Color problems

kokigfc · Sep 1, 2006, 10:37 PM

Hi guys,

I bought two days ago an Acer Aspire 5672 with X1600, i cleaned up the installation with a fresh win xp pro install. Later, downloded the rad_w2kxp_omega_38273_7z driver on the offical website.

The problem is i noticed the colors are not been displayed correctly. The yellow is orange, the blue is like white.

It can be a driver problem? Or an LCD problem? Or maybe an config issue?

Thanks

Randomness · Sep 2, 2006, 05:17 AM

Hello:

Assuming the color issue wasn't present when you first bought it, it is likely that the problem is with the color ratio settings.
You can usually change them in the ATi / Omega Control panel under the "Color" tab
You can access these settings my going to "Display" in Control Panel, clicking on the "Settings" tab, clicking "Advanced", and navigating to the "Color" Tab.

If you are using a form of Catalyst Control Panel, you would find the Color management settings there.

If all else fails, unistall the Omega drivers, and install the original notebook drivers first, and thanupdate to the Omega drivers.

I would recommend using "DriverCleaner Pro" to clean up your system after uninstalling the drivers through the "Add/Remove" programs applet in Control Panel.

Good luck, and take care.

- Randomness

Sep 1, 2006, 10:37 PM	#1
kokigfc DriverHeaven Newbie Join Date: Sep 2006 Posts: 1 Rep Power: 0	Color problems Hi guys, I bought two days ago an Acer Aspire 5672 with X1600, i cleaned up the installation with a fresh win xp pro install. Later, downloded the rad_w2kxp_omega_38273_7z driver on the offical website. The problem is i noticed the colors are not been displayed correctly. The yellow is orange, the blue is like white. It can be a driver problem? Or an LCD problem? Or maybe an config issue? Thanks

Sep 2, 2006, 05:17 AM	#2
Randomness in a state of flux Join Date: Dec 2005 Location: Canada Posts: 366 Rep Power: 0 System Specs	Hello: Assuming the color issue wasn't present when you first bought it, it is likely that the problem is with the color ratio settings. You can usually change them in the ATi / Omega Control panel under the "Color" tab You can access these settings my going to "Display" in Control Panel, clicking on the "Settings" tab, clicking "Advanced", and navigating to the "Color" Tab. If you are using a form of Catalyst Control Panel, you would find the Color management settings there. If all else fails, unistall the Omega drivers, and install the original notebook drivers first, and thanupdate to the Omega drivers. I would recommend using "DriverCleaner Pro" to clean up your system after uninstalling the drivers through the "Add/Remove" programs applet in Control Panel. Good luck, and take care. - Randomness