What temperature is your CPU?

Zardon · Mar 27, 2003, 07:27 PM

Id like to see the range of members CPU temps, at full load and idle, the clock speed you are running at and what temperatures you do not like to see, for example 60c+, 50c+

also please compare your results of various heatsinks and fans. and whether you dont mind a little extra noise for a few C less.

this makes for Interesting reading

Quote:

According to different sources an average service life of a relatively primitive IC is 50-75 years at 60Â°C and only 1000-1500 hrs at 125Â°C. We didn't conducted any large-scale tests of complex ICs (processors), but some semiexperimental estimations of their average service life are much more pessimistic than for ordinary ICs - not more than 1000-1500 hrs at 85-90Â°C.

shuki · Mar 27, 2003, 07:43 PM

xp2100 and kx7 with thermalright AX-7 and Thermaltake volcano 7 fan.
175x13 = 2275
idle temp - 35
full load 40

new nf7 reporting ~6c higher than kx7 on same exact setup so I'm assuming the sensor is off. Anyway running it now:
200x11.5 = 2300
idle is 44 (though I'm subtracting 6c from it which is more accurate so I'm figuring its at 38c idle)
full load - 49c (again -6c and at about 43/44 full load)

If not OCing at all, I'd let a cpu run 55c idle with a full load of not more than 60c
Ocing, no way I would let full load temp exceed 50c.

dipstick · Mar 27, 2003, 07:43 PM

I don't like to see anything near 50C...ever. I run a 2400+ at 2.47GHz @ 1.80v
With a SLK800/2500rpm/80mm/30cfm fan my temps are,
Idle: 39C
Load: 45C
With a Volcano 7+ at medium fan speeds the temps were,
Idle: 42C
Load: 49C

I would not mind trying a 3500rpm panaflo to see some lower temps though

Thx for the link, that was a good read

Dom · Mar 27, 2003, 07:53 PM

2200+ @ stock speeds

36Â°C - idle
44Â°C - full load

with Thermaltake Volcano 9 @ med fan speed

GOG · Mar 27, 2003, 08:01 PM

1800+ at stock speed, Zalman CNPS5500-CU at full RPM. Chieftech DA-series with seven fans, making my case sound like a jet

Idle = 52 degrees celsius.
Loaded = 57 deg. celsius.

My modo reads the actual core-temp with the internal sensor in the cpu, so It's pretty ok, I guess. Now the summer will be here soon and my computer is located on the second floor in our house, I will go up to around 60 deg on full load. My next major upgrade will be some nice watercooled peltier blocks to both the cpu and the vpu (gpu to you nVidia people

). I'm also going to find a nice clockable 1700+ t-bred, then it's cloxxor-time

I wouldn't care too much before it hits 65 deg

~~shai~~ · Mar 27, 2003, 08:18 PM

Quote:

Originally posted by shuki
xp2100 and kx7 with thermalright AX-7 and Thermaltake volcano 7 fan.
175x13 = 2275
idle temp - 35
full load 40

new nf7 reporting ~6c higher than kx7 on same exact setup so I'm assuming the sensor is off. Anyway running it now:
200x11.5 = 2300
idle is 44 (though I'm subtracting 6c from it which is more accurate so I'm figuring its at 38c idle)
full load - 49c (again -6c and at about 43/44 full load)

If not OCing at all, I'd let a cpu run 55c idle with a full load of not more than 60c
Ocing, no way I would let full load temp exceed 50c.

hoy shuki get a sk7 at simpletech.co.il for 155 sheks or so
its as good as the slk 800

The_Neon_Cowboy · Mar 27, 2003, 08:59 PM

I'll keeps you posted (BUSY UPGRADEING) but currently

600mhz adm duron 34C (CHEAPFAN)
1GHZ amd duron 38C (CHEAPFAN)
2500+ BARTON 47C (RETAILFAN)(ABOUT TO CHANGE GETTING SLK-800A FRIDAY)

EDIT: got my new Heatsink

but my fans etc... I am still waiting on

brc64 · Mar 27, 2003, 09:39 PM

Every processor I've had in this motherboard has always run at the same temp full load

Celeron 566 - 50 C
Celeron 566@700 - 50 C
Celeron 733 - 50 C
P3 1GHz - 50 C

I think maybe something's wrong with the temp sensor

- Me

DriveEuro · Mar 28, 2003, 12:53 AM

Quote:

Originally posted by shuki
new nf7 reporting ~6c higher than kx7 on same exact setup so I'm assuming the sensor is off.

Yeah, the 1.2 temps are about 7C higher than the older NF7-Ss and the NF7 (non S) .

Anyways I am running XP2100 at 2200mhz. SLK-800 with ThermalTake Smart Fan 2 ... Full load: 42C ...... Idle? Dunno, I am always folding. Never checked to see. My temps are high cuz I pulled up the temp diode so it actually touches the back of the CPU.

Robert McClelland · Mar 28, 2003, 05:55 AM

lol mind cold Processor at 34C or 93F System Fan1 31C or 88F

system fan1 been running at 3925 RPM

fully load at 40C or 110F something like that. I used the intel active monitor. I have extra video card cooler for my 8500LE over clock at 279@279mhz getting scores like 9866 when fully defrag at one time.

This Gateway system very cold very please with it. I belive Plasic cases like what HP does make system over heats to much thats why I switch to Gateway. They used Metal casen. So far been two months and loving it.

Vampyromaniac · Mar 29, 2003, 04:10 AM

AthlonXP 1800-Palo
Arctic Silver 3
Alpha PAL 8045
Mechatronics 80x25mm fan (4200 rpm, 53 CFM, 39 dB)
Dell Dimension XPS T600r case

w/ 1 weak fan

(no temp sensor . . . reading CPU diode)

idle temp: 44ÂºC
full load: 50ÂºC
clock: 1527MHz (11.5x132.77

)

I would not want to see double-nickels (55

)
As for more noise for lower temps . . . noise is fine now, I'd have to hear just how much more noise for the lower temps

WyreTheWolf · Mar 29, 2003, 11:35 AM

AMD Athlon XP 1600+ AGOIA Palomino built 42nd week of 2002
2.05 volts VCore on a voltage modified MSI KT3 Ultra2 - R
Stock 1400MHz OCed to 1901MHz (181MHz FSB)
Thermaltake volcano 7+ (bottom of the HSF was milled perfectly flat, then polished)
Fan speed set to medium
Using TherMagic Thermal Interface Material.

AMBIENT: 27*C
|||||||||||||||||||||||||||

IDLE: 33*C
|||||||||||||||||||||||||||||||||

LOAD: 41*C
|||||||||||||||||||||||||||||||||||||||||

__________________________________________________ ________________

Hope that is of some help

~~shai~~ · Mar 29, 2003, 01:39 PM

very nice OC there wolf what does it overclock to on high fan speed

dipstick · Mar 29, 2003, 04:53 PM

Wow, those are some insane numbers for a 7+. I'm totally amazed Wolf

~~shai~~ · Mar 29, 2003, 05:22 PM

the polishing of the hsf proly gave him 2c less

~~Asuka~~ · Mar 29, 2003, 05:47 PM

I got a Athlon XP 2000+ (Palomino core) which has 50Â° average temp. The Palominos tend to have such temperatures since they only have a .18 core.
edit: That's Celsius, not that freaky Fahrenheit

~~shai~~ · Mar 29, 2003, 06:08 PM

they do not mine has a max temp of 40c

WyreTheWolf · Mar 30, 2003, 08:52 AM

Quote:

Originally posted by shai
the polishing of the hsf proly gave him 2c less

It made 4*C difference, the TherMagic TIM made another 2*-3*C difference... reshaping the top of the fins made another 1*C difference.

By reshaping the fins to direct air towards the center of the HS made a good difference...

running the fan on high only made about about 1*C difference... but the noise was too much... and the 1*C difference didnt help overclock any further... so, I would rather not deal with the noise.

Overall I am very happy with this overclock, BUT... I am thinking about selling this AGOIA processor, and going to a Tbred B, 1700, or 1800... and try for another 400 to 500 MHz overclock...

The nice thing about going to a TBred as that it will run even cooler... and with the ability of throwing large amounts of voltage to the core... I imagine that with a good core... I could get a 600MHz overclock... maybe more

Also, I am looking into the possability of using a very powerful (around 140 - 180 watt) peltier.

~~shai~~ · Mar 30, 2003, 11:32 AM

i wouldnt if i were you
take the time to upgrade other comps

tigerarmyAFI · Mar 30, 2003, 01:22 PM

AthlonXP Palomino @ 1833MHz w/ coolermaster X-dream (speed adjustable 80mm fan @ 3750rpm)

case - 32deg C
idle 38-40deg C
load 45-47deg C (its getting warmer now.....)

WyreTheWolf · Mar 31, 2003, 06:29 AM

Quote:

Originally posted by shai
i wouldnt if i were you
take the time to upgrade other comps

Other computers dont need an upgrade... and besides, before I upgrade the CPU, I will be upgrading the GPU.

-={420}=- · Mar 31, 2003, 06:35 AM

Since we're talking about CPU temps, does anyone know a good program for telling u the cpu temp besides mbm5 and coolmon?

DriveEuro · Mar 31, 2003, 06:37 AM

Speedfan.

~~Sourcer_2002~~ · Mar 31, 2003, 07:16 AM

Im runnging a 1700 ( 1.47 ghz)+ at 2000+ ( 1.61 ghz ) speeds I would OC more but i get no boot at 150 fsb im running at 147fsb stock voltages. I have a Cheiftec Matrix Gloden Green case ( minus the window i have one i did myself) with 4 80's. I dont like to break over 40C to me thats hot im not sure what really is hot for a AMD though. The heatsink on this is a beast. I was running a thermaltake on it.....i went to a LAN and about after 5 min after setting up had my machine going i smelled somethig hot. I though it was my friends comp cuz my was working great before i left. Turns out my my fan died on my cooler. I was saved by a buddy that had a stock AMD 2600 cooler. I got used to it and ran really extremlly quite. Well i was buying cathodes and stuff from xoxide.com and was like well buy a new heatsink so i could the stock one back. This thing is freaking heavy ...it has a copper core and what not....when i slaped that on there my PC sounded like a freaking Jet heres the cooler. Im slowly getting used to it.

If anyone knows of a way to oc this higher or know how to unclock the proc let me know. Also i feel that this is a hell of temp 33C when a friend of mine is watercooled and OC at 28C.

stock 1700+ ( 1.47 ghz ) @ 2000+ ( 1.61 ghz )
33C at idle
39C at load
2 80MM Tri-blue led fans in rear ( outtake )
1 80MM Tri-Blue led fan in front ( intake )
1 80 in front cooling drives

~~Sourcer_2002~~ · Mar 31, 2003, 07:19 AM

My case or chipset sensor reads 23C

peterosesbookie · Mar 31, 2003, 07:22 AM

Here is mine

Both AMD MP 1900+'s

CPU1: Volt - 1.712 Temp - 42

CPU2: Volt - 1.712 Temp - 36

After 7 hours of encoding divx movies

CPU1: Volt - 1.712 Temp - 46

CPU2: Volt - 1.712 Temp - 38

Cooling Thermaltake Volcano 6CU+ 7200 RPMs

Fans in case

3 Rear Includes powersupply fan
1 front
1 side

later

pete

-={420}=- · Mar 31, 2003, 12:41 PM

Quote:

Originally posted by DriveEuro
Speedfan.

Thanks, that's exactly what I was looking for.

~~Sourcer_2002~~ · Mar 31, 2003, 04:06 PM

i like speedfan but it wont control fans anyone know other another program that would allow you to?

merry · Mar 31, 2003, 04:10 PM

Not all mobos/fans accept speed control. Mine don't, still if I set speed to zero, the cooler fan stops (audibly

). However, I can't control it's speed besides on/off.

~~Sourcer_2002~~ · Mar 31, 2003, 04:32 PM

Ya im lookin to bulid me a rehobus to control all my fans.

Mar 27, 2003, 07:43 PM	#3
dipstick HardwareHeaven Extreme Member Join Date: May 2002 Location: USA Posts: 3,609 Rep Power: 70 System Specs	I don't like to see anything near 50C...ever. I run a 2400+ at 2.47GHz @ 1.80v With a SLK800/2500rpm/80mm/30cfm fan my temps are, Idle: 39C Load: 45C With a Volcano 7+ at medium fan speeds the temps were, Idle: 42C Load: 49C I would not mind trying a 3500rpm panaflo to see some lower temps though Thx for the link, that was a good read Last edited by dipstick; Mar 27, 2003 at 07:49 PM.

Mar 27, 2003, 08:01 PM	#5
GOG Please answer the voices in my head Join Date: Jun 2002 Location: Sweden Posts: 308 Rep Power: 0	1800+ at stock speed, Zalman CNPS5500-CU at full RPM. Chieftech DA-series with seven fans, making my case sound like a jet Idle = 52 degrees celsius. Loaded = 57 deg. celsius. My modo reads the actual core-temp with the internal sensor in the cpu, so It's pretty ok, I guess. Now the summer will be here soon and my computer is located on the second floor in our house, I will go up to around 60 deg on full load. My next major upgrade will be some nice watercooled peltier blocks to both the cpu and the vpu (gpu to you nVidia people). I'm also going to find a nice clockable 1700+ t-bred, then it's cloxxor-time I wouldn't care too much before it hits 65 deg

Mar 27, 2003, 08:59 PM	#7
The_Neon_Cowboy HardwareHeaven Extreme Member Join Date: Dec 2002 Location: U.S.A. Posts: 16,009 Rep Power: 90 System Specs	I'll keeps you posted (BUSY UPGRADEING) but currently 600mhz adm duron 34C (CHEAPFAN) 1GHZ amd duron 38C (CHEAPFAN) 2500+ BARTON 47C (RETAILFAN)(ABOUT TO CHANGE GETTING SLK-800A FRIDAY) EDIT: got my new Heatsink but my fans etc... I am still waiting on __________________ Last edited by The_Neon_Cowboy; Mar 31, 2003 at 12:50 PM.

Mar 28, 2003, 05:55 AM	#10
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,249 Rep Power: 193 System Specs	lol mind cold Processor at 34C or 93F System Fan1 31C or 88F system fan1 been running at 3925 RPM fully load at 40C or 110F something like that. I used the intel active monitor. I have extra video card cooler for my 8500LE over clock at 279@279mhz getting scores like 9866 when fully defrag at one time. This Gateway system very cold very please with it. I belive Plasic cases like what HP does make system over heats to much thats why I switch to Gateway. They used Metal casen. So far been two months and loving it. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://valid.canardpc.com/show_oc.php?id=2242746

Mar 29, 2003, 04:10 AM	#11
Vampyromaniac confutatis maledictis Join Date: May 2002 Location: somewhere dark Posts: 5,974 Rep Power: 74 System Specs	AthlonXP 1800-Palo Arctic Silver 3 Alpha PAL 8045 Mechatronics 80x25mm fan (4200 rpm, 53 CFM, 39 dB) Dell Dimension XPS T600r case w/ 1 weak fan (no temp sensor . . . reading CPU diode) idle temp: 44ÂºC full load: 50ÂºC clock: 1527MHz (11.5x132.77 ) I would not want to see double-nickels (55 ) As for more noise for lower temps . . . noise is fine now, I'd have to hear just how much more noise for the lower temps __________________ *Digitalis 3.3* Athlon 64 3000 // ASUS K8V SE Deluxe // 1024MB PC3200 (2-2-2-10 1T) ATI All-In-Wonder 9700 Pro // 20" Dell 2005FPW (DVI) M-Audio Revo 7.1 + Philips Acoustic Edge // Klipsch ProMedia 2.1 320/16 Western Digital WD3200KS + 120/8 Seagate 7200.7 NEC ND-3550A 16x DVD±RW + Lite-On 52x24x CD-RW Antec Sonata case // 480W Antec TruePower personal bests \|\| Aq'3: 46796 \| 3D'01: 20461 \| 3D'03: 6336 \| 3D'05: 2677 \| PC'04: 4605 \| PC'02: 7691,9092,1250

Mar 27, 2003, 07:43 PM	#2
shuki DriverHeaven Senior Member Join Date: May 2002 Location: in the hidden place Posts: 1,975 Rep Power: 0	xp2100 and kx7 with thermalright AX-7 and Thermaltake volcano 7 fan. 175x13 = 2275 idle temp - 35 full load 40 new nf7 reporting ~6c higher than kx7 on same exact setup so I'm assuming the sensor is off. Anyway running it now: 200x11.5 = 2300 idle is 44 (though I'm subtracting 6c from it which is more accurate so I'm figuring its at 38c idle) full load - 49c (again -6c and at about 43/44 full load) If not OCing at all, I'd let a cpu run 55c idle with a full load of not more than 60c Ocing, no way I would let full load temp exceed 50c.

Mar 27, 2003, 07:53 PM	#4
Dom DriverHeaven Extreme Member Join Date: Jun 2002 Posts: 12,940 Rep Power: 0	2200+ @ stock speeds 36Â°C - idle 44Â°C - full load with Thermaltake Volcano 9 @ med fan speed

Mar 27, 2003, 09:39 PM	#8
brc64 Zeeky H. Bomb Join Date: May 2002 Location: Evansville, IN Posts: 826 Rep Power: 0	Every processor I've had in this motherboard has always run at the same temp full load Celeron 566 - 50 C Celeron 566@700 - 50 C Celeron 733 - 50 C P3 1GHz - 50 C I think maybe something's wrong with the temp sensor - Me

Mar 29, 2003, 11:35 AM	#12
WyreTheWolf Wolfish Bastard Join Date: May 2002 Location: Cave; Ozark Mountains Posts: 2,111 Rep Power: 0	AMD Athlon XP 1600+ AGOIA Palomino built 42nd week of 2002 2.05 volts VCore on a voltage modified MSI KT3 Ultra2 - R Stock 1400MHz OCed to 1901MHz (181MHz FSB) Thermaltake volcano 7+ (bottom of the HSF was milled perfectly flat, then polished) Fan speed set to medium Using TherMagic Thermal Interface Material. AMBIENT: 27C \|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\| IDLE: 33C \|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\| LOAD: 41*C \|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\| __________________________________________________ ________________ Hope that is of some help

Mar 29, 2003, 01:39 PM	#13
~~shai~~ Banned Join Date: Jul 2002 Posts: 613 Rep Power: 0	very nice OC there wolf what does it overclock to on high fan speed

Mar 29, 2003, 04:53 PM	#14
dipstick HardwareHeaven Extreme Member Join Date: May 2002 Location: USA Posts: 3,609 Rep Power: 70 System Specs	Wow, those are some insane numbers for a 7+. I'm totally amazed Wolf

Mar 29, 2003, 05:22 PM	#15
~~shai~~ Banned Join Date: Jul 2002 Posts: 613 Rep Power: 0	the polishing of the hsf proly gave him 2c less

Mar 29, 2003, 05:47 PM	#16
~~Asuka~~ BANNED Join Date: Sep 2002 Location: Germany Posts: 579 Rep Power: 0	I got a Athlon XP 2000+ (Palomino core) which has 50Â° average temp. The Palominos tend to have such temperatures since they only have a .18 core. edit: That's Celsius, not that freaky Fahrenheit

Mar 29, 2003, 06:08 PM	#17
~~shai~~ Banned Join Date: Jul 2002 Posts: 613 Rep Power: 0	they do not mine has a max temp of 40c

Mar 30, 2003, 11:32 AM	#19
~~shai~~ Banned Join Date: Jul 2002 Posts: 613 Rep Power: 0	i wouldnt if i were you take the time to upgrade other comps

Mar 31, 2003, 06:37 AM	#23
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	Speedfan. __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024

Mar 30, 2003, 01:22 PM	#20
tigerarmyAFI DriverHeaven Lover Join Date: Oct 2002 Location: England Posts: 111 Rep Power: 0	AthlonXP Palomino @ 1833MHz w/ coolermaster X-dream (speed adjustable 80mm fan @ 3750rpm) case - 32deg C idle 38-40deg C load 45-47deg C (its getting warmer now.....) __________________ AMD AthlonXP 1800+ ThoroughBred B JIUHB @ 2137MHz Geforce4 Ti 4200 128Mb @ 310/600 (ASUS V8420) ABIT KX-7 333 v1.1 512Mb Micron PC2700 DDR Creative Live! 5.1 Aircooled (45c Full load)

Mar 31, 2003, 06:35 AM	#22
-={420}=- DriverHeaven Senior Member Join Date: Sep 2002 Posts: 1,095 Rep Power: 0	Since we're talking about CPU temps, does anyone know a good program for telling u the cpu temp besides mbm5 and coolmon? __________________ [COLOR=red]My eBay Auctions[/COLOR]

Mar 31, 2003, 07:16 AM	#24
~~Sourcer_2002~~ BANNED Join Date: Jul 2002 Location: Indiana , USA Posts: 2,677 Rep Power: 0	Im runnging a 1700 ( 1.47 ghz)+ at 2000+ ( 1.61 ghz ) speeds I would OC more but i get no boot at 150 fsb im running at 147fsb stock voltages. I have a Cheiftec Matrix Gloden Green case ( minus the window i have one i did myself) with 4 80's. I dont like to break over 40C to me thats hot im not sure what really is hot for a AMD though. The heatsink on this is a beast. I was running a thermaltake on it.....i went to a LAN and about after 5 min after setting up had my machine going i smelled somethig hot. I though it was my friends comp cuz my was working great before i left. Turns out my my fan died on my cooler. I was saved by a buddy that had a stock AMD 2600 cooler. I got used to it and ran really extremlly quite. Well i was buying cathodes and stuff from xoxide.com and was like well buy a new heatsink so i could the stock one back. This thing is freaking heavy ...it has a copper core and what not....when i slaped that on there my PC sounded like a freaking Jet heres the cooler. Im slowly getting used to it. If anyone knows of a way to oc this higher or know how to unclock the proc let me know. Also i feel that this is a hell of temp 33C when a friend of mine is watercooled and OC at 28C. stock 1700+ ( 1.47 ghz ) @ 2000+ ( 1.61 ghz ) 33C at idle 39C at load 2 80MM Tri-blue led fans in rear ( outtake ) 1 80MM Tri-Blue led fan in front ( intake ) 1 80 in front cooling drives

Mar 31, 2003, 07:19 AM	#25
~~Sourcer_2002~~ BANNED Join Date: Jul 2002 Location: Indiana , USA Posts: 2,677 Rep Power: 0	My case or chipset sensor reads 23C

Mar 31, 2003, 07:22 AM	#26
peterosesbookie HardwareHeaven Senior Member Join Date: May 2002 Location: OHIO Posts: 556 Rep Power: 0	Dual AMD Thunder K7 Temps and voltages Here is mine Both AMD MP 1900+'s CPU1: Volt - 1.712 Temp - 42 CPU2: Volt - 1.712 Temp - 36 After 7 hours of encoding divx movies CPU1: Volt - 1.712 Temp - 46 CPU2: Volt - 1.712 Temp - 38 Cooling Thermaltake Volcano 6CU+ 7200 RPMs Fans in case 3 Rear Includes powersupply fan 1 front 1 side later pete __________________ A Cat almost always blinks when hit in the head with a ball peen hammer!

Mar 31, 2003, 04:06 PM	#28
~~Sourcer_2002~~ BANNED Join Date: Jul 2002 Location: Indiana , USA Posts: 2,677 Rep Power: 0	i like speedfan but it wont control fans anyone know other another program that would allow you to?

Mar 31, 2003, 04:10 PM	#29
merry gargouille Join Date: Jun 2002 Location: sector ZZ9 Plural Z Alpha Posts: 962 Rep Power: 0	Not all mobos/fans accept speed control. Mine don't, still if I set speed to zero, the cooler fan stops (audibly). However, I can't control it's speed besides on/off. __________________ There is a war between the ones who say there is a war and the ones who say there isn't. ~~Leonard Cohen

Mar 31, 2003, 04:32 PM	#30
~~Sourcer_2002~~ BANNED Join Date: Jul 2002 Location: Indiana , USA Posts: 2,677 Rep Power: 0	Ya im lookin to bulid me a rehobus to control all my fans.