|
|||||||
| Mobility Radeon Drivers and Support Discuss all matters relating to ATI mobility drivers and hardware. |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Newbie
Join Date: May 2007
Posts: 1
Rep Power: 0 ![]() |
Hello,
I've actually been searching and reading the forums for a long time before I registered. It's good to know there are more help here than some of the "official" forums I've seem. Anyways, like many of the others, I have an old HP Pavilion ZE5170 laptop stashed on my desk for a while. I was trying to fiddle with the graphics and driver, trying to get it to run as best as it could in World of Warcraft. I've read every post in the EPIC thread and have found several posts that is similar to the isue I have. Particularly from SinR and cru concerning the comp halting and graphics becoming distorted (in various Outland places: Underbog, Tempest Keep, some parts of Netherstorm, forcing me to reset the comp. I've use Radeon Omega Drivers 3.8.252 (Catalyst 6.5) when the issue occurred. Since then, I had wipe my comp clean and reinstalled everything. I currently used the Catalyst 6.4 (6-4_xp-2k_dd_ccc_wdm_enu_31959) obtained from this site and modded it with ModToolV4. I haven't tested it out on WoW yet and would like to get some idea wheher I got the correct driver for my comp. Before the release of Burning Crusades, my laptop with the Omega modded driver worked fine. I am in the process to ordering a new comp since this one is practically obsolete in gaming standards. However, I would like to see it still hang in there, at least with WoW. My DxDiag and MSInfo is below: DxDiag: ------------------ System Information ------------------ Time of this report: 5/23/2007, 20:44:44 Machine name: OGRIMMAR Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254) Language: English (Regional Setting: English) System Manufacturer: Hewlett-Packard System Model: HP Pavilion Notebook PC BIOS: PhoenixBIOS 4.0 Release 6.0 Processor: Intel(R) Pentium(R) 4 CPU 2.00GHz Memory: 510MB RAM Page File: 276MB used, 973MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.2600.2180 32bit Unicode ------------ DxDiag Notes ------------ DirectX Files Tab: No problems found. Display Tab 1: The file ati2dvag.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Music Tab: No problems found. Input Tab: No problems found. Network Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (n/a) DirectDraw: 0/4 (retail) DirectInput: 0/5 (n/a) DirectMusic: 0/5 (n/a) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: ATI MOBILITY RADEON Manufacturer: ATI Technologies Inc. Chip type: ATI MOBILITY RADEON AGP (0x4C59) DAC type: Internal DAC(350MHz) Device Key: Enum\PCI\VEN_1002&DEV_4C59&SUBSYS_0029103C&REV_00 Display Memory: 32.0 MB Current Mode: 1024 x 768 (32 bit) (60Hz) Monitor: Default Monitor Monitor Max Res: Driver Name: ati2dvag.dll Driver Version: 6.14.0010.6606 (English) DDI Version: 9 (or higher) Driver Attributes: Final Retail Driver Date/Size: 3/21/2006 23:56:42, 257536 bytes WHQL Logo'd: No WHQL Date Stamp: None VDD: n/a Mini VDD: ati2mtag.sys Mini VDD Date: 3/21/2006 23:56:22, 1522688 bytes Device Identifier: {D7B71EE2-0F19-11CF-426A-2320A1C2CB35} Vendor ID: 0x1002 Device ID: 0x4C59 SubSys ID: 0x0029103C Revision ID: 0x0000 Revision ID: 0x0000 Video Accel: ModeMPEG2_C ModeMPEG2_D Deinterlace Caps: {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBLineReplicate {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBLineReplicate {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch Registry: OK DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled DDraw Test Result: All tests were successful. D3D7 Test Result: All tests were successful. D3D8 Test Result: All tests were successful. D3D9 Test Result: All tests were successful. MSInfo: System Information report written at: 05/23/07 20:57:07 System Name: OGRIMMAR [System Summary] Item Value OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 2 Build 2600 OS Manufacturer Microsoft Corporation System Name OGRIMMAR System Manufacturer Hewlett-Packard System Model HP Pavilion Notebook PC System Type X86-based PC Processor x86 Family 15 Model 2 Stepping 4 GenuineIntel ~2000 Mhz BIOS Version/Date Phoenix Technologies Ltd. KD.M1.60, 9/19/2002 SMBIOS Version 2.3 Windows Directory C:\WINDOWS System Directory C:\WINDOWS\system32 Boot Device \Device\HarddiskVolume1 Locale United States Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)" User Name OGRIMMAR\Wei Time Zone Eastern Daylight Time Total Physical Memory 768.00 MB Available Physical Memory 292.50 MB Total Virtual Memory 2.00 GB Available Virtual Memory 1.96 GB Page File Space 1.22 GB Page File C:\pagefile.sys I have read alot of posts in this forum and is rather confused what applies to me, and which driver I should use. 5.13b, 6.11, 6.4, 6.5. Furthermore, I am unsure what applies for the ATI Radeon M6 on this comp. I know the comp sucks and I will be getting the new Asus G2S once it's availble. Will one of you Gurus be able to lend me some wisdom and give some life to this old notebook? Thanks in advance!
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|