need a new mouse.....

**kris23** · May 15, 2009, 11:36 PM

hey guys.... well apparently my razer copperhead which is now 3 years old is now finally dying off... resets itself

so now im wondering what is a good mouse for left handers? i want to give Razer a break

OldBuzzard · May 15, 2009, 11:52 PM

http://www.logitech.com/index.cfm/mi...s/168&cl=us,en
http://www.newegg.com/Product/Produc...82E16826104056

Install the setpoint drivers, and then a free applications call UberOptions.
uberOptions Wiki | Main / uberOptions

Uberoptions lets you make profiles for any application you want, and will automatically load them when you use that application. It also allows you to program buttons that Setpoint won't.

**kris23** · May 16, 2009, 12:06 AM

if only that was a wired high DPI gaming mouse id be happy....

only common ambidextrous mice are Razers....

Zelig · May 16, 2009, 01:22 AM

The Microsoft Sidewinder X3 is a 2000 dpi ambidextrous wired laser mouse.

It's just been released, so you may have trouble finding it...

CDsDontBurn · May 16, 2009, 02:35 AM

logitech g5 FTW

oh, and AFAIK, logitech doesn't make high end ambidextrious gaming mice.

**kris23** · May 16, 2009, 03:22 AM

i feel so forgotten.....

im forcing use of my right hand.... it hurts... so very bad

CDsDontBurn · May 16, 2009, 03:48 AM

why does your right hand hurt? did you break it or something? or are you left handed and use the mouse on the left side of your KB?

**kris23** · May 16, 2009, 04:16 AM

it burns from disuse.... i get pwned in everything....

Zelig · May 16, 2009, 04:19 AM

Quote:

Originally Posted by CDsDontBurn

or are you left handed and use the mouse on the left side of your KB?

I'm right handed, and use the mouse on the left side of the keyboard.

That way, I have the typing keys in the middle, with the mouse and numpad on either side.

If I have the mouse on the right hand side I have the numpad in the middle, which I use with my right hand anyway.

**kris23** · May 16, 2009, 04:36 AM

well.... as my replacement mouse is behaving the same way.... i can say that my motherboard is cooked then.....

the copperhead works perfectly fine on my laptop....

Zardon · May 16, 2009, 12:12 PM

what you need to do is get yourself a powerball or a guitarists hand strengthener mate. I know it sounds dramatic, but the sooner you get that arm and hand/wrist stronger the better your life will be.

I am actually ambidextrous which I guess is rare, I can use the mouse with either hand and I write with both as well. I tend to write left handed however and use the mouse right handed when given the option (no, not at the same time

).

I play the guitar the standard right handed way however as restringing things when I was a kid was never something I wanted to deal with.

it is unfortunate that left handers are punished so much with hardware and other things in life, but my suggestion is to start getting that right side of your body more usable, will make your life much easier. Then I can recommend the Steelseries Ikari Laser mouse

Mac Daddy · May 16, 2009, 12:44 PM

Z is right on strengthening that hand I am right handed but because of years of guitar playing my left hand is far stronger than my right. I was going to suggest the same mouse but saw the left handed issue mentioned. The Ikari fits like a glove but just in the right hand

**kris23** · May 16, 2009, 05:28 PM

yea.... that seems to be what i have to do.... so many awesome high quality products out there for right handers its crazy... i want to try out steelseries stuff

**kris23** · May 16, 2009, 06:52 PM

well ive been using my mouse in my right hand for a bit now and im actualy getting pretty used to it... got a few shots in CS

Mac Daddy · May 16, 2009, 07:02 PM

Well work with it Kris and see how it goes man

EDIT: The comfort of the Ikari Laser alone might help

DJ BIG T · May 16, 2009, 07:54 PM

Quote:

Originally Posted by kris23

if only that was a wired high DPI gaming mouse id be happy....

only common ambidextrous mice are Razers....

kris there wireless are good for gaming i use to use there logic 1000 for games and never had cutting out with it...

**kris23** · Jun 9, 2009, 01:55 AM

well, i finally got the SteelSeries Ikari Laser and SX Aluminum pad

its amazing, cant game with it yet as i have finals. this thing is so awesome, the glide is the best ive ever felt....

$110 bucks, this thing is quite the investment

Mac Daddy · Jun 9, 2009, 03:12 AM

Sweet Kris good luck on the Trig tomorrow Bro and hope you get to enjoy the new toys soon

**kris23** · Jun 10, 2009, 12:24 AM

took my trig test.... hopefully it comes out good... will wait for the report card again lol

2 more days before i can REALLY let this ikari loose

Mac Daddy · Jun 10, 2009, 02:27 AM

Kris I have faith on the Trig Bro and enjoy the Ikari when you get there mate

**kris23** · Jun 12, 2009, 01:38 AM

now that i finally got to play some games with this ikari laser..... i can say that it still amazes... really an excellent product. now to see if it withstands the test of time...

Mac Daddy · Jun 12, 2009, 01:46 AM

Has here so far Bro have fun with it

May 15, 2009, 11:36 PM	#1
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	need a new mouse..... hey guys.... well apparently my razer copperhead which is now 3 years old is now finally dying off... resets itself so now im wondering what is a good mouse for left handers? i want to give Razer a break __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

May 15, 2009, 11:52 PM	#2
OldBuzzard DH's oldest Geek Join Date: May 2003 Location: Oberlin, OH Posts: 2,781 Rep Power: 142 System Specs	Re: need a new mouse..... http://www.logitech.com/index.cfm/mi...s/168&cl=us,en http://www.newegg.com/Product/Produc...82E16826104056 Install the setpoint drivers, and then a free applications call UberOptions. uberOptions Wiki \| Main / uberOptions Uberoptions lets you make profiles for any application you want, and will automatically load them when you use that application. It also allows you to program buttons that Setpoint won't. __________________ When looking for a reason as to why things go wrong, never rule out sheer STUPIDITY

May 16, 2009, 12:06 AM	Thread Starter #3
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... if only that was a wired high DPI gaming mouse id be happy.... only common ambidextrous mice are Razers.... __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

May 16, 2009, 01:22 AM	#4
Zelig HardwareHeaven Extreme Member Join Date: Jun 2003 Location: Canada Posts: 3,187 Rep Power: 71 System Specs	Re: need a new mouse..... The Microsoft Sidewinder X3 is a 2000 dpi ambidextrous wired laser mouse. It's just been released, so you may have trouble finding it... __________________ --

May 16, 2009, 02:35 AM	#5
CDsDontBurn Lurking DriverHeaven Join Date: May 2003 Location: Southern California Posts: 22,779 Rep Power: 235 System Specs	Re: need a new mouse..... logitech g5 FTW oh, and AFAIK, logitech doesn't make high end ambidextrious gaming mice. __________________ Her First Day \| A year later

May 16, 2009, 03:22 AM	Thread Starter #6
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... i feel so forgotten..... im forcing use of my right hand.... it hurts... so very bad __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

May 16, 2009, 03:48 AM	#7
CDsDontBurn Lurking DriverHeaven Join Date: May 2003 Location: Southern California Posts: 22,779 Rep Power: 235 System Specs	Re: need a new mouse..... why does your right hand hurt? did you break it or something? or are you left handed and use the mouse on the left side of your KB? __________________ Her First Day \| A year later

May 16, 2009, 04:16 AM	Thread Starter #8
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... it burns from disuse.... i get pwned in everything.... __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

May 16, 2009, 04:36 AM	Thread Starter #10
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... well.... as my replacement mouse is behaving the same way.... i can say that my motherboard is cooked then..... the copperhead works perfectly fine on my laptop.... __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

May 16, 2009, 12:12 PM	#11
Zardon DriverHeaven Founder Join Date: May 2002 Posts: 32,480 Rep Power: 179	Re: need a new mouse..... what you need to do is get yourself a powerball or a guitarists hand strengthener mate. I know it sounds dramatic, but the sooner you get that arm and hand/wrist stronger the better your life will be. I am actually ambidextrous which I guess is rare, I can use the mouse with either hand and I write with both as well. I tend to write left handed however and use the mouse right handed when given the option (no, not at the same time ). I play the guitar the standard right handed way however as restringing things when I was a kid was never something I wanted to deal with. it is unfortunate that left handers are punished so much with hardware and other things in life, but my suggestion is to start getting that right side of your body more usable, will make your life much easier. Then I can recommend the Steelseries Ikari Laser mouse

May 16, 2009, 12:44 PM	#12
Mac Daddy DriverHeaven Extreme Member Join Date: Jul 2002 Location: Ontario, Canada Posts: 7,950 Rep Power: 79 System Specs	Re: need a new mouse..... Z is right on strengthening that hand I am right handed but because of years of guitar playing my left hand is far stronger than my right. I was going to suggest the same mouse but saw the left handed issue mentioned. The Ikari fits like a glove but just in the right hand __________________ "My mom said the only reason men are alive is for lawn care and vehicle maintenance." - Tim Allen

May 16, 2009, 05:28 PM	Thread Starter #13
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... yea.... that seems to be what i have to do.... so many awesome high quality products out there for right handers its crazy... i want to try out steelseries stuff __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

May 16, 2009, 06:52 PM	Thread Starter #14
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... well ive been using my mouse in my right hand for a bit now and im actualy getting pretty used to it... got a few shots in CS __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

May 16, 2009, 07:02 PM	#15
Mac Daddy DriverHeaven Extreme Member Join Date: Jul 2002 Location: Ontario, Canada Posts: 7,950 Rep Power: 79 System Specs	Re: need a new mouse..... Well work with it Kris and see how it goes man EDIT: The comfort of the Ikari Laser alone might help __________________ "My mom said the only reason men are alive is for lawn care and vehicle maintenance." - Tim Allen

Jun 9, 2009, 01:55 AM	Thread Starter #17
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... well, i finally got the SteelSeries Ikari Laser and SX Aluminum pad its amazing, cant game with it yet as i have finals. this thing is so awesome, the glide is the best ive ever felt.... $110 bucks, this thing is quite the investment __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

Jun 9, 2009, 03:12 AM	#18
Mac Daddy DriverHeaven Extreme Member Join Date: Jul 2002 Location: Ontario, Canada Posts: 7,950 Rep Power: 79 System Specs	Re: need a new mouse..... Sweet Kris good luck on the Trig tomorrow Bro and hope you get to enjoy the new toys soon __________________ "My mom said the only reason men are alive is for lawn care and vehicle maintenance." - Tim Allen

Jun 10, 2009, 12:24 AM	Thread Starter #19
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... took my trig test.... hopefully it comes out good... will wait for the report card again lol 2 more days before i can REALLY let this ikari loose __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

Jun 10, 2009, 02:27 AM	#20
Mac Daddy DriverHeaven Extreme Member Join Date: Jul 2002 Location: Ontario, Canada Posts: 7,950 Rep Power: 79 System Specs	Re: need a new mouse..... Kris I have faith on the Trig Bro and enjoy the Ikari when you get there mate __________________ "My mom said the only reason men are alive is for lawn care and vehicle maintenance." - Tim Allen

Jun 12, 2009, 01:38 AM	Thread Starter #21
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	Re: need a new mouse..... now that i finally got to play some games with this ikari laser..... i can say that it still amazes... really an excellent product. now to see if it withstands the test of time... __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

Jun 12, 2009, 01:46 AM	#22
Mac Daddy DriverHeaven Extreme Member Join Date: Jul 2002 Location: Ontario, Canada Posts: 7,950 Rep Power: 79 System Specs	Re: need a new mouse..... Has here so far Bro have fun with it __________________ "My mom said the only reason men are alive is for lawn care and vehicle maintenance." - Tim Allen