1.0b3 driver bugs

**Eugene Gavrilov** · Aug 15, 2008, 03:25 PM

please report 1.0b3-specific issues and bugs here

if you think the bug requires additional information or discussion, start a new topic and do only post a very brief description of the problem in this thread (as well as a link to your new topic)

PLEASE do not post suggestions, ideas, 'thanks', 'how do I' questions here!

E.

Oxtie · Aug 15, 2008, 09:26 PM

1. Eugene, All sounds are "TOO CRISPY" as if people are blowing from their nose (SSSssssss@Peak & ChChchch@PeakDrop)
2. A Stereo (2.0) mp3 file only sounds on Channel 1, Channel 2 and Woofer (Not on Chan 3,4,5)
(Surrounded not enabled on default driver installation)
3. Front Left and Front Right OK! (default config) but other channels numbers assigned to wrong speakers
Audigy 2 ZS (035x) Pre-installed on Dell (not OEM built)
Front Center =/= 3
Sub Woofer =/= 4
Left Surrounded (Rear Left) =/= 5
Right Surrounded (Rear Right) =/= 6

Correct order,
Rear Left = 3
Rear Right = 4
Front Center = 5
Sub Woofer = 6

4. Like the previous release, under 48000 hz, 'M','3','4','5','6' is disabled.

5. Sound distortion, Temp work around here

(Edit minutes in numbers at distortion start point)

Any guys reading my issue here, please confirm these with your sound card model and post with your model name etc (Example: Audigy 2ZS kX SB035x 10k2 [d8c0]). If you have new issues, I will read and edit this post to confirm it.

nekton · Aug 16, 2008, 01:47 AM

Same here; Audigy works fine from back stereo but suddenly degrades at 9 minutes (Leopard 10.5.4). Great start and hope you can fix the time-related degrade.
Gave me new hope for using my old Audigy—if you can fix this problem, I will definitely donate.

hquest · Aug 16, 2008, 04:11 AM

Same as from v1.0b2:

Reporting working driver for analog outputs on an Audigy 2 ZS Platinum SB0350 EMU10k2 in both 5.1 sound config and (simultaneously) on frontal panel line output, on Mac OS X 10.5.4.

As others reported, audio gets distorted after some time -- like about 4 mins playing -- but gets back normal in less than a minute if left playing (isn't driver running out of clock sync?). After this happens 3-4 times, sound is completely distorted, and a kextunload/kextload is mandatory.

No remapping needed for speakers on Audio MIDI Setup.

Quick edit: Audio MIDI Setup app reports output as 8ch-32bit -- wasn't it supposed to be 24-bit?)

rokmc820 · Aug 16, 2008, 03:58 PM

Hi~

System info.
OS : Leopard 10.5.4(Hackintosh)
CPU : Q6600 2.4GHz@Quad core
M/B : Asus P5K-E WiFi
RAM : 4GB

SOUND : SB0060 (e880) / Sound Blaster Live! 5.1

uhm...

2chanel only.. and noise..(SSSssssss chchchchchchch)

Chanel select possible! but no changed.

Good job.

catboy · Aug 16, 2008, 09:04 PM

Hi all
my card:
Audigy 2 Zs: SB0350 10k2 [b400]
Vendor: 0x1102
Device id: 0x0004 (7003 is game port ups..)

OS: Leopard 10.5.4 intel
Sound system format: 48000 hz 8ch-32bit !!!!!!
the bugs is the same.

but first time i get 20 min w/sound! with VLC player and digital output (i can't get AC3 output... )

Test in Reason:
All channel connected but only 1 & 2 available so only Stereo

existation · Aug 16, 2008, 10:23 PM

Hi
My card sb0090 (under windows) but after instaling kXAudioDriver-1.0b3 i have a sb0092.
but under EFI Studio my cart is see foto

By the way sound still has disctorction about a 5-10 min.

my spec
leo 10.5.4
cpu e6400
2 gb ram
asus p5k-e wifi /ap
gf 7600gt

xtraa · Aug 18, 2008, 02:50 AM

Hi

First: So many thanks for your hard work.

I have a Hackinosh and just plugged my E-MU 1212m in the PCI slot.

It shows up in the system prefs, but I have no output on my analog
outs. Wasn't able to check spdif etc. outputs yet.

At verbose bootup it detects all the possible channels, but it says
PCI does not match.

The version of my card is

Device ID: 0004
Vendor ID: 1102
Revision 3 (the one with built in Firewire, too)

Debug Stuff

- LSPCI detects it as a SB Audigy.
- System Profiler detects No Built in Audio
- System profiler detects Firewire on the Card, but it does not work (1102:4001)

- Kextstat tells me the driver is loaded

Code:

9    0 0x20d95000 0x3b000    0x3a000    com.kXProject.driver.kXAudioDriver (1.0b3) <68 17 12>

- PCI Vendor and Device is correct in the .plist

- Console shows this error message when Firewire is plugged in:

Code:

18.08.08 03:46:54 kernel !! kXAudioEngine[0x2fba000]:getCurrentSampleFrame(): should never happen [fffffc19 vs 12c0]

And it is looping this message, not sure if this is related:

Code:

18.08.08 03:34:41 com.apple.kdcmond[57] krb5kdc: failed to initialize sandbox: Cannot apply builtin profile `krb5kdc': Policy not found

My System specs are Leopard 10.5.4, EFI v8, Vanilla kernel (no hacks), Intel C2D and I dunno what ICH exactly.

Thanks for checking and keep up the good work

Cheers

themax · Aug 18, 2008, 11:48 AM

All fine in me 10.5.4 only similiar bugs of b2 , sound freeze....

Insphire · Aug 21, 2008, 01:46 PM

By the way, regarding the well known "noise", after inspecting a little some logs, i just noticed that this is what happens exactly some seconds before the sound becomes distorted:

Code:

8/21/08 9:42:58 AM kernel kXAudioEngine[0x3fb1000]::performAudioEngineStop() - 1 
8/21/08 9:42:58 AM kernel kXAudioEngine[0x3fb1000]::performAudioEngineStop: stop audio [0; 5555 0] 
8/21/08 9:42:58 AM kernel kXAudioEngine[0x3fb1000]::peformFormatChange(0x405dd00, 0x363a3bd8, 0) 
8/21/08 9:42:58 AM kernel kXAudioEngine[0x3fb1000]::performAudioEngineStart() - 0 
8/21/08 9:42:58 AM kernel kXAudioEngine[0x3fb1000]::performAudioEngineStart: start audio [0; 5555 0] 
8/21/08 9:43:28 AM kernel !! kXAudioEngine[0x3fb1000]:getCurrentSampleFrame(): should never happen [dc00 vs 12c0]

Im not sure if this is useful at all, because it looks to me like standard debug msgs, but in any case, here it is

Thanks for your work Eugene & co!

popeyeq · Aug 24, 2008, 11:10 AM

Hi, just want to ask. I use to have Linux before i find osx86. There is ALSA Dliver working under Linux. OSX and Linux are both unix base systems. Would be possible rebuild ALSA driver for OSX?

hi runing 1.0b3 driver on SB Audigy Platinum SB0090 10k2 [c400] same problems sound go bad after few minutes - SBLive_reset_workflow help to reload driver automaticly.

Applications wich not crashing when reload driver:
(Less then sec. no sound, but continue playing.)
iTunes, Quicktime,

Apps which crash: vlc

Multichannel - 5.1 surround:
L.Front / R.Front (1/2)
L.Rear / R.Rear (3/4)
Center / SW (5/6)

adjustable channels only 1, 2. At audio midi setup can hear all channels, when I press them. Surround sound works at all players.

**dj_stick** · Aug 24, 2008, 02:34 PM

Quote:

Originally Posted by popeyeq

Hi, just want to ask. I use to have Linux before i find osx86. There is ALSA Dliver working under Linux. OSX and Linux are both unix base systems. Would be possible rebuild ALSA driver for OSX?

be interesting to see if that's possible, but there may be some underlying extensions that could cause problems, but you have to remember, although they are both based on a similiar code, they are completely different operating systems after all

RIV@NVX · Aug 24, 2008, 04:11 PM

Quote:

Originally Posted by dj_stick

be interesting to see if that's possible, but there may be some underlying extensions that could cause problems, but you have to remember, although they are both based on a similiar code, they are completely different operating systems after all

No, ALSA is strictly Linux-only and doesn't work on other Unix-like OS-es (including FreeBSD, Solaris and OSX).
Maybe OSS can help you, not sure if that works on OSX.

popeyeq · Aug 26, 2008, 08:25 AM

Thanks, I see now it was a stupid question.

By the way. Fireware working bouth front and back port.

**Eugene Gavrilov** · Sep 2, 2008, 10:32 PM

Quote:

Originally Posted by Oxtie

1. Eugene, All sounds are "TOO CRISPY" as if people are blowing from their nose (SSSssssss@Peak & ChChchch@PeakDrop)
2. A Stereo (2.0) mp3 file only sounds on Channel 1, Channel 2 and Woofer (Not on Chan 3,4,5)
(Surrounded not enabled on default driver installation)
3. Front Left and Front Right OK! (default config) but other channels numbers assigned to wrong speakers
Audigy 2 ZS (035x) Pre-installed on Dell (not OEM built)
Front Center =/= 3
Sub Woofer =/= 4
Left Surrounded (Rear Left) =/= 5
Right Surrounded (Rear Right) =/= 6

Correct order,
Rear Left = 3
Rear Right = 4
Front Center = 5
Sub Woofer = 6

4. Like the previous release, under 48000 hz, 'M','3','4','5','6' is disabled.

1. Check if volume level set to lower value fixes the problem.
2. This is expected and will not be fixed unless I implement full DSP control (kX DSP clone for OS X).
3. I will update the mapping accordingly. Meanwhile, 'Audio and MIDI' applet will fix the problem (manual reassign).
4. ?.. do you mean volume controls? Volume is currently 'stereo-only', two channels, I will check if it is possible to make it system-wide.

E.

Oxtie · Sep 3, 2008, 12:56 PM

Quote:

Originally Posted by Eugene Gavrilov

1. Check if volume level set to lower value fixes the problem.
2. This is expected and will not be fixed unless I implement full DSP control (kX DSP clone for OS X).
3. I will update the mapping accordingly. Meanwhile, 'Audio and MIDI' applet will fix the problem (manual reassign).
4. ?.. do you mean volume controls? Volume is currently 'stereo-only', two channels, I will check if it is possible to make it system-wide.

E.

1. I can still hear sharp crispness on words sounding from "SxxSSsss" (with low volume). If you open iTunes, Equalizer, set all volumes to 0 except 16k then you may notice some sharpness (even with low volume)
2. dsp, i guess this is going to take a lot of work

3. yes, manual reassigning has solved it so far.
4. Yes volume controls. After selecting Multichannel (in speaker config), shouldn't all multichannel volumes suppose to be adjustable?

CptanPanic · Sep 4, 2008, 01:32 AM

Just wanted to say I am running 10.5.4 with a Soundblaster Live! Value card and it works great execpt I have the corrupted sound every five minutes. Cant wait till next release.
Thanks,
CP

spie · May 16, 2009, 04:02 PM

hi,i first reply is nonse. cause as below:

system say:
Hello spie,
Our records indicate that you have never posted to our site before! Why not make your first post today by saying hello to our community in our Off-topic forum.
you have never posted to our site before! Why not make your first post today by saying hello to our community in our Off-topic forum.

Aug 15, 2008, 03:25 PM	#1
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	1.0b3 driver bugs please report 1.0b3-specific issues and bugs here if you think the bug requires additional information or discussion, start a new topic and do only post a very brief description of the problem in this thread (as well as a link to your new topic) PLEASE do not post suggestions, ideas, 'thanks', 'how do I' questions here! E.

Aug 15, 2008, 09:26 PM	#2
Oxtie HardwareHeaven Lover Join Date: May 2008 Posts: 134 Rep Power: 0	1. Eugene, All sounds are "TOO CRISPY" as if people are blowing from their nose (SSSssssss@Peak & ChChchch@PeakDrop) 2. A Stereo (2.0) mp3 file only sounds on Channel 1, Channel 2 and Woofer (Not on Chan 3,4,5) (Surrounded not enabled on default driver installation) 3. Front Left and Front Right OK! (default config) but other channels numbers assigned to wrong speakers Audigy 2 ZS (035x) Pre-installed on Dell (not OEM built) Front Center =/= 3 Sub Woofer =/= 4 Left Surrounded (Rear Left) =/= 5 Right Surrounded (Rear Right) =/= 6 Correct order, Rear Left = 3 Rear Right = 4 Front Center = 5 Sub Woofer = 6 4. Like the previous release, under 48000 hz, 'M','3','4','5','6' is disabled. 5. Sound distortion, Temp work around here (Edit minutes in numbers at distortion start point) Any guys reading my issue here, please confirm these with your sound card model and post with your model name etc (Example: Audigy 2ZS kX SB035x 10k2 [d8c0]). If you have new issues, I will read and edit this post to confirm it. Last edited by Oxtie; Aug 18, 2008 at 02:04 PM.

Aug 16, 2008, 04:11 AM	#4
hquest DriverHeaven Newbie Join Date: Aug 2008 Posts: 4 Rep Power: 0	Same as from v1.0b2: Reporting working driver for analog outputs on an Audigy 2 ZS Platinum SB0350 EMU10k2 in both 5.1 sound config and (simultaneously) on frontal panel line output, on Mac OS X 10.5.4. As others reported, audio gets distorted after some time -- like about 4 mins playing -- but gets back normal in less than a minute if left playing (isn't driver running out of clock sync?). After this happens 3-4 times, sound is completely distorted, and a kextunload/kextload is mandatory. No remapping needed for speakers on Audio MIDI Setup. Quick edit: Audio MIDI Setup app reports output as 8ch-32bit -- wasn't it supposed to be 24-bit?) Last edited by hquest; Aug 16, 2008 at 04:22 AM.

Aug 16, 2008, 03:58 PM	#5
rokmc820 DriverHeaven Newbie Join Date: Aug 2008 Posts: 1 Rep Power: 0	Report Hi~ System info. OS : Leopard 10.5.4(Hackintosh) CPU : Q6600 2.4GHz@Quad core M/B : Asus P5K-E WiFi RAM : 4GB SOUND : SB0060 (e880) / Sound Blaster Live! 5.1 uhm... 2chanel only.. and noise..(SSSssssss chchchchchchch) Chanel select possible! but no changed. Good job. Last edited by rokmc820; Aug 17, 2008 at 12:52 PM.

Aug 16, 2008, 09:04 PM	#6
catboy DriverHeaven Newbie Join Date: Aug 2008 Posts: 5 Rep Power: 0	Hi all my card: Audigy 2 Zs: SB0350 10k2 [b400] Vendor: 0x1102 Device id: 0x0004 (7003 is game port ups..) OS: Leopard 10.5.4 intel Sound system format: 48000 hz 8ch-32bit !!!!!! the bugs is the same. but first time i get 20 min w/sound! with VLC player and digital output (i can't get AC3 output... ) Test in Reason: All channel connected but only 1 & 2 available so only Stereo Last edited by catboy; Aug 20, 2008 at 10:45 AM.

Aug 16, 2008, 01:47 AM	#3
nekton DriverHeaven Newbie Join Date: Aug 2008 Posts: 2 Rep Power: 0	Same here; Audigy works fine from back stereo but suddenly degrades at 9 minutes (Leopard 10.5.4). Great start and hope you can fix the time-related degrade. Gave me new hope for using my old Audigy—if you can fix this problem, I will definitely donate.

Aug 16, 2008, 10:23 PM	#7
existation DriverHeaven Newbie Join Date: Oct 2007 Posts: 8 Rep Power: 0	Hi My card sb0090 (under windows) but after instaling kXAudioDriver-1.0b3 i have a sb0092. but under EFI Studio my cart is see foto By the way sound still has disctorction about a 5-10 min. my spec leo 10.5.4 cpu e6400 2 gb ram asus p5k-e wifi /ap gf 7600gt

Aug 18, 2008, 02:50 AM	#8
xtraa HardwareHeaven Newbie Join Date: Aug 2008 Posts: 4 Rep Power: 0	Hi First: So many thanks for your hard work. I have a Hackinosh and just plugged my E-MU 1212m in the PCI slot. It shows up in the system prefs, but I have no output on my analog outs. Wasn't able to check spdif etc. outputs yet. At verbose bootup it detects all the possible channels, but it says PCI does not match. The version of my card is Device ID: 0004 Vendor ID: 1102 Revision 3 (the one with built in Firewire, too) Debug Stuff - LSPCI detects it as a SB Audigy. - System Profiler detects No Built in Audio - System profiler detects Firewire on the Card, but it does not work (1102:4001) - Kextstat tells me the driver is loaded Code: 9 0 0x20d95000 0x3b000 0x3a000 com.kXProject.driver.kXAudioDriver (1.0b3) <68 17 12> - PCI Vendor and Device is correct in the .plist - Console shows this error message when Firewire is plugged in: Code: 18.08.08 03:46:54 kernel !! kXAudioEngine[0x2fba000]:getCurrentSampleFrame(): should never happen [fffffc19 vs 12c0] And it is looping this message, not sure if this is related: Code: 18.08.08 03:34:41 com.apple.kdcmond[57] krb5kdc: failed to initialize sandbox: Cannot apply builtin profile `krb5kdc': Policy not found My System specs are Leopard 10.5.4, EFI v8, Vanilla kernel (no hacks), Intel C2D and I dunno what ICH exactly. Thanks for checking and keep up the good work Cheers

Aug 18, 2008, 11:48 AM	#9
themax HardwareHeaven Junior Member Join Date: Oct 2007 Posts: 23 Rep Power: 0	All fine in me 10.5.4 only similiar bugs of b2 , sound freeze....

Aug 24, 2008, 11:10 AM	#11
popeyeq DriverHeaven Newbie Join Date: Aug 2008 Posts: 3 Rep Power: 0	Hi, just want to ask. I use to have Linux before i find osx86. There is ALSA Dliver working under Linux. OSX and Linux are both unix base systems. Would be possible rebuild ALSA driver for OSX? hi runing 1.0b3 driver on SB Audigy Platinum SB0090 10k2 [c400] same problems sound go bad after few minutes - SBLive_reset_workflow help to reload driver automaticly. Applications wich not crashing when reload driver: (Less then sec. no sound, but continue playing.) iTunes, Quicktime, Apps which crash: vlc Multichannel - 5.1 surround: L.Front / R.Front (1/2) L.Rear / R.Rear (3/4) Center / SW (5/6) adjustable channels only 1, 2. At audio midi setup can hear all channels, when I press them. Surround sound works at all players. __________________ Hackintosh: Leopard 10.5.6 (9G55), Darwin 9.6.0, Chameleon v1.0.12 with PC EFI v9 Mobo: ASUS P5GC-MX/1333 + ICH7 CPU: Intel Core 2 Duo 1.8 GHz Memory: 2 x 1 GB DDR2 SDRAM Graphics: ATI Radeon X1650 PRO 512MB GDDR2 (Kozlowski way - with 0x71C7 dev ID - QE + Rotation) Audio: SoundBlaster Audigy Platinum 10k2 SB0090 [c400] (kXAudioDriver-1.2b1 Patch) - HD Audio S/PDIF 6 Channel (ALC 883 Patch) Wireless: Edimax WiFi USB (RT71W Ralink Driver) + Belkin WiFi USB (RT71W Ralink Driver) Last edited by popeyeq; Aug 24, 2008 at 11:16 AM.

Aug 26, 2008, 08:25 AM	#14
popeyeq DriverHeaven Newbie Join Date: Aug 2008 Posts: 3 Rep Power: 0	Thanks, I see now it was a stupid question. By the way. Fireware working bouth front and back port. __________________ Hackintosh: Leopard 10.5.6 (9G55), Darwin 9.6.0, Chameleon v1.0.12 with PC EFI v9 Mobo: ASUS P5GC-MX/1333 + ICH7 CPU: Intel Core 2 Duo 1.8 GHz Memory: 2 x 1 GB DDR2 SDRAM Graphics: ATI Radeon X1650 PRO 512MB GDDR2 (Kozlowski way - with 0x71C7 dev ID - QE + Rotation) Audio: SoundBlaster Audigy Platinum 10k2 SB0090 [c400] (kXAudioDriver-1.2b1 Patch) - HD Audio S/PDIF 6 Channel (ALC 883 Patch) Wireless: Edimax WiFi USB (RT71W Ralink Driver) + Belkin WiFi USB (RT71W Ralink Driver)

Sep 4, 2008, 01:32 AM	#17
CptanPanic DriverHeaven Newbie Join Date: Jul 2008 Posts: 2 Rep Power: 0	Just wanted to say I am running 10.5.4 with a Soundblaster Live! Value card and it works great execpt I have the corrupted sound every five minutes. Cant wait till next release. Thanks, CP

May 16, 2009, 04:02 PM	#18
spie DriverHeaven Newbie Join Date: Dec 2007 Posts: 1 Rep Power: 0	Re: 1.0b3 driver bugs hi,i first reply is nonse. cause as below: system say: Hello spie, Our records indicate that you have never posted to our site before! Why not make your first post today by saying hello to our community in our Off-topic forum. you have never posted to our site before! Why not make your first post today by saying hello to our community in our Off-topic forum.