|
|||||||
| Hardware Discussion & Support Discuss your computer - its components or ANY hardware, past/current/future you want, or ask our forum experts if you have a general problem with your hardware. |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Newbie
|
new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
Hi Everyone I'm Building a new Computer for Red and 2k Video Editing, Autodesk Maya, and on my off time i will be Folding on WCG/BOINC.
i was planing to get a Intel S5520SC but it does not support SLI Here is a List of Parts i will Be getting if there is anything thing that could be better, like the Liquid Cooling "first time doing Liquid Cooling" or the hard drives or the Raid card feel free to comment on it. SILVERSTONE TJ07 Intel Xeon E5520 TYAN S7025 AGM2NR Dual LGA 1366 Does not have LSI 1068E onboard Two 2x Patriot Signature 12GB (3 x 4GB) ECC Registered DDR3 1066 - 24GB Three 3x EVGA GeForce GTX 285 Classified Twelve 12x Western Digital RE3 WD1002FBYS 1TB -12TB HighPoint RocketRAID 3520 SILVERSTONE ST1500 1500W CoolIT WS 240 Nehalem Liquid Cooling Last edited by ThehAWKs; Sep 26, 2009 at 06:17 PM. |
|
|
|
|
|
#2 |
|
HH's Asteroids' Dominator
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
Is Red a new version of Purple?
__________________
![]() ![]() The people who are regarded as moral luminaries are those who forego ordinary pleasures themselves and find compensation in interfering with the pleasures of others(Bertrand Russell)"You go into Afghanistan, you got guys who slap women around for five years because they didn't wear a veil,You know, guys like that ain't got no manhood left anyway. So it's a hell of a lot of fun to shoot them." - Lt. Gen. James N. Mattis This is slavery, not to speak one's thought. [Euripides-The Phoenician Women (c.411-409 B.C.)] http://www.macedonia.info/FALLACIESANDFACTS.htm Sic semper tyrannis. |
|
|
|
|
|
|
|
DriverHeaven Newbie
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
No its Video Shot with RED ONE cameras http://www.red.com/
|
|
|
|
|
|
#4 |
|
HH's Asteroids' Dominator
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
Impressive.
Are you going to capture and edit in 4K or much lower? I think you should be ok with 1080p, but the other higher settings are just way beyond anything I have touched. Don't get me wrong, you have a beast there, I just can't possibly give an advice for that level.
__________________
![]() ![]() The people who are regarded as moral luminaries are those who forego ordinary pleasures themselves and find compensation in interfering with the pleasures of others(Bertrand Russell)"You go into Afghanistan, you got guys who slap women around for five years because they didn't wear a veil,You know, guys like that ain't got no manhood left anyway. So it's a hell of a lot of fun to shoot them." - Lt. Gen. James N. Mattis This is slavery, not to speak one's thought. [Euripides-The Phoenician Women (c.411-409 B.C.)] http://www.macedonia.info/FALLACIESANDFACTS.htm Sic semper tyrannis. |
|
|
|
|
|
#5 |
|
Going Insane.....
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
i have no experience with what you are doing, but i can help you fix some stuff up with that list.
that case, i have to say is designed pretty badly..... expensive as well, the way it cools components is strange and redundant. i recommend the Silverstone Raven RV02 Newegg.com - SILVERSTONE RAVEN RV02-BW Matte black 0.8mm Steel ATX Full Tower Computer Case - Computer Cases its just alot simpler to use. if you dont have to watercool, dont. especially if this is something that is rather critical to have a reliable system. a pair of quality heatsinks in the RV02 is a safer solution the power supply is good, though a bit excessive. the motherboard though, doesnt use SLI (nor do any other dual 1366 boards at this time) so depending on how the cards are going to be used, you may want to just save some money and buy a single HD 5870 GPU or use the money instead for a real Tesla or Quadro Card..... if i remember right, the Quadro and Teslas score several times better than their consumer counterparts in what they do
__________________
Hardwareheaven Super-Moderator last updated (5/18/11)
Rosewill FUTURE case replaces CM 690 II with its greater interior length. Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums! ![]() |
|
|
|
|
|
|
||
|
DriverHeaven Newbie
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
Quote:
Quote:
on using the CoolIT WS 240 Nehalem Liquid Cooling kit for the dual intel Xeon 5520 cpus. i wanted to use that because with three gtx 285 cards and 12 hard drives the air i think would get more heated. if you know any better options other than the coolit let me know. last the TYAN S7025 motherboard is certified as a Tesla Personal Supercomputer it can take 4 NVIDIA Tesla C1060 cards. the motherboard has four full double wide 16x Slots that run in 16x. i would think it would support the three GTX 285 cards which it still cheaper then getting one Quadro 4800 or 5800 card. |
||
|
|
|
|
|
#7 |
|
HardwareHeaven Senior Member
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
What about WC blocks for the 285's? Since you also have WC for the CPU's...
The EK-FC285 for example. Three 285's is a lot heat... Last edited by Bolletje; Sep 26, 2009 at 11:57 PM. |
|
|
|
|
|
|
|
|
DriverHeaven Newbie
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
Quote:
and for the Raid Card i picked out would that be a good option for me i want the most speed i could get out of the hard drives. Edit....... EK-FC285 i know is good but that would mean i would have to setup my own water cooling setup if there is a kit i could get that would cool both cpus and the three video cards tell me or what parts would be the best to get it running if i do that. |
|
|
|
|
|
|
#9 |
|
Xtreme
Join Date: Oct 2003
Location: Grande Prairie, AB, Can
Posts: 4,254
Rep Power: 101 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
TJ07 designed bad?!!? It is possible the best case on the market even 2+ years after its release.
Now for CPU cooling. There is no reason for watercooling w/ only two CPU's. You won't be overclocking the CPUs and w/ a good air cooler things will still remain quiet. Go w/ a pair of Cooler Master Hyper212+. They'll remain cool, and you won't notice much of a system temperature increase. Why the 3 GTX285's? Unless you are gaming, there is no point w/ going w/ so many videocards. Unless your apps support CUDA (and multi videocards at that), there is no point spending so much on videocards. The RocketRAID 3520 is at least 2 years old. The LSI 9260-8i is a much better choice. Higher seqential read/writes. Plus the RAID6 engine is far superior. Newegg.com - LSI LSI00198 PCI Express Low Profile SATA / SAS (Serial Attached SCSI) MegaRAID SAS 9260-8i Single - Controllers / RAID Cards |
|
|
|
|
|
|
|
|
DriverHeaven Newbie
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
Quote:
i wanted 3 GTX 285 cards to do Folding and help with rendering and converting using Cuda apps. the only reason i picked the rocket raid was becasue i have a 2300 in my setup i have now that does a good job. i will look in to the LSI LSI00198 looks like it has good read and write speeds which i need to do 2k Video editing. thanks for all the help on this setup i want to get it write the first time... |
|
|
|
|
|
|
#11 |
|
Xtreme
Join Date: Oct 2003
Location: Grande Prairie, AB, Can
Posts: 4,254
Rep Power: 101 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
Do BOINC/WCG support folding w/ CUDA?
|
|
|
|
|
|
|
|
DriverHeaven Newbie
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
|
|
|
|
|
|
#13 |
|
DH's oldest Geek
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
I water cool my 3870 X2 with a Koolance block. Here's a link to their GTX 285 block.
VID-NX285 (GeForce GTX 285 1GB) [no nozzles] - Water cooling systems, pc liquid cooling kit, cpu, video card, hard drive
__________________
When looking for a reason as to why things go wrong, never rule out sheer STUPIDITY ![]() ![]()
|
|
|
|
|
|
#14 |
|
HardwareHeaven Senior Member
|
Re: new Computer Build for Red and 2k Editing, Autodesk Maya,WCG/BOINC
Hmm, watercooling may not be the best option in this case. What about 2 GTX295's with the Single PCB?
Still a lot of SP's and like the same price. Or three GTX260's or 275's. Price is low (resp 170 dollar and 210 dollar) while the 285 is like 330. Mugen 2 for your CPU's may also be a nice option. They are quiet and their cooling capability is quite well. I don't know if 2 of them can put together side by side. Last edited by Bolletje; Sep 27, 2009 at 12:02 PM. |
|
|
|
![]() |
| Thread Tools | |
|
|