mcdeezy

Hey everyone I just installed the omega drivers on my Evo N600c Compaq laptop. The reason I installed them is becuase I play world of warcraft on here and the outdoor terrains are all stretched and scrambled. I heard the omega drivers could fix that so I installed them. Now when I double click wow it says it cannot find a suitable display device and it closes. Also when I go into Dxdiag it tells me 3D Acceleration is unavailable. I don't know why but the drivers seem fine. I went to the advanced settings in display properties and I went to troubleshoot and the acceleration is on Full. Here is display dxdiag



------------------
System Information
------------------
Time of this report: 7/9/2007, 09:07:40
Machine name: SCOTTS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: English (Regional Setting: English)
System Manufacturer: Compaq
System Model: Evo N600c
BIOS: EPP runtime BIOS - Version 1.1
Processor: Intel(R) Pentium(R) III Mobile CPU 1066MHz
Memory: 256MB RAM
Page File: 251MB used, 366MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode


---------------
Display Devices
---------------
Card name: ATI MOBILITY RADEON (Omega 3.8.360)
Manufacturer: ATI Technologies Inc. (Omega 3.8.360)
Chip type: ATI Radeon Graphics Processor AGP (0x4C59)
DAC type: Internal DAC(350MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4C59&SUBSYS_B1110E11&REV_00
Display Memory: n/a
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Generic Television
Monitor Max Res: 640,480
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6683 (English)
DDI Version: unknown
Driver Attributes: Final Retail
Driver Date/Size: 3/14/2007 20:57:34, 267776 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 3/14/2007 20:57:15, 1986560 bytes
Device Identifier: {D7B71EE2-0F19-11CF-BA77-1B91A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4C59
SubSys ID: 0xB1110E11
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

Anyone know how to get wow correct and running again?


You can IM on aim at oMcdeezyo or MSN scottmc529@hotmail.com
Thanks in advanced.

niceguyrichy

bumpety bump

anybody any clues?
he's still having problems. in Run > dxdiag, it shows direct3d accel as not available

__________________

Ziolo

got the same problem

Vikingod

I'm going to assume that, based on the age of your equipment, you have a graphics card older than the radeon 9600. If that is the case, you must use either the Cat 6.5's or older, or the 6.11's (all modded with the mobility modder). I would suggest trying the Omega's based on the 6.5's.

You should post your system specs or add them to your profile for better support.