ABIT NF7 Series BIOS 1.7 Official

DriveEuro · Apr 18, 2003, 04:11 PM

BIOS ID: 1.7
BIOS Compile Date: 3/27/2003
Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package.

Change the write-protection mechanism of Flash ROM programming.

Support Thorton, Throughbred, Barton 2600+ CPU.

The default value on DRAM Ration changes to "Auto".

Added "CPU Disconnect Function"option on chipset to turn on/off C1 disconnect.

The CPU frequency 1917Mhz revised to 1916MHz.
DMI Pool data shows to"socket A".

The default value of "Memory Timing" revises to "Optimal".

Fix the problem that system can not detect USB Device under WinME while resume from S3,S4 mode, and lead to usb connector failed.

Fix system can not show fan speed in PC Health Status while using lower speed FAN.

Add "IDE Bus Master" function to improve transfer speed of GHOST, and default value set up to disabled.

Fix the problem while disabled"IDE Controller", and truned off IDE Controller, it would fail to share IRQ 14, 15;thus, IDE Controller would NOT be turned off, it would show "IDE Controller"IRQ to be "NA" in PCI list.

Provides "AGP aperture size" option for NF7-M, while use on chip VGA.

BIOS compile date: 3/27/2003.

Get it here

PS. This bios basically eliminates the bios corruption issues.

Apr 18, 2003, 04:11 PM	#1
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	ABIT NF7 Series BIOS 1.7 Official BIOS ID: 1.7 BIOS Compile Date: 3/27/2003 Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package. Change the write-protection mechanism of Flash ROM programming. Support Thorton, Throughbred, Barton 2600+ CPU. The default value on DRAM Ration changes to "Auto". Added "CPU Disconnect Function"option on chipset to turn on/off C1 disconnect. The CPU frequency 1917Mhz revised to 1916MHz. DMI Pool data shows to"socket A". The default value of "Memory Timing" revises to "Optimal". Fix the problem that system can not detect USB Device under WinME while resume from S3,S4 mode, and lead to usb connector failed. Fix system can not show fan speed in PC Health Status while using lower speed FAN. Add "IDE Bus Master" function to improve transfer speed of GHOST, and default value set up to disabled. Fix the problem while disabled"IDE Controller", and truned off IDE Controller, it would fail to share IRQ 14, 15;thus, IDE Controller would NOT be turned off, it would show "IDE Controller"IRQ to be "NA" in PCI list. Provides "AGP aperture size" option for NF7-M, while use on chip VGA. BIOS compile date: 3/27/2003. Get it here PS. This bios basically eliminates the bios corruption issues. __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024