Nf7 series bios update 1.8

DriveEuro · Aug 1, 2003, 07:07 PM

here

Fixed the problem that system hangs up with POST code 01 while resuming from STR mode with user defined DRAM timings. With default SPD setting, no problem at all and doesn't need this update.

Fixed the problem that system hangs up at POST code FF with over clocking setting- change the multiplier factor from CPU default to 19.

Fixed the problem that Barton 2500+ CPU is occasionally detected as Barton 3200+. If 400 FSB CPU is installed, users need to select correct CPU type in SoftMenuIII by themselves.

BIOS Compile date: 7/24/2003.

Aug 1, 2003, 07:07 PM	#1
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	Nf7 series bios update 1.8 here Fixed the problem that system hangs up with POST code 01 while resuming from STR mode with user defined DRAM timings. With default SPD setting, no problem at all and doesn't need this update. Fixed the problem that system hangs up at POST code FF with over clocking setting- change the multiplier factor from CPU default to 19. Fixed the problem that Barton 2500+ CPU is occasionally detected as Barton 3200+. If 400 FSB CPU is installed, users need to select correct CPU type in SoftMenuIII by themselves. BIOS Compile date: 7/24/2003. __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024