|
|||||||
| Motherboards, Networking and Misc Forum Need the newest 4-in-1s? Some nForce drivers? some other driver you need? |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
Fell off the tech wagon
|
motherboard RAM
My motherboard is talking about duel and single sided ram? I am not to sure what that is if some one could tell me what the Corsair XMS ram is that would be a great help thanks!
|
|
|
|
|
|
#2 |
|
HardwareHeaven Extreme Member
|
Single sided, the ram only has chips on one side, (uses up 1 BANK)
put 2 or 4 of these in a 4 slot setup / or 2 slot setup and the board will see the ram @ full speed Double sided , the ram only has chips on one side (uses up 2 banks) put 2 of in a 4 slot setup, or 1 of these in the 2 slot setup and the board will see the ram @ full speed 4 of these in a 4 slot setup / or 2 in a 2 slot setup and the board will see the ram @ 333 speed and T2 lessed timeings... Will couse severe peformance loss
__________________
|
|
|
|
|
|
|
|
Fell off the tech wagon
|
wow that was a mess load of infomation lol so in simple terms u are saying the Corsair XMS ram I have is single sided using one of the 4 banks i have? and when I have 2 it will use a total of 2 out of the 4 banks that i have?
|
|
|
|
|
|
#4 | |
|
HardwareHeaven Extreme Member
|
Quote:
Consider it each ram slot has 2 banks, sigle sided only uses 1, double uses 2 When the banks are full, the boards force everything into a slower MHZ and timeings So with a two sloted board 1 single sided, 1 double sided= fine 2 single sided = fine 2 double sided= Problem = compatablity mode / slower timeigs forced With a board with 4 slots should look more like this to many combinations but this is the biggie 4 double sided = Problem = compatablity mode / slower timeings forced 4 single sided = fine
__________________
|
|
|
|
|
![]() |
| Thread Tools | |
|
|