Scsi

Saint_K · May 12, 2003, 07:09 PM

Hello,
First of all, i got no idea where to post this, but it seems to me there is no forum for all other hardware (or is this the place?)

Anyway, i got an SCSI adapter in my comp. with a CDRW connected on it! Now i dont know anything from SCSI, but i DO know that the card issnt configd. good!
Because when i config it to one way, windows add's like 10 cdrw's to my computer

And if i config it the other way, windows wont even boot at all... etc etc..

Now its a Old Adaptect AHA-2940/AHA-2940W scsi card, and the CDRW is a Plextor PlexWriter 4x2x20 ...

If you want to know anything more, please post it and ill look it up!

Hope some one can help me!

Greetz

BONEHEAD · May 12, 2003, 07:26 PM

Well make sure you have it set on a id 1-6 not 7. 7 is for the card also make sure you have your cdrom termanated. If this is the only device you have then set your cdrom to zero and make sure you have it termanated.

Scsi cards rarley die. also when booting your comp does it list any errors from the scsi card and does it list the cdrom.

Saint_K · May 12, 2003, 07:28 PM

Its set on 0, its only device, and 7 is set for the card.... So that is ok, but what means "termanated" ?

BONEHEAD · May 12, 2003, 07:34 PM

on the back of your cdrom ar jumpers 3 sets are for id's 1 set is block size (used for unix I think) 1 is test mode and 1 is for termenation. Basically you are telling the controller this is the last device. Upon bootting your computer the 2940 card should not give any errors if you have it term. you should see
crtl-a for setup
0 Plex xxxx
etc.
If it is not term. it will say insufficaint term on internal well I forget the rest of it.
http://www.plextor.com/english/suppo...s/man_4220.zip also check this out this is your manual.

Saint_K · May 12, 2003, 07:39 PM

jumpers are set on "term" and "PRTY", when i connect it like this, boot shows me " Press CTRL A etc etc" Then next line *SCSI ID:LUN NUMBER # :# 0:0 -Plextor CD-R PX-W4220T, Also when i boot, and i have my cd closed, it takes long time till pc will boot! When opend, it go much faster...

*edit*

After second line comes NO SCSI BOOT DEVICE FOUND

BIOS not installed!!!!!

What it means?

Saint_K · May 12, 2003, 07:40 PM

Going to check the manual now...

BONEHEAD · May 12, 2003, 07:44 PM

might try installing aspi for windows. Adaptec.com. Was this working correctly before? What os? If other than XP you should dl new drivers for your card also.

1 I would go into the bios of the contrler and set it to default save changes reboot then go back into the controller and dissable bios.
2 I have had problems in the past w/ Asus boards and scsi not a good combo.

Saint_K · May 12, 2003, 08:11 PM

I am running Win2k Server on the machine, the card and cdrw are from an older system, there it worked, but i cannot remember what the config was! And can you maybe tell me what option i am looking for to disable the bios?

Saint_K · May 12, 2003, 08:15 PM

I have there:
Host Adapter BIOS (config util Reserves BIOS space): Enable
Support removable disk under bios ficex disk: Boot only
Extended BIOS Translation for DOS Drives > ! Gbyte: Enabled
Display CTRL-A Message During BIOS Initialization: Enabled
Multiple Lun Support : Disable
Bios Support for bootable cd: Enable
Bios Support for Int13 Extensions: Enabled

BONEHEAD · May 12, 2003, 08:17 PM

here ya go I have to go get the kids from school if ya can't figure out i will help later on.
http://www.adaptec.com/worldwide/sup...uppedindexprod
I must say this is driving me crazy as i have never had this type of problem before. Indeed very weird

Saint_K · May 12, 2003, 08:19 PM

ok, many many tnx for so far! i go try see what i can find in this manual!

BONEHEAD · May 12, 2003, 08:24 PM

Just rememberd check all of your pins and check your cable if 1 pin is not making contact it will not work correctley This I do know. Scsi cables are very delicate. Internal cables are 4-15 dollars so not that big of a deal. I just had to replace my cable for my cdroms I scraped it on my case while cleaning the dust out and none of my cdroms would work very well kept getting erros then I check the cable. Just giving ya som ideas.

Saint_K · May 12, 2003, 09:01 PM

I did everything, read manuals, update drivers, update firmware from my CDRW, and still not work good, but when i boot windows it gives me the message "at least 1 drive failed during start up" But i do see the CDRW in the hardware tab. and at my computer is also and extra cd drive, but i cannot acces my comp. when i have the cdrw closed, when i open it it starts load my comp.... Any suggestions?

BONEHEAD · May 12, 2003, 09:10 PM

Ok another Idea if it's a 2940uw flash your Bios http://www.adaptec.com/worldwide/sup...y=afuv220.exe. I installed one for a freind on a XP machine and in order for it to work correctley i had to flash the Bios. Ok so I noticed you said 2940w there is an updated ver for that also http://www.adaptec.com/worldwide/sup...y=2940v116.exe
It sounds like you have done evcery thing correctly.
Dangit you cannot flash 2940w unless you have equipment.

Saint_K · May 12, 2003, 09:17 PM

Yeah i've downloaded this too, but i dont understand how to do this, when i unzip it, there are 2 files, 1 .txt the other .hex...
And the text file say's:

README.TXT for 2940v116.EXE
************************************************** ***************************

8BIOS32.HEX is intended for users of the Adaptec AHA-2940, and requires EPROM
Programmer equipment. If you do not have access to this type of equipment,
you will not be able to program your own EPROMs. If you feel that your
hardware problems require an update of the AHA-2940 firmware, please consult
with Technical Support on this issue.

And i dont understand this

BONEHEAD · May 12, 2003, 09:23 PM

Quote:

Originally posted by Saint_K
Yeah i've downloaded this too, but i dont understand how to do this, when i unzip it, there are 2 files, 1 .txt the other .hex...
And the text file say's:

README.TXT for 2940v116.EXE
************************************************** ***************************

8BIOS32.HEX is intended for users of the Adaptec AHA-2940, and requires EPROM
Programmer equipment. If you do not have access to this type of equipment,
you will not be able to program your own EPROMs. If you feel that your
hardware problems require an update of the AHA-2940 firmware, please consult
with Technical Support on this issue.

And i dont understand this

Yeah I just noteced you need a eprom programing machine.
well let's see now windows reco drive but only when it's open. can you put a cdrom in after booting and access it?

Saint_K · May 12, 2003, 09:34 PM

nope, it wont open My computer, only when i open the cd drive it opens...

BONEHEAD · May 12, 2003, 09:45 PM

Well short of installing card and cdrom in another "test" computer I would disconnectmy ide cdrom's an try booting. If you have Agp vid card make sure scsi is at least in pci slot 2 if pci vid card vid card should be in slot 1 On board vid scsi does not mater. Also check to see if card is seated properly. If all is ok i still think it is the cable seen it to many times.

Saint_K · May 12, 2003, 09:48 PM

Did all what you did, also tried a other cable also doesnt work

I guess this is last we could try?

BONEHEAD · May 12, 2003, 09:53 PM

Well sorry did'nt fix it. I have a goodwill computer store in my town that sells used parts really cheap if you got a place like that pick up another controller. I still think the cdrw still works. this is the hardest scsi problem i've ever had.

Saint_K · May 12, 2003, 09:58 PM

Hmmm i think the CDRW issnt worth it so much to buy a new controller! But many thanks for the help!

BONEHEAD · May 12, 2003, 10:02 PM

Not a problem.

May 12, 2003, 07:09 PM	#1
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	Scsi Hello, First of all, i got no idea where to post this, but it seems to me there is no forum for all other hardware (or is this the place?) Anyway, i got an SCSI adapter in my comp. with a CDRW connected on it! Now i dont know anything from SCSI, but i DO know that the card issnt configd. good! Because when i config it to one way, windows add's like 10 cdrw's to my computer And if i config it the other way, windows wont even boot at all... etc etc.. Now its a Old Adaptect AHA-2940/AHA-2940W scsi card, and the CDRW is a Plextor PlexWriter 4x2x20 ... If you want to know anything more, please post it and ill look it up! Hope some one can help me! Greetz

May 12, 2003, 07:26 PM	#2
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	Well make sure you have it set on a id 1-6 not 7. 7 is for the card also make sure you have your cdrom termanated. If this is the only device you have then set your cdrom to zero and make sure you have it termanated. Scsi cards rarley die. also when booting your comp does it list any errors from the scsi card and does it list the cdrom. __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR]

May 12, 2003, 07:34 PM	#4
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	on the back of your cdrom ar jumpers 3 sets are for id's 1 set is block size (used for unix I think) 1 is test mode and 1 is for termenation. Basically you are telling the controller this is the last device. Upon bootting your computer the 2940 card should not give any errors if you have it term. you should see crtl-a for setup 0 Plex xxxx etc. If it is not term. it will say insufficaint term on internal well I forget the rest of it. http://www.plextor.com/english/suppo...s/man_4220.zip also check this out this is your manual. __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR]

May 12, 2003, 07:44 PM	#7
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	might try installing aspi for windows. Adaptec.com. Was this working correctly before? What os? If other than XP you should dl new drivers for your card also. 1 I would go into the bios of the contrler and set it to default save changes reboot then go back into the controller and dissable bios. 2 I have had problems in the past w/ Asus boards and scsi not a good combo. __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR] Last edited by BONEHEAD; May 12, 2003 at 07:50 PM.

May 12, 2003, 08:17 PM	#10
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	here ya go I have to go get the kids from school if ya can't figure out i will help later on. http://www.adaptec.com/worldwide/sup...uppedindexprod I must say this is driving me crazy as i have never had this type of problem before. Indeed very weird __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR]

May 12, 2003, 07:28 PM	Thread Starter #3
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	Its set on 0, its only device, and 7 is set for the card.... So that is ok, but what means "termanated" ?

May 12, 2003, 07:39 PM	Thread Starter #5
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	jumpers are set on "term" and "PRTY", when i connect it like this, boot shows me " Press CTRL A etc etc" Then next line SCSI ID:LUN NUMBER # :# 0:0 -Plextor CD-R PX-W4220T, Also when i boot, and i have my cd closed, it takes long time till pc will boot! When opend, it go much faster... edit* After second line comes NO SCSI BOOT DEVICE FOUND BIOS not installed!!!!! What it means?

May 12, 2003, 07:40 PM	Thread Starter #6
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	Going to check the manual now...

May 12, 2003, 08:11 PM	Thread Starter #8
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	I am running Win2k Server on the machine, the card and cdrw are from an older system, there it worked, but i cannot remember what the config was! And can you maybe tell me what option i am looking for to disable the bios?

May 12, 2003, 08:15 PM	Thread Starter #9
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	I have there: Host Adapter BIOS (config util Reserves BIOS space): Enable Support removable disk under bios ficex disk: Boot only Extended BIOS Translation for DOS Drives > ! Gbyte: Enabled Display CTRL-A Message During BIOS Initialization: Enabled Multiple Lun Support : Disable Bios Support for bootable cd: Enable Bios Support for Int13 Extensions: Enabled

May 12, 2003, 08:19 PM	Thread Starter #11
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	ok, many many tnx for so far! i go try see what i can find in this manual!

May 12, 2003, 08:24 PM	#12
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	Just rememberd check all of your pins and check your cable if 1 pin is not making contact it will not work correctley This I do know. Scsi cables are very delicate. Internal cables are 4-15 dollars so not that big of a deal. I just had to replace my cable for my cdroms I scraped it on my case while cleaning the dust out and none of my cdroms would work very well kept getting erros then I check the cable. Just giving ya som ideas. __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR]

May 12, 2003, 09:01 PM	Thread Starter #13
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	I did everything, read manuals, update drivers, update firmware from my CDRW, and still not work good, but when i boot windows it gives me the message "at least 1 drive failed during start up" But i do see the CDRW in the hardware tab. and at my computer is also and extra cd drive, but i cannot acces my comp. when i have the cdrw closed, when i open it it starts load my comp.... Any suggestions?

May 12, 2003, 09:10 PM	#14
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	Ok another Idea if it's a 2940uw flash your Bios http://www.adaptec.com/worldwide/sup...y=afuv220.exe. I installed one for a freind on a XP machine and in order for it to work correctley i had to flash the Bios. Ok so I noticed you said 2940w there is an updated ver for that also http://www.adaptec.com/worldwide/sup...y=2940v116.exe It sounds like you have done evcery thing correctly. Dangit you cannot flash 2940w unless you have equipment. __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR] Last edited by BONEHEAD; May 12, 2003 at 09:19 PM.

May 12, 2003, 09:17 PM	Thread Starter #15
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	Yeah i've downloaded this too, but i dont understand how to do this, when i unzip it, there are 2 files, 1 .txt the other .hex... And the text file say's: README.TXT for 2940v116.EXE ************************************************ ************************* 8BIOS32.HEX is intended for users of the Adaptec AHA-2940, and requires EPROM Programmer equipment. If you do not have access to this type of equipment, you will not be able to program your own EPROMs. If you feel that your hardware problems require an update of the AHA-2940 firmware, please consult with Technical Support on this issue. And i dont understand this

May 12, 2003, 09:34 PM	Thread Starter #17
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	nope, it wont open My computer, only when i open the cd drive it opens...

May 12, 2003, 09:45 PM	#18
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	Well short of installing card and cdrom in another "test" computer I would disconnectmy ide cdrom's an try booting. If you have Agp vid card make sure scsi is at least in pci slot 2 if pci vid card vid card should be in slot 1 On board vid scsi does not mater. Also check to see if card is seated properly. If all is ok i still think it is the cable seen it to many times. __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR]

May 12, 2003, 09:48 PM	Thread Starter #19
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	Did all what you did, also tried a other cable also doesnt work I guess this is last we could try?

May 12, 2003, 09:53 PM	#20
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	Well sorry did'nt fix it. I have a goodwill computer store in my town that sells used parts really cheap if you got a place like that pick up another controller. I still think the cdrw still works. this is the hardest scsi problem i've ever had. __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR]

May 12, 2003, 09:58 PM	Thread Starter #21
Saint_K InSaNe Join Date: Aug 2002 Location: Den haag, netherlands Posts: 836 Rep Power: 0	Hmmm i think the CDRW issnt worth it so much to buy a new controller! But many thanks for the help!

May 12, 2003, 10:02 PM	#22
BONEHEAD DriverHeaven Lover Join Date: Nov 2002 Location: TEXAS Posts: 182 Rep Power: 0	Not a problem. __________________ [COLOR=red]Xp Pro Sp2 Amd Athlon 2400+ O/C 2800+ (2250 GHZ)Antec True 550 ps Dragon Orb 3 7000rpm 2 80mm Case fans [/COLOR] [COLOR=red]2 40mm case fans[/COLOR] [COLOR=red]1.5 Gig Ecc Ram Msi KT2 COMBO[/COLOR] [COLOR=red]Adaptec 29320A-R[/COLOR] [COLOR=red]8 Seagate 36 gig ultra 320 10k [/COLOR] [COLOR=red]1 Toshiba SD-M1401 [/COLOR] [COLOR=red]1 Plextor 124TS cdrw [/COLOR] [COLOR=red]2 Nec4551a 1 Samsung TS-H552U 1 Nec3520a[/COLOR] [COLOR=red]Ati AIW Radeon 8500 128mb SoundBlaster X-Fi Platinum[/COLOR] [COLOR=red]Midiland sm7401 5.1 Hp 4C scanner VPR 17'' Lcd[/COLOR] [COLOR=red]Apc Back-ups RS1500[/COLOR] [COLOR=#ff0000][/COLOR] [COLOR=#ff0000]Taken by the ex maybe to return soon[/COLOR]