mobility x600 drivers/ATITool issue

idiotbox37 · Oct 14, 2006, 01:59 AM

i have a gateway mx7525 (mobile athlon64 4000+ w/ mobility x600). i d/led and installed ATITool in an attempt to squeeze a little more fps out of my gpu. when i ran it, it didn't display the right core/mem clock speeds (it had 0.0 for both). i clicked the fastest core button and the software froze after a few seconds. I'm thinking it's an issue w/ the stock gateway drivers for the mobility x600. i know gateway doesn't work w/ ati to produce drivers so i was wondering if there was another possible solution (omega, mobility modders, etc.) instead of trying all the different drivers and possibly hosing my laptop, i thought i'd make my first post on the boards and see if you guys could point me in the right direction. i did a search and didn't see anyone w/ the same problem i have. thanks for any info you guys can hook me up w/. thanks!

RaveneR · Oct 14, 2006, 03:26 AM

omega drivers should be safe enough to use on your gateway comp, but just to let you know, if you are using a mobile laptop, dont overclock your things. The extra heat that is generated might not be able to be handled by the stock fan.

idiotbox37 · Oct 14, 2006, 05:13 PM

yeah, i know about the heat issue. it gets decent fps in the games i play, i was just thinking that w/ preformance optimized drivers (stock drivers are most likely power optimized) and a slight boost in clock/mem speed (maybe up to 450/350) i could squeeze out a few extra frames when the action gets more intense.

i rarely use my laptop w/o the power adapter, so the loss in battery life isn't an issue to me. if i get any heat issue i'll reduce the clock speed but i just wana try it out.

is there a specific version of the omega drivers that i should try first?

RaveneR · Oct 19, 2006, 04:12 PM

just get the latest driver will do...

Oct 14, 2006, 01:59 AM	#1
idiotbox37 DriverHeaven Newbie Join Date: Oct 2006 Posts: 2 Rep Power: 0	mobility x600 drivers/ATITool issue i have a gateway mx7525 (mobile athlon64 4000+ w/ mobility x600). i d/led and installed ATITool in an attempt to squeeze a little more fps out of my gpu. when i ran it, it didn't display the right core/mem clock speeds (it had 0.0 for both). i clicked the fastest core button and the software froze after a few seconds. I'm thinking it's an issue w/ the stock gateway drivers for the mobility x600. i know gateway doesn't work w/ ati to produce drivers so i was wondering if there was another possible solution (omega, mobility modders, etc.) instead of trying all the different drivers and possibly hosing my laptop, i thought i'd make my first post on the boards and see if you guys could point me in the right direction. i did a search and didn't see anyone w/ the same problem i have. thanks for any info you guys can hook me up w/. thanks!

Oct 14, 2006, 03:26 AM	#2
RaveneR DriverHeaven Lover Join Date: Jun 2006 Location: Singapore Posts: 196 Rep Power: 0	omega drivers should be safe enough to use on your gateway comp, but just to let you know, if you are using a mobile laptop, dont overclock your things. The extra heat that is generated might not be able to be handled by the stock fan.

Oct 14, 2006, 05:13 PM	Thread Starter #3
idiotbox37 DriverHeaven Newbie Join Date: Oct 2006 Posts: 2 Rep Power: 0	yeah, i know about the heat issue. it gets decent fps in the games i play, i was just thinking that w/ preformance optimized drivers (stock drivers are most likely power optimized) and a slight boost in clock/mem speed (maybe up to 450/350) i could squeeze out a few extra frames when the action gets more intense. i rarely use my laptop w/o the power adapter, so the loss in battery life isn't an issue to me. if i get any heat issue i'll reduce the clock speed but i just wana try it out. is there a specific version of the omega drivers that i should try first?

Oct 19, 2006, 04:12 PM	#4
RaveneR DriverHeaven Lover Join Date: Jun 2006 Location: Singapore Posts: 196 Rep Power: 0	just get the latest driver will do...