bug reports for OS X driver 1.2b0

EVAtime · Nov 7, 2008, 06:34 AM

Quote:

Originally Posted by gooday

distortion after 1 minute or so on my SB0060, system is Leopard 10.5.5.

and the kx manager wouldn't show up ,it's just blank and nothing but a window.

I have the same problems. my system is 10.4.11.

l0v3r · Nov 7, 2008, 11:21 AM

Quote:

Originally Posted by gooday

and the kx manager wouldn't show up ,it's just blank and nothing but a window.

Quote:

Originally Posted by Eugene Gavrilov

* Added 'kX Manager' application (/Application/Utilities) which currently does nothing. Ignore it : )

It's so hard to read?

l0v3r

TheKezReturns · Nov 11, 2008, 06:10 AM

Great havin KX for my 1820m on a dual boot system but I hope you can fix the dock issue soon E.

I'll just describe what's happenning in my system in case it helps as the phenomenon is repeatable.

After powering off the system and turning it back on, the dock always comes on in christmas tree mode (all lights on). Reloading the firmware does nothing by itself, I have to reboot again and then it initializes properly. After subsequent soft reboots, the dock remains working.

So, when my computer has been turned off (or gone into sleep) I have to load windows once, reload firmware, then reboot, for the dock to initialize.

If I want to use it in osx, I have to boot into windows, reload firmware, reboot into windows and see that the dock is initalized, then reboot again into osx.
Sometimes the reboot into windows is not necessary.

If I try to run edpsctrl while the unit is in christmas tree mode, I get this.

<code>
==== E-mu E-DSP initialization
==== FPGA appears to be already programmed
==== Dock is not connected
==== Current E-DSP status
Card: 'EM8810 10k2 [1000]'
Options: 2 - Sync
Hana ID: 55
Versions: 3.4, 3.4, 3
Dock is Powered-On. [0x1]
WClock: 0 [Int 48]
Def clock: 48000
HANA is UnMuted
HANA IRQs: f
SPDIF mode [10]:
Out: Consumer
In: Consumer; Not Valid
Optical Type: [3] -- Input: ADAT, Output: ADAT
MIDI In: none, none [0]
MIDI Out: c
LEDs: 0 12 0
ADC pads: 0 -
DAC pads: 0 -
Dock misc: [0] DAC mute: 0000 headphones: 0
ADAT Unlocked
SPDIF Locked : 35617
BNC Locked : 15360
SPDIF Locked : 12000
reg 14-1f:[7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f]
reg 30-3f:[7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f]
</code>

mahhanan · Nov 11, 2008, 11:24 PM

I have leopard 10.5.5 kaliway and audigy 4 (sb0610) and kXManager run only a grey screen. I can choose 5.1. 6.1 7.1 and anothers. When I choose 5.1 or another model ever I have in ouput audio 8ch 32 bits. The mic is not detected, mic not run. The subwoofer is not separate of middle speaker.

With mic is a good solution. Please repair it an I will be very happy.

Thank you very much for yours job.

TheKezReturns · Nov 12, 2008, 12:14 AM

Addendum:

Cold booting into osx, the dock dosen't go into christmas tree mode and edspctrl loads the firmware and initializes the dock properly.

Quote:

kXManager run only a grey screen.

Posting in a thread without even reading at least reading the first and last few posts is just foolish. If you're that lazy, you don't deserve to be helped.

bobo1945 · Nov 12, 2008, 04:07 AM

Hi , i have tried this driver , but it appear not to work.I have a device kX SB0350 10k2 [df00] but it says it has no output control

System Leo4all V2
Processor :Athlon 64X2 4000+
Mobo:Gigabyte GA-MA69GM-S2H
Sound:M-Audio delta 1010LT PCI not functioning, so trying Audigy 2ZS
Graphic:Radeon Ati X1250 build in only 1024x768

Oxtie · Nov 12, 2008, 08:48 AM

Quote:

Originally Posted by TheKezReturns

Addendum:
Posting in a thread without even reading at least reading the first and last few posts is just foolish. If you're that lazy, you don't deserve to be helped.

This is pretty much the same thing everywhere... I guess dudes just want answers personally from an individual when they get kernel panic in their brain. I wonder where went E? didn't see any post or replies etc...

think he'z off to another vacation after that release or, threw his keyboard away after reading aweful replies

Quote:

Originally Posted by djsubject

witch ever one it is i hope hes having fun

I hope he get new GF (programmer)

when babies come out, cool releases!

djsubject · Nov 12, 2008, 11:39 AM

Quote:

Originally Posted by Oxtie

think he'z off to another vacation after that release or, threw his keyboard away after reading aweful replies

witch ever one it is i hope hes having fun

TheKezReturns · Nov 13, 2008, 01:59 AM

I reckon he'll be back without warning with KX manager and recording to go with the bug fixes. Getting that stuff up and running in osx would be a lot more rewarding than painstakingly tracing wierd bugs related to hardware he doesn't own.
Right E?

Man I love this project.
Hate windows, Love my 1820m.

And for those who cant wait for recording, try setting up an aggregate device and connect the spdif out from the EMU to spdif in on your mobo. That should let you use the EMU converters and a working input under in one device, provided the analogue in's can be routed to the spdif out. Can we do it in windows and reboot?

I wanted to do this but haven't tried as I found my new mobo doesn't have the spdiff headers.

**Eugene Gavrilov** · Nov 14, 2008, 12:06 AM

Kez,
If you boot after windows, you may wish to run 'edspctrl' with '-reset' or '-defaults' option.

Telemetry info:
I got 10k1-related telemetry data and confirmed the bug was with clocking.

Current status:
No progress at all. A lot of offline activities, kX-unrelated, a lot of work, etc..
Perhaps will have some time in the end of November to fix the following issues:

* kernel panics
* 10k1 distortions
* (perhaps?) recording

E.

gondor69 · Dec 31, 2008, 04:41 PM

Hello,
no problem with my audigy 2 ZS (notebook) on Vanilla kernel iatkos install i5 (toshiba laptop A100-090 TI pcmcia chip XX12) am I lucky or something????
Not perfect, but ok.
used it for quite a while even with core Audio settings, rerouted through Soundflowerbed, fine.
btw, supported this (for 12$ or so) because it really rules,
can't wait to use dsp features and the mic input of it.

Ready to beta test this intensively for help.

Regards and happy NY

G

Nov 11, 2008, 06:10 AM	#33
TheKezReturns HardwareHeaven Lover Join Date: Apr 2005 Location: Gold Coast Australia Posts: 118 Rep Power: 42	Re: bug reports for OS X driver 1.2b0 Great havin KX for my 1820m on a dual boot system but I hope you can fix the dock issue soon E. I'll just describe what's happenning in my system in case it helps as the phenomenon is repeatable. After powering off the system and turning it back on, the dock always comes on in christmas tree mode (all lights on). Reloading the firmware does nothing by itself, I have to reboot again and then it initializes properly. After subsequent soft reboots, the dock remains working. So, when my computer has been turned off (or gone into sleep) I have to load windows once, reload firmware, then reboot, for the dock to initialize. If I want to use it in osx, I have to boot into windows, reload firmware, reboot into windows and see that the dock is initalized, then reboot again into osx. Sometimes the reboot into windows is not necessary. If I try to run edpsctrl while the unit is in christmas tree mode, I get this. <code> ==== E-mu E-DSP initialization ==== FPGA appears to be already programmed ==== Dock is not connected ==== Current E-DSP status Card: 'EM8810 10k2 [1000]' Options: 2 - Sync Hana ID: 55 Versions: 3.4, 3.4, 3 Dock is Powered-On. [0x1] WClock: 0 [Int 48] Def clock: 48000 HANA is UnMuted HANA IRQs: f SPDIF mode [10]: Out: Consumer In: Consumer; Not Valid Optical Type: [3] -- Input: ADAT, Output: ADAT MIDI In: none, none [0] MIDI Out: c LEDs: 0 12 0 ADC pads: 0 - DAC pads: 0 - Dock misc: [0] DAC mute: 0000 headphones: 0 ADAT Unlocked SPDIF Locked : 35617 BNC Locked : 15360 SPDIF Locked : 12000 reg 14-1f:[7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] reg 30-3f:[7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] [7f] </code>

Nov 11, 2008, 11:24 PM	#34
mahhanan DriverHeaven Newbie Join Date: Nov 2008 Posts: 2 Rep Power: 0	Re: bug reports for OS X driver 1.2b0 I have leopard 10.5.5 kaliway and audigy 4 (sb0610) and kXManager run only a grey screen. I can choose 5.1. 6.1 7.1 and anothers. When I choose 5.1 or another model ever I have in ouput audio 8ch 32 bits. The mic is not detected, mic not run. The subwoofer is not separate of middle speaker. With mic is a good solution. Please repair it an I will be very happy. Thank you very much for yours job.

Nov 12, 2008, 04:07 AM	#36
bobo1945 DriverHeaven Newbie Join Date: Nov 2008 Posts: 1 Rep Power: 0	Re: bug reports for OS X driver 1.2b0 Hi , i have tried this driver , but it appear not to work.I have a device kX SB0350 10k2 [df00] but it says it has no output control System Leo4all V2 Processor :Athlon 64X2 4000+ Mobo:Gigabyte GA-MA69GM-S2H Sound:M-Audio delta 1010LT PCI not functioning, so trying Audigy 2ZS Graphic:Radeon Ati X1250 build in only 1024x768 Last edited by bobo1945; Nov 12, 2008 at 07:12 AM.

Nov 13, 2008, 01:59 AM	#39
TheKezReturns HardwareHeaven Lover Join Date: Apr 2005 Location: Gold Coast Australia Posts: 118 Rep Power: 42	Re: bug reports for OS X driver 1.2b0 I reckon he'll be back without warning with KX manager and recording to go with the bug fixes. Getting that stuff up and running in osx would be a lot more rewarding than painstakingly tracing wierd bugs related to hardware he doesn't own. Right E? Man I love this project. Hate windows, Love my 1820m. And for those who cant wait for recording, try setting up an aggregate device and connect the spdif out from the EMU to spdif in on your mobo. That should let you use the EMU converters and a working input under in one device, provided the analogue in's can be routed to the spdif out. Can we do it in windows and reboot? I wanted to do this but haven't tried as I found my new mobo doesn't have the spdiff headers. Last edited by TheKezReturns; Nov 13, 2008 at 02:05 AM.

Nov 14, 2008, 12:06 AM	Thread Starter #40
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	Îòâåò: bug reports for OS X driver 1.2b0 Kez, If you boot after windows, you may wish to run 'edspctrl' with '-reset' or '-defaults' option. Telemetry info: I got 10k1-related telemetry data and confirmed the bug was with clocking. Current status: No progress at all. A lot of offline activities, kX-unrelated, a lot of work, etc.. Perhaps will have some time in the end of November to fix the following issues: * kernel panics * 10k1 distortions * (perhaps?) recording E.

Dec 31, 2008, 04:41 PM	#41
gondor69 DriverHeaven Newbie Join Date: Dec 2008 Posts: 3 Rep Power: 0	Re: bug reports for OS X driver 1.2b0 Hello, no problem with my audigy 2 ZS (notebook) on Vanilla kernel iatkos install i5 (toshiba laptop A100-090 TI pcmcia chip XX12) am I lucky or something???? Not perfect, but ok. used it for quite a while even with core Audio settings, rerouted through Soundflowerbed, fine. btw, supported this (for 12$ or so) because it really rules, can't wait to use dsp features and the mic input of it. Ready to beta test this intensively for help. Regards and happy NY G