|
|||||||
| Motherboards, Networking and Misc Forum Need the newest 4-in-1s? Some nForce drivers? some other driver you need? |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Lover
Join Date: May 2005
Posts: 137
Rep Power: 0 ![]() |
Awwww Cr4P! Disk help
So my external 250gb HD decided to be weird today
I had to reset because CS:S lock up on load. nothing to odd, usually its in game, not loading that it locks but i figured w/e restarted and ran CS:S for a while np then went to start my Mp3s and nothing would play... hmm go to folders open them on my other drive, fine go to my computer and notice it says "Local Disk" not the name "Glutton" which is what its called i double click, it says it hasent been formatted yet.. would i like to.. Oh hell no... its done this once before - firewire got confused, nothing i plugged in would work - reset and it was ok so i take it out of the firewire, bring it to laptop, plug it in with USB and a few bleeps and bloops later i open up my computer and "local disk" is there again I know Partiton magic has a partitoin fix and some other fun tools, but last time i tried to use it, it (not me... it..) screwed up the disk and almost made me very mad, luckly i was able to salavage it and nothing was lost is there another program that can fix boot records or partition tables?? I really dont want to have to loose this cause of a reset it didnt like |
|
|
|
|
|
#2 |
|
DriverHeaven Extreme Member
Join Date: May 2005
Posts: 6,794
Rep Power: 0 ![]() ![]() |
Is it possible to chkdsk it?
It could be a bad upcase table which I had happen to 150 GB of stuff, in which case it IS possible to repair. You just have to make sure $UPCASE is fine and all the NTFS records are ok. PQ magic has a partition error check too which may help |
|
|
|
|
|
|
|
DriverHeaven Lover
Join Date: May 2005
Posts: 137
Rep Power: 0 ![]() |
Chkdsk in CMD line says its in RAW and chkdsk is not available for raw data
|
|
|
|
|
|
#4 |
|
DriverHeaven Extreme Member
Join Date: May 2005
Posts: 6,794
Rep Power: 0 ![]() ![]() |
Then you'll have to use a hex editor
|
|
|
|
|
|
#5 |
|
DriverHeaven Senior Member
Join Date: May 2004
Location: Quebec , Canada
Posts: 746
Rep Power: 0 ![]() |
How about fixboot in console ?
__________________
Zing a ling... zing a ling a ling ... A8N-E - A64x2 4600, 2048 Mb Kingston ram 400mhz cas 2.5 ( 2 x 1024 DualChannel ), Seagate 320 Gig 7200 16Mb cache S-ata 2, GeForce 7900GT 512MB, Enermax 460watt power supply, WindowsXP SP2. |
|
|
|
|
|
|
|
DriverHeaven Lover
Join Date: May 2005
Posts: 137
Rep Power: 0 ![]() |
fixboot, where can i get that, if i go to console and try it, it says its unrecognized
|
|
|
|
|
|
#7 |
|
DriverHeaven Senior Member
Join Date: May 2004
Location: Quebec , Canada
Posts: 746
Rep Power: 0 ![]() |
here s the link you need to do this
http://www.microsoft.com/resources/d..._overview.mspx http://www.microsoft.com/resources/d...s_fixboot.mspx
__________________
Zing a ling... zing a ling a ling ... A8N-E - A64x2 4600, 2048 Mb Kingston ram 400mhz cas 2.5 ( 2 x 1024 DualChannel ), Seagate 320 Gig 7200 16Mb cache S-ata 2, GeForce 7900GT 512MB, Enermax 460watt power supply, WindowsXP SP2. |
|
|
|
|
|
#8 |
|
DriverHeaven Extreme Member
Join Date: May 2005
Posts: 6,794
Rep Power: 0 ![]() ![]() |
You could also try a raw disk editor and make sure $UPCASE is complete.... I think thats what happened to me...
|
|
|
|
![]() |
| Thread Tools | |
|
|