Omega Driver Problems on my MobilityX600

Immunis · Jul 16, 2006, 10:29 AM

I recently installed Omega 3.8.252 on my 3.4 Ghz Intel Pentium 4, 1 GB Ram, X600 Mobility Radeon laptop. It runs games on my 1440 x 900 (Widescreen) display really well so long as the display game settings are at 1440 x 900. However, when I attempt to play games on full screen at any resolution lower (eg 1024x768 or 800 x 600) the screen goes completely black and white slowly filters past like a wave. I went into the omega setings and changed it to "Expand while mainting aspect ration" and this solved a lot of the game problems. However, when i run BF2 now no matter what i do I get that crazy screen. Can someone help me fix this problem? Should I re-install omega or do something else? Any help would be hugely appreciated.

Pic1
Pic2

Vid1 (6 MB, 30 Seconds)

Immunis · Jul 17, 2006, 01:46 AM

Can anyone help me plz?....Did i post this in the wrong section or something? ... I dunno where else to go...this is the only forumn the Omega Drivers site pointed me to....

kn00tcn · Jul 17, 2006, 09:03 AM

what wallpaper is that? hehe

did any other drivers.. or versions do this? what about a BF2 forum if other games got fixed but not this one

swimtech · Jul 18, 2006, 01:41 AM

It's fairly important to have the latest chipset drivers installed for your mainboard. Have you tried getting the latest motherboard chipset drivers from manufacturer of your laptop specifically for your model and installing them?

cemosabi · Jan 27, 2007, 04:58 PM

I have the exact same problem. Except my issue starts in the lower left hand part of the screen. I also get a "plad like" pattern on my screen sometimes.

I have Gateway 7510GX with AMD 64 3700+, 1 gig mem, ATI Mobility 600x, 100 gb HD

Dyre Straits · Jan 28, 2007, 10:48 AM

Quote:

Originally Posted by cemosabi

I have the exact same problem. Except my issue starts in the lower left hand part of the screen. I also get a "plad like" pattern on my screen sometimes.

I have Gateway 7510GX with AMD 64 3700+, 1 gig mem, ATI Mobility 600x, 100 gb HD

I'm not at all familiar with this problem. So, bear with me while I suggest something to try. It 'almost' looks like an overheating issue but not quite. So, to rule out any overheating, take the laptop and place it onto something like a baking rack. Make sure there's a good airflow beneath it even if you have to take a small fan to do so.

Once you have things set up with this airflow going beneath the laptop, see if the problem repeats. Of course, if it does, it means either, there is no overheating problem OR there's still not enough airflow.

So, see if you can create enough sufficient airflow to eliminate the problem or at least determine whether it's an overheating situation or not.

Good luck!

Jul 16, 2006, 10:29 AM	#1
Immunis DriverHeaven Newbie Join Date: Jul 2006 Posts: 8 Rep Power: 0	Omega Driver Problems on my MobilityX600 I recently installed Omega 3.8.252 on my 3.4 Ghz Intel Pentium 4, 1 GB Ram, X600 Mobility Radeon laptop. It runs games on my 1440 x 900 (Widescreen) display really well so long as the display game settings are at 1440 x 900. However, when I attempt to play games on full screen at any resolution lower (eg 1024x768 or 800 x 600) the screen goes completely black and white slowly filters past like a wave. I went into the omega setings and changed it to "Expand while mainting aspect ration" and this solved a lot of the game problems. However, when i run BF2 now no matter what i do I get that crazy screen. Can someone help me fix this problem? Should I re-install omega or do something else? Any help would be hugely appreciated. Pic1 Pic2 Vid1 (6 MB, 30 Seconds) Last edited by Immunis; Jul 16, 2006 at 11:05 AM.

Jul 17, 2006, 09:03 AM	#3
kn00tcn DriverHeaven Senior Member Join Date: Jun 2006 Location: Toronto Posts: 649 Rep Power: 0 System Specs	what wallpaper is that? hehe did any other drivers.. or versions do this? what about a BF2 forum if other games got fixed but not this one __________________ http://www.kn00tcn.net/site/ati-catalyst-profiles/ http://www.kn00tcn.net/FPSLimiter.rar

Jul 18, 2006, 01:41 AM	#4
swimtech HardwareHeaven Extreme Member Join Date: May 2002 Location: North Carolina Posts: 4,040 Rep Power: 124 System Specs	It's fairly important to have the latest chipset drivers installed for your mainboard. Have you tried getting the latest motherboard chipset drivers from manufacturer of your laptop specifically for your model and installing them? __________________ It's not so much getting your way that matters or not - what matters is how you go about getting it.

Jul 17, 2006, 01:46 AM	Thread Starter #2
Immunis DriverHeaven Newbie Join Date: Jul 2006 Posts: 8 Rep Power: 0	Can anyone help me plz?....Did i post this in the wrong section or something? ... I dunno where else to go...this is the only forumn the Omega Drivers site pointed me to....

Jan 27, 2007, 04:58 PM	#5
cemosabi DriverHeaven Newbie Join Date: Jan 2007 Posts: 1 Rep Power: 0	I have the exact same problem. Except my issue starts in the lower left hand part of the screen. I also get a "plad like" pattern on my screen sometimes. I have Gateway 7510GX with AMD 64 3700+, 1 gig mem, ATI Mobility 600x, 100 gb HD