechanism. (but don't force or could cause damage) __________________ Don't worry about money - Be a beach bum! Scuba Rocks

Feb 25, 2007, 08:22 PM	#2
RoyBatty HardwareHeaven Senior Member Join Date: Jun 2006 Location: Czech Republic Posts: 1,941 Rep Power: 122 System Specs	You can't eject the disc even after you rebooted the computer? I have never seen this before... Try to turn the computer off (including the PSU) and then on again. The diode on the drive should blink a few times (meaning it is alive at least) after you turn on the computer. The drive should be completely reset after this and you should be able to eject the disc. Report back if this doesn't help