Couple of problems !

bunnyboiler · Sep 4, 2003, 03:19 PM

Just installed new mobo/processor, everything looked fine on boot-up. But when i insert a disc into
the dvd/ rom drive it will not run... keeps sayin " The application failed to initialize properly(0xc0000006)
click to terminate. My 2nd cd/w drive runs the disc ok ? Have i got my wires crossed along the line

Also my ge-force ti 4200 felt white hot

on close inspection i noticed the fan was not running
dont know if this happened on installation or prior, can anythin upset the graphics card when changing
mobo ? (it was my first attempt guys)

Al_Vampyre · Sep 4, 2003, 03:39 PM

Try giving the fan a clean m8, maybe a can of compressed air would do it, they do tend to pick up all sorts of dust etc and if you've just updated your mobo and processor a complete format and reinstall is nearly always necessary...

bunnyboiler · Sep 4, 2003, 06:15 PM

Allready formatted this morning before the error occured , and Ive taken the fan off my card to give it
a good clean, Cant see any loose wires from the card so im stumped !

My system seems to be crawling in certain areas, even though the upgrade has doubled everything
previously, and the amount of error reports im getting....grrrrrrr

Seriously considering going back to my athlon thunderbird and pc 133 ram had no problems at all !
( TRYING TO KEEP UP WITH YOU CHAPS )

scobywhru · Sep 4, 2003, 07:34 PM

The IDE drive cable could be bad, or teh drive itself could need a cleaning or be dead. Your Video card if the fans dead you can just go and get another Heatsink fan for it and they aren't too expensive and will let you overclock better if you do so.

Sharkims · Sep 4, 2003, 09:20 PM

I would always consider that the motherboard might have some issues... especialy if your system is crawling for no good reason.

Al_Vampyre · Sep 5, 2003, 09:41 AM

Have you updated to the latest bios for the mobo?

Sep 4, 2003, 03:19 PM	#1
bunnyboiler Join Date: Oct 2002 Location: wigan,lancs uk Posts: 0 Rep Power: 0	Couple of problems ! Just installed new mobo/processor, everything looked fine on boot-up. But when i insert a disc into the dvd/ rom drive it will not run... keeps sayin " The application failed to initialize properly(0xc0000006) click to terminate. My 2nd cd/w drive runs the disc ok ? Have i got my wires crossed along the line Also my ge-force ti 4200 felt white hot on close inspection i noticed the fan was not running dont know if this happened on installation or prior, can anythin upset the graphics card when changing mobo ? (it was my first attempt guys)

Sep 4, 2003, 03:39 PM	#2
Al_Vampyre HardwareHeaven Senior Member Join Date: Jan 2003 Location: Scotland Posts: 1,532 Rep Power: 72 System Specs	Try giving the fan a clean m8, maybe a can of compressed air would do it, they do tend to pick up all sorts of dust etc and if you've just updated your mobo and processor a complete format and reinstall is nearly always necessary... __________________ "Knowledge is knowing that a tomato is a fruit; wisdom is knowing not to put it in a fruit salad" - Brian O'Driscoll - Ireland Rugby Team 2009 Grand Slam winning Captain.

Sep 4, 2003, 07:34 PM	#4
scobywhru DriverHeaven Senile Member Join Date: Nov 2002 Location: Penthouse Basement Posts: 619 Rep Power: 0	The IDE drive cable could be bad, or teh drive itself could need a cleaning or be dead. Your Video card if the fans dead you can just go and get another Heatsink fan for it and they aren't too expensive and will let you overclock better if you do so. __________________

Sep 4, 2003, 09:20 PM	#5
Sharkims Seen my brain? Join Date: Jul 2003 Location: WA,USA Posts: 760 Rep Power: 0	I would always consider that the motherboard might have some issues... especialy if your system is crawling for no good reason. __________________ System-1: MSI K8N Neo Platinum \|\| A64 3200+(200x11) - Zalman 7000A-AlCu \|\| 1x1gb OCZ PC3200@400(3-3-3-7) \|\| 9800XT \|\| WD Raptors 2x36 RAID0 System-2: MSI 875P Neo-FIS2R \|\| P4 2.4c(FSB:200) - Intel Cooler \|\| 2x256 GEIL PC3200@400(2-3-3-6) \|\| AIW9000 \|\| WD SE 120x2 RAID0 System-3: DELL Inspiron 9100 \|\| P4 3.0c(mobile) \|\| 2x256mb PC3200(3-3-3-8) \|\| Mobility Radeon 9700 - 128mb \|\| WSXGA+ 15.4" \|\| 60gb 5400RPM 8mb

Sep 5, 2003, 09:41 AM	#6
Al_Vampyre HardwareHeaven Senior Member Join Date: Jan 2003 Location: Scotland Posts: 1,532 Rep Power: 72 System Specs	Have you updated to the latest bios for the mobo? __________________ "Knowledge is knowing that a tomato is a fruit; wisdom is knowing not to put it in a fruit salad" - Brian O'Driscoll - Ireland Rugby Team 2009 Grand Slam winning Captain.

Sep 4, 2003, 06:15 PM	Thread Starter #3
bunnyboiler Join Date: Oct 2002 Location: wigan,lancs uk Posts: 0 Rep Power: 0	Allready formatted this morning before the error occured , and Ive taken the fan off my card to give it a good clean, Cant see any loose wires from the card so im stumped ! My system seems to be crawling in certain areas, even though the upgrade has doubled everything previously, and the amount of error reports im getting....grrrrrrr Seriously considering going back to my athlon thunderbird and pc 133 ram had no problems at all ! ( TRYING TO KEEP UP WITH YOU CHAPS )