Sorry for the little information!

as_izaak · Sep 23, 2003, 11:13 AM

I'm on Barton 2500+, Abit Nf7 - s, SLK 900, Kingston pc 2700 256 x 2, WD 120gb 7200 rpm/8mb. Please advice on limits and tips on OC. THanks

Zardon · Sep 23, 2003, 11:27 AM

good point to start is to crank your voltage up to 1.8 and try 11.5x200 = 2300mhz. if it fails to boot try raising your voltage a little at a time watching your temps, but that heatsink is the same monster I use and you can safely run at 1.9 volts all day. you want to aim for 200fsb minimum.

EDIT: just saw you are runinng DDR2700 might not hit 200fsb... try a lower setting initially and the higher you go lower your latencies if you are failing to boot..

Kgentatszu] · Sep 23, 2003, 11:28 AM

huh???? didnt you have your own thread before????

what happen to this??-----> http://www.hardwareheaven.com/showthre...threadid=26894

Kgentatszu] · Sep 23, 2003, 11:31 AM

by the way, Zardon, i dont think its a good idea for him to crank up to 1.9 cause the weather here lately is pretty hot!

toddsmack2k · Sep 23, 2003, 05:07 PM

Good eye Maxy! I closed the other thread as_izaak as you can see HERE . Keep on enjoying DH buds and get to overclocking!

Sep 23, 2003, 11:13 AM	#1
as_izaak DriverHeaven Junior Member Join Date: Sep 2003 Location: Kuching Posts: 31 Rep Power: 0	Sorry for the little information! I'm on Barton 2500+, Abit Nf7 - s, SLK 900, Kingston pc 2700 256 x 2, WD 120gb 7200 rpm/8mb. Please advice on limits and tips on OC. THanks

Sep 23, 2003, 05:07 PM	#5
toddsmack2k It Never..... Join Date: Nov 2002 Location: Kentucky Posts: 3,173 Rep Power: 0	Good eye Maxy! I closed the other thread as_izaak as you can see HERE . Keep on enjoying DH buds and get to overclocking! __________________ [color=blue]*Bleeding From the Inside Pouring Out, The* *DriverHeaven* Spiral, We Shall Never Let Go Of.[/color]

Sep 23, 2003, 11:27 AM	#2
Zardon DriverHeaven Founder Join Date: May 2002 Posts: 32,480 Rep Power: 179	good point to start is to crank your voltage up to 1.8 and try 11.5x200 = 2300mhz. if it fails to boot try raising your voltage a little at a time watching your temps, but that heatsink is the same monster I use and you can safely run at 1.9 volts all day. you want to aim for 200fsb minimum. EDIT: just saw you are runinng DDR2700 might not hit 200fsb... try a lower setting initially and the higher you go lower your latencies if you are failing to boot..

Sep 23, 2003, 11:28 AM	#3
Kgentatszu] DriverHeaven Senior Member Join Date: Apr 2003 Location: Australia Posts: 1,802 Rep Power: 0	huh???? didnt you have your own thread before???? what happen to this??-----> http://www.hardwareheaven.com/showthre...threadid=26894

Sep 23, 2003, 11:31 AM	#4
Kgentatszu] DriverHeaven Senior Member Join Date: Apr 2003 Location: Australia Posts: 1,802 Rep Power: 0	by the way, Zardon, i dont think its a good idea for him to crank up to 1.9 cause the weather here lately is pretty hot!