Possible fix for 9.2 and later

**Spike** · Feb 24, 2009, 11:16 AM

This is for the ATI Mobility Modder.

Download the full zip from here and then download this and extract it to the place where the modder is installed. This should fix the problem that the 9.2 and later driver infs can't be modified.

Mac Daddy · Feb 24, 2009, 12:37 PM

Right on top of things as always Spike

catcraft · Feb 24, 2009, 01:20 PM

driver installation works fine, but the ccc doesn't work... it returns a failure like that: the ccc is not supported by the driver version of your enabled graphics adapter[...]

i got a x2300 (M64) Grapics on my samsung r60 plus

btw. 9.1 works..

necrophyte · Feb 24, 2009, 03:01 PM

i dont know about each single step the mobility modder does exactly, but until 9.1 i used it and was quite satisfied with it, although every now and then there were some display errors in certain games etc. but in general, the performance of my mobility hd2600 (256mb) was very good.

but when intended to install 9.2, i came across a page with instructions on downgrading from vista to xp for my notebook (hp 8510p), and there was a very easy way to modify the (desktop) driver explained.

the point is to add the corresponding line (device id, found in msinfo32.exe > components > display > PNP device id) into the CX_####.inf file, and then install the driver from the device manager pointing to this .inf file - thats all. afterwards ccc etc. can be installed without midifying anything.

for my mobility hd2600 the line to add to the list under [ATI.Mfg.NTx86] is:
"ATI Mobility Radeon HD 2600" = ati2mtag_RV630, PCI\VEN_1002&DEV_9581

i dont know if this is applicable to every mobility card or on any notebook, but until now 9.2 is working perfectly for me, and for example the cs:s stress test shows 3-4fps more than with the mmodded 9.1 driver before (which was the same with earlier mmodded drivers).

my intention is absolutely not to make people stop using dh's mobility modder, but to check whether there's a way to avoid certain issues (as far as i know mainly opengl-related) frequently experienced when using mmodded drivers, and whether it would be enough just to let the mmodder add the corresponding line to the .inf file and maybe apply certain changes to be able to install the driver using the setup file, and not through device manager, like one has to when only adding this line to the .inf file manually.

ozzieXP · Feb 24, 2009, 07:11 PM

Quote:

Originally Posted by Spike

This is for the ATI Mobility Modder.

Download the full zip from here and then download this and extract it to the place where the modder is installed. This should fix the problem that the 9.2 and later driver infs can't be modified.

Finally got it working... for those of you using Windows 7, remove the 6.1 reference in the inf file. It should look like this

[Manufacturer]
%ATI% = ATI.Mfg, NTx86.6.0

Hope it works for the rest!

richardhula · Mar 2, 2009, 03:13 PM

MM 1.1.2.0 works fine with 9.2 on Windows 7 64 bit & HD 3470. Just added this to CL_75976.inf after removing original HD 3450 reference to avoid incorrect hardware display ident:

"ATI MOBILITY RADEON HD 3450" = ati2mtag_M72, PCI\VEN_1002&DEV_95C9
"ATI Mobility Radeon HD 3470" = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_01381025
"ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_013B1025
"ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_011F1025
"ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_01491025
"ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_013F1025
"ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_011E1025
"ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_013C1025
"ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_013E1025
"ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_01211025

Richard

Renesis · Mar 2, 2009, 08:12 PM

Why are 3xxx generation cards referenced as M7x cards instead of M8x, for example, mobility radeon 3650 is M86 and not M76, and mobility radeon 3470 is M82-XT and not M72.

Holy777 · Mar 13, 2009, 01:18 AM

Quote:

Originally Posted by catcraft

driver installation works fine, but the ccc doesn't work... it returns a failure like that: the ccc is not supported by the driver version of your enabled graphics adapter[...]

i got a x2300 (M64) Grapics on my samsung r60 plus

btw. 9.1 works..

First of all Many Tank for your JOB!

I have the Same Failure all the Time.
Driver is fine but CCC doesnt work

i have Mobility Radeon x1600

Any Suggestions how to Fix that?

gicgioc · Mar 15, 2009, 07:44 PM

i tried to modify catalyst 9.2 for windows xp 64bit with this version of mobility modder 1.1.2.0, but it doesn't work (the tool doesn't modify anything). xp32 & vista32 work perfectly. sorry for my bad english.

Pr0xiMUS · Mar 19, 2009, 01:26 AM

It does not work anymore in the 9_3_vista32_win7_32_dd_ccc_wdm_enu drivers. :S

addam · Mar 19, 2009, 06:59 PM

Hi,

A modified the 9.3 .inf file with the old notepad way...

First, download the 9.3 catalyst, unpack them

Run mobility modder, and modify the driver

Download this file, and unzip to
\ATI\Support\9_3_vista32_win7_32_dd_ccc_wdm_enu\Pa ckages\Drivers\Display\LH_INF, and overwrite the old ones.

Then install the driver. It worked for me (Vista 32 bit SP2 RC, Mobility X1600).

At the end of install, installer say's there are some warnings, but the log is empty, and the driver works.

Warmuncher · Mar 20, 2009, 12:28 AM

What did you change in these files?

Pr0xiMUS · Mar 20, 2009, 02:57 PM

It still doesn't work as it should because the installation doesn't show new driver to install, just ccc and runtimes. And there is no display flickering as it should when installing new display drivers. And driver version in devmgmt is still from January. So, no new drivers for me (Win7, HD 2600 mobility). I tried to modify inf files by myself but no luck.

necrophyte · Mar 20, 2009, 03:36 PM

http://www.hardwareheaven.com/mobility...ty-modder.html

NetSoerfer · Mar 20, 2009, 04:22 PM

Hmm, the link to the Beta exe is broken... And I haven't had any success with the modification suggested in necrophyte's link either

I'm using a Mobility Radeon X1400 on Windows 7 b7000 x32.

mtrx · Mar 21, 2009, 06:27 PM

Quote:

Originally Posted by ozzieXP

Finally got it working... for those of you using Windows 7, remove the 6.1 reference in the inf file. It should look like this

[Manufacturer]
%ATI% = ATI.Mfg, NTx86.6.0

Hope it works for the rest!

thanx askım benım bıtanem yawrum hayatım

richardhula · Mar 21, 2009, 06:33 PM

9.3 drivers only, modded with MM 1.1.2.0. installed fine on Vista 32 bit, although I did get error message at end of installation as mentioned above by addam.

On Windows 7 64 bit using same method it installed without error but left me with generic HD 3400 series device description (I have HD 3470) & much older driver version. After uninstalling all ATI drivers managed to re-install 9.2 drivers only successfully.

Anyone got a work around for this 64 bit OS problem with 9.3?

Richard

EAKMotorsports · Mar 22, 2009, 03:42 AM

Funny thing with the 9.2 driver for VISTA x64 works fine for me and I using Win7 x64 and I have the 3470 in my laptop. Now with 9.3 driver that is for Win7 x64 and vista x64 everybody have problems with. I´m so disappointed with ATI I love ATI I think that have better image quality that nvidia. But in last month nvidia made a great step forward they now have drivers for notebooks. I hope the ATI do the same thing soon.

NetSoerfer · Mar 22, 2009, 09:06 AM

Still doesn't work, neither with Beta 1.1.2.0 nor with manually editing the inf files. If I mod the driver, it will install CCC along with the Installation Manager and the VC++ Redist, if I don't mod it it'll only install Installation Manager and the VC++ Redist, not even the CCC. But I haven't found any way at all to get it to install the driver itself.

I've tried all suggestions here, those from this thread, those from necrophyte's Catalyst 9.3 w/ Mobility Modder? link, none works.

Windows 7 b7000 x32, Radeon X1400. If you guys have any other ideas, please let me know.

@EAKMotorsports:
You're blaming the wrong guys. As you can read on the MM.Net page, the OEMs don't allow ATI to release drivers for their cards, presumably because they don't want support incidents due to drivers not tested by them.

I'd imagine that if ATI didn't want their driver to be used with their laptop cards, they'd have no trouble disabling MM.Net from one driver version to the next. The fact that the same version of MM.Net has worked for more than half a year should be testimony enough that ATI are not working against MM.Net.

antiflux · Mar 23, 2009, 04:23 AM

Hey all, I finally got 9.3 (CCC and driver) to work with my ATI Mobility Radeon X1200 in Windows 7 64-bit (Build 7057) ... I didnt use the modder program. Quakelive seems to be running fine without the flickering problem in full screen mode. Also the game is MUCH smoother than it was in Windows XP SP3 32-bit.

What I did:

1) As per OzzieXP's post I removed the 6.1 references in both of the .inf files (C7_77072.inf & CH_76829.inf).
i.e. changed anything that displayed "NTamd64.6.1" to "NTamd64.6.1"

2) Manually edited the .inf (C7_77072.inf & CH_76829.inf) with my device hardware information
e.g. "ATI Radeon X1200 Series" = ati2mtag_RS690, PCI\VEN_1002&DEV_791F

you can find the device ID in device manager under the device properties...

THANKS NOW I CAN PLAY QUAKELIVE AGAIN! =)

http://img14.imageshack.us/img14/7066/worksn.jpg

EAKMotorsports · Mar 23, 2009, 09:04 PM

Quote:

Originally Posted by antiflux

Hey all, I finally got 9.3 (CCC and driver) to work with my ATI Mobility Radeon X1200 in Windows 7 64-bit (Build 7057) ... I didnt use the modder program. Quakelive seems to be running fine without the flickering problem in full screen mode. Also the game is MUCH smoother than it was in Windows XP SP3 32-bit.

What I did:

1) As per OzzieXP's post I removed the 6.1 references in both of the .inf files (C7_77072.inf & CH_76829.inf).
i.e. changed anything that displayed "NTamd64.6.1" to "NTamd64.6.1"

2) Manually edited the .inf (C7_77072.inf & CH_76829.inf) with my device hardware information
e.g. "ATI Radeon X1200 Series" = ati2mtag_RS690, PCI\VEN_1002&DEV_791F

you can find the device ID in device manager under the device properties...

THANKS NOW I CAN PLAY QUAKELIVE AGAIN! =)

http://img14.imageshack.us/img14/7066/worksn.jpg

great worked for you but I didn´t understand the part u say "changed anything that displayed "NTamd64.6.1" to "NTamd64.6.1" " that is correct? thanks for your help.

EAKMotorsports · Mar 23, 2009, 09:08 PM

Quote:

Originally Posted by Renesis

Why are 3xxx generation cards referenced as M7x cards instead of M8x, for example, mobility radeon 3650 is M86 and not M76, and mobility radeon 3470 is M82-XT and not M72.

Yeah true I want to know that too.

antiflux · Mar 23, 2009, 09:16 PM

Quote:

Originally Posted by EAKMotorsports

great worked for you but I didn´t understand the part u say "changed anything that displayed "NTamd64.6.1" to "NTamd64.6.1" " that is correct? thanks for your help.

anything in the two .inf files that says "NTamd64.6.1" change to "NTamd64.6.0"

EAKMotorsports · Mar 24, 2009, 12:15 AM

thx for the answer antiflux. I changed the lines but I still cannot get it work.

japper88 · Mar 25, 2009, 12:50 AM

Thanks Spike, it worked like a charm :-D.

afroman84 · Mar 26, 2009, 09:26 AM

I have installed the graphic driver through the modder. I had to erase the 3450 line in the inf file so that it recognize my graphic card 3470. But now the Avivo Video settings in the ccc don't work, I can't change colors in Avivo for the video. Does anybody have the same problem? What could be the problem? how can fix it?

Sony FW31J
Win Vista 32 bit SP1
Mobility Radeon HD 3470

EAKMotorsports · Mar 30, 2009, 12:11 AM

Anyone with win7 x64 and 3470 have succeed.?

lordgotmilk · Apr 1, 2009, 02:12 PM

Quote:

Originally Posted by Spike

This is for the ATI Mobility Modder.

Download the full zip from here and then download this and extract it to the place where the modder is installed. This should fix the problem that the 9.2 and later driver infs can't be modified.

I tried this and the file to be extracted into MM errored when I tried to open it. When I exited or hit continue, it just brought up MM.

edit**Think I got that to work. I'll know soon enough. Give me the time to uninstall everything and try to mod and install the driver and I'll post back on whether it worked or not.

lordgotmilk · Apr 1, 2009, 02:23 PM

Hi all,

Getting ready to go round 3 with getting my driver updated. In the next hour or so, I'll be doing whatever I can to get this to work. Hopefully, I can get a work around to get 9.3 installed. If not, I'll try 9.1.

I'm working on a Gateway 6864FX with Vista Home Premium 64 bit and ATI Mobility HD2600 with 512 megs ddr3.

Any help is appreciated.

lordgotmilk · Apr 1, 2009, 03:28 PM

Alright...here's an update.

I extracted the file into MM. I downloaded the individual driver, ccc from ati.com. I then uninstalled everything ATI in program files, uninstalled the old driver through device manager and then used drivercleaner to clean it up. Turned off UAC and the similar part of my security programs and rebooted.

Upon reboot, I ran the driver to extract it to the right place and then cancelled. I then fired up MM, pointed it to the driver folder and hit Modify. Then I changed memory from 256 to the needed 512. When that finished, I ran the driver setup and it finally took. I'm now running the newest driver.

Sounds like a done deal, but when I then went to install CCC, it showed as successful, but even after rebooting again, I have no CCC in program files. Also, with this it did not install the newest HDMI driver, which is needed for my use. The original HDMI driver from Gateway has a glitch with HDMI which causes the sound not to work and causes stuttering in the video.

What recommendations can you make? Should I try downloading the full CCC driver package and doing a custom install and just remove the driver itself from the list of what to install? Is that possible?

Thanks for any help.

Feb 24, 2009, 11:16 AM	#1
Spike Driver Cleaner Maker Join Date: Jul 2002 Location: Netherlands Posts: 2,088 Rep Power: 71 System Specs	Possible fix for 9.2 and later This is for the ATI Mobility Modder. Download the full zip from here and then download this and extract it to the place where the modder is installed. This should fix the problem that the 9.2 and later driver infs can't be modified. __________________

Feb 24, 2009, 12:37 PM	#2
Mac Daddy DriverHeaven Extreme Member Join Date: Jul 2002 Location: Ontario, Canada Posts: 7,950 Rep Power: 79 System Specs	Re: Possible fix for 9.2 and later Right on top of things as always Spike __________________ "My mom said the only reason men are alive is for lawn care and vehicle maintenance." - Tim Allen

Feb 24, 2009, 01:20 PM	#3
catcraft DriverHeaven Newbie Join Date: Feb 2009 Posts: 1 Rep Power: 0	AW: Possible fix for 9.2 and later driver installation works fine, but the ccc doesn't work... it returns a failure like that: the ccc is not supported by the driver version of your enabled graphics adapter[...] i got a x2300 (M64) Grapics on my samsung r60 plus btw. 9.1 works..

Feb 24, 2009, 03:01 PM	#4
necrophyte HardwareHeaven Lover Join Date: Feb 2008 Location: 1130 Vienna, Austria & Zagreb, Croatia Posts: 131 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later i dont know about each single step the mobility modder does exactly, but until 9.1 i used it and was quite satisfied with it, although every now and then there were some display errors in certain games etc. but in general, the performance of my mobility hd2600 (256mb) was very good. but when intended to install 9.2, i came across a page with instructions on downgrading from vista to xp for my notebook (hp 8510p), and there was a very easy way to modify the (desktop) driver explained. the point is to add the corresponding line (device id, found in msinfo32.exe > components > display > PNP device id) into the CX_####.inf file, and then install the driver from the device manager pointing to this .inf file - thats all. afterwards ccc etc. can be installed without midifying anything. for my mobility hd2600 the line to add to the list under [ATI.Mfg.NTx86] is: "ATI Mobility Radeon HD 2600" = ati2mtag_RV630, PCI\VEN_1002&DEV_9581 i dont know if this is applicable to every mobility card or on any notebook, but until now 9.2 is working perfectly for me, and for example the cs:s stress test shows 3-4fps more than with the mmodded 9.1 driver before (which was the same with earlier mmodded drivers). my intention is absolutely not to make people stop using dh's mobility modder, but to check whether there's a way to avoid certain issues (as far as i know mainly opengl-related) frequently experienced when using mmodded drivers, and whether it would be enough just to let the mmodder add the corresponding line to the .inf file and maybe apply certain changes to be able to install the driver using the setup file, and not through device manager, like one has to when only adding this line to the .inf file manually.

Mar 2, 2009, 03:13 PM	#6
richardhula HardwareHeaven Junior Member Join Date: Feb 2009 Posts: 51 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later MM 1.1.2.0 works fine with 9.2 on Windows 7 64 bit & HD 3470. Just added this to CL_75976.inf after removing original HD 3450 reference to avoid incorrect hardware display ident: "ATI MOBILITY RADEON HD 3450" = ati2mtag_M72, PCI\VEN_1002&DEV_95C9 "ATI Mobility Radeon HD 3470" = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_01381025 "ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_013B1025 "ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_011F1025 "ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_01491025 "ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_013F1025 "ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_011E1025 "ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_013C1025 "ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_013E1025 "ATI Mobility Radeon HD 3470 " = ati2mtag_M72, PCI\VEN_1002&DEV_95C4&SUBSYS_01211025 Richard

Mar 2, 2009, 08:12 PM	#7
Renesis HardwareHeaven Newbie Join Date: Mar 2009 Posts: 5 Rep Power: 0	Re: Possible fix for 9.2 and later Why are 3xxx generation cards referenced as M7x cards instead of M8x, for example, mobility radeon 3650 is M86 and not M76, and mobility radeon 3470 is M82-XT and not M72.

Mar 15, 2009, 07:44 PM	#9
gicgioc DriverHeaven Newbie Join Date: Mar 2009 Posts: 1 Rep Power: 0	Re: Possible fix for 9.2 and later i tried to modify catalyst 9.2 for windows xp 64bit with this version of mobility modder 1.1.2.0, but it doesn't work (the tool doesn't modify anything). xp32 & vista32 work perfectly. sorry for my bad english.

Mar 19, 2009, 01:26 AM	#10
Pr0xiMUS DriverHeaven Newbie Join Date: Oct 2007 Posts: 7 Rep Power: 0	Re: Possible fix for 9.2 and later It does not work anymore in the 9_3_vista32_win7_32_dd_ccc_wdm_enu drivers. :S

Mar 19, 2009, 06:59 PM	#11
addam DriverHeaven Newbie Join Date: Feb 2009 Location: Budapest, Hungary Posts: 3 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later Hi, A modified the 9.3 .inf file with the old notepad way... First, download the 9.3 catalyst, unpack them Run mobility modder, and modify the driver Download this file, and unzip to \ATI\Support\9_3_vista32_win7_32_dd_ccc_wdm_enu\Pa ckages\Drivers\Display\LH_INF, and overwrite the old ones. Then install the driver. It worked for me (Vista 32 bit SP2 RC, Mobility X1600). At the end of install, installer say's there are some warnings, but the log is empty, and the driver works.

Mar 20, 2009, 12:28 AM	#12
Warmuncher DriverHeaven Newbie Join Date: Mar 2009 Posts: 1 Rep Power: 0	Re: Possible fix for 9.2 and later What did you change in these files?

Mar 20, 2009, 02:57 PM	#13
Pr0xiMUS DriverHeaven Newbie Join Date: Oct 2007 Posts: 7 Rep Power: 0	Re: Possible fix for 9.2 and later It still doesn't work as it should because the installation doesn't show new driver to install, just ccc and runtimes. And there is no display flickering as it should when installing new display drivers. And driver version in devmgmt is still from January. So, no new drivers for me (Win7, HD 2600 mobility). I tried to modify inf files by myself but no luck.

Mar 20, 2009, 03:36 PM	#14
necrophyte HardwareHeaven Lover Join Date: Feb 2008 Location: 1130 Vienna, Austria & Zagreb, Croatia Posts: 131 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later http://www.hardwareheaven.com/mobility...ty-modder.html

Mar 20, 2009, 04:22 PM	#15
NetSoerfer DriverHeaven Newbie Join Date: Oct 2004 Posts: 14 Rep Power: 0	Re: Possible fix for 9.2 and later Hmm, the link to the Beta exe is broken... And I haven't had any success with the modification suggested in necrophyte's link either I'm using a Mobility Radeon X1400 on Windows 7 b7000 x32. __________________ [color=black]If I was inappropriately blunt - sorry. I do that a lot.[/color]

Mar 21, 2009, 06:33 PM	#17
richardhula HardwareHeaven Junior Member Join Date: Feb 2009 Posts: 51 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later 9.3 drivers only, modded with MM 1.1.2.0. installed fine on Vista 32 bit, although I did get error message at end of installation as mentioned above by addam. On Windows 7 64 bit using same method it installed without error but left me with generic HD 3400 series device description (I have HD 3470) & much older driver version. After uninstalling all ATI drivers managed to re-install 9.2 drivers only successfully. Anyone got a work around for this 64 bit OS problem with 9.3? Richard

Mar 22, 2009, 03:42 AM	#18
EAKMotorsports HardwareHeaven Junior Member Join Date: Apr 2006 Posts: 22 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later Funny thing with the 9.2 driver for VISTA x64 works fine for me and I using Win7 x64 and I have the 3470 in my laptop. Now with 9.3 driver that is for Win7 x64 and vista x64 everybody have problems with. I´m so disappointed with ATI I love ATI I think that have better image quality that nvidia. But in last month nvidia made a great step forward they now have drivers for notebooks. I hope the ATI do the same thing soon. Last edited by EAKMotorsports; Mar 22, 2009 at 04:02 AM.

Mar 22, 2009, 09:06 AM	#19
NetSoerfer DriverHeaven Newbie Join Date: Oct 2004 Posts: 14 Rep Power: 0	Re: Possible fix for 9.2 and later Still doesn't work, neither with Beta 1.1.2.0 nor with manually editing the inf files. If I mod the driver, it will install CCC along with the Installation Manager and the VC++ Redist, if I don't mod it it'll only install Installation Manager and the VC++ Redist, not even the CCC. But I haven't found any way at all to get it to install the driver itself. I've tried all suggestions here, those from this thread, those from necrophyte's Catalyst 9.3 w/ Mobility Modder? link, none works. Windows 7 b7000 x32, Radeon X1400. If you guys have any other ideas, please let me know. @EAKMotorsports: You're blaming the wrong guys. As you can read on the MM.Net page, the OEMs don't allow ATI to release drivers for their cards, presumably because they don't want support incidents due to drivers not tested by them. I'd imagine that if ATI didn't want their driver to be used with their laptop cards, they'd have no trouble disabling MM.Net from one driver version to the next. The fact that the same version of MM.Net has worked for more than half a year should be testimony enough that ATI are not working against MM.Net. __________________ [color=black]If I was inappropriately blunt - sorry. I do that a lot.[/color] Last edited by NetSoerfer; Mar 22, 2009 at 09:48 AM.

Mar 23, 2009, 04:23 AM	#20
antiflux DriverHeaven Newbie Join Date: Jan 2008 Posts: 3 Rep Power: 0	Re: Possible fix for 9.2 and later Hey all, I finally got 9.3 (CCC and driver) to work with my ATI Mobility Radeon X1200 in Windows 7 64-bit (Build 7057) ... I didnt use the modder program. Quakelive seems to be running fine without the flickering problem in full screen mode. Also the game is MUCH smoother than it was in Windows XP SP3 32-bit. What I did: 1) As per OzzieXP's post I removed the 6.1 references in both of the .inf files (C7_77072.inf & CH_76829.inf). i.e. changed anything that displayed "NTamd64.6.1" to "NTamd64.6.1" 2) Manually edited the .inf (C7_77072.inf & CH_76829.inf) with my device hardware information e.g. "ATI Radeon X1200 Series" = ati2mtag_RS690, PCI\VEN_1002&DEV_791F you can find the device ID in device manager under the device properties... THANKS NOW I CAN PLAY QUAKELIVE AGAIN! =) http://img14.imageshack.us/img14/7066/worksn.jpg

Mar 24, 2009, 12:15 AM	#24
EAKMotorsports HardwareHeaven Junior Member Join Date: Apr 2006 Posts: 22 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later thx for the answer antiflux. I changed the lines but I still cannot get it work. Last edited by EAKMotorsports; Mar 24, 2009 at 12:26 AM.

Mar 25, 2009, 12:50 AM	#25
japper88 DriverHeaven Newbie Join Date: Mar 2009 Posts: 2 Rep Power: 0	Re: Possible fix for 9.2 and later Thanks Spike, it worked like a charm :-D.

Mar 26, 2009, 09:26 AM	#26
afroman84 DriverHeaven Newbie Join Date: Mar 2009 Posts: 1 Rep Power: 0	Re: Possible fix for 9.2 and later I have installed the graphic driver through the modder. I had to erase the 3450 line in the inf file so that it recognize my graphic card 3470. But now the Avivo Video settings in the ccc don't work, I can't change colors in Avivo for the video. Does anybody have the same problem? What could be the problem? how can fix it? Sony FW31J Win Vista 32 bit SP1 Mobility Radeon HD 3470

Mar 30, 2009, 12:11 AM	#27
EAKMotorsports HardwareHeaven Junior Member Join Date: Apr 2006 Posts: 22 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later Anyone with win7 x64 and 3470 have succeed.?

Apr 1, 2009, 02:23 PM	#29
lordgotmilk DriverHeaven Newbie Join Date: Apr 2009 Posts: 7 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later Hi all, Getting ready to go round 3 with getting my driver updated. In the next hour or so, I'll be doing whatever I can to get this to work. Hopefully, I can get a work around to get 9.3 installed. If not, I'll try 9.1. I'm working on a Gateway 6864FX with Vista Home Premium 64 bit and ATI Mobility HD2600 with 512 megs ddr3. Any help is appreciated.

Apr 1, 2009, 03:28 PM	#30
lordgotmilk DriverHeaven Newbie Join Date: Apr 2009 Posts: 7 Rep Power: 0 System Specs	Re: Possible fix for 9.2 and later Alright...here's an update. I extracted the file into MM. I downloaded the individual driver, ccc from ati.com. I then uninstalled everything ATI in program files, uninstalled the old driver through device manager and then used drivercleaner to clean it up. Turned off UAC and the similar part of my security programs and rebooted. Upon reboot, I ran the driver to extract it to the right place and then cancelled. I then fired up MM, pointed it to the driver folder and hit Modify. Then I changed memory from 256 to the needed 512. When that finished, I ran the driver setup and it finally took. I'm now running the newest driver. Sounds like a done deal, but when I then went to install CCC, it showed as successful, but even after rebooting again, I have no CCC in program files. Also, with this it did not install the newest HDMI driver, which is needed for my use. The original HDMI driver from Gateway has a glitch with HDMI which causes the sound not to work and causes stuttering in the video. What recommendations can you make? Should I try downloading the full CCC driver package and doing a custom install and just remove the driver itself from the list of what to install? Is that possible? Thanks for any help.