Xaser III case fans

Markius · Dec 15, 2003, 07:00 AM

im wondering if someone can give me instructions to set up my case so i can get/have the fan speed dials working

i have the fans actually working i just couldnt understand the thermaltake manual.....

anyhelp would be great!

i have the Xaser III super tower v1000+ btw

Sharkims · Dec 15, 2003, 09:16 AM

There should be 6 power connectors comming out of the back of the fan control unit. Two which are labeled "Power Supply" Hook those up through two molox connectors. Then use the other connections labeled "Fan #" and hook up the fans to those.

Markius · Dec 19, 2003, 11:34 AM

everything is all hooked up but the speed dials arent working...i cant work it out
(a friend has same case and cant get it either)

tastyweat · Dec 19, 2003, 01:34 PM

hmmm... and you have them all hooked up properly.... weird problem

Sharkims · Dec 19, 2003, 02:22 PM

Are you sure you're plugging them into the right side of the connector? Make sure the PSU is plugged into the rear part of the power connectors. Then the fans go into the front of the fan connectors.

Ikaruslapam · Dec 25, 2003, 09:06 PM

Hm.....different problem with same tower. i have the asus p4c800 deluxe and i cannnot use my microphone. i have connected the pins to the cabels to the panel. but nothing worked. then i realized, that there are some more pins at the board (nc and 5+va) but i have no cabels for these pins?!? waht can i do? plz. help! thx

deadman24 · Dec 26, 2003, 01:33 AM

check your mobo manual to see what they are for then recheck your pins

Ikaruslapam · Dec 26, 2003, 01:36 AM

yeah i get it!

i have to click to a special option at the asus audio software.......
hmm....but next prob (yiibbiiieee iam sooo happy) the qualitiy is very bad.....clanmates do not understand me........i hope, that the reason for the qualitiy is not the tower itself....

Dec 15, 2003, 07:00 AM	#1
Markius DriverHeaven Senior Member Join Date: Sep 2003 Location: Australia Posts: 2,350 Rep Power: 0	Xaser III case fans im wondering if someone can give me instructions to set up my case so i can get/have the fan speed dials working i have the fans actually working i just couldnt understand the thermaltake manual..... anyhelp would be great! i have the Xaser III super tower v1000+ btw __________________ DriverHeavens Aussie... "Lifes tragedy is that we get old too soon and wise too late"

Dec 15, 2003, 09:16 AM	#2
Sharkims Seen my brain? Join Date: Jul 2003 Location: WA,USA Posts: 760 Rep Power: 0	There should be 6 power connectors comming out of the back of the fan control unit. Two which are labeled "Power Supply" Hook those up through two molox connectors. Then use the other connections labeled "Fan #" and hook up the fans to those. __________________ System-1: MSI K8N Neo Platinum \|\| A64 3200+(200x11) - Zalman 7000A-AlCu \|\| 1x1gb OCZ PC3200@400(3-3-3-7) \|\| 9800XT \|\| WD Raptors 2x36 RAID0 System-2: MSI 875P Neo-FIS2R \|\| P4 2.4c(FSB:200) - Intel Cooler \|\| 2x256 GEIL PC3200@400(2-3-3-6) \|\| AIW9000 \|\| WD SE 120x2 RAID0 System-3: DELL Inspiron 9100 \|\| P4 3.0c(mobile) \|\| 2x256mb PC3200(3-3-3-8) \|\| Mobility Radeon 9700 - 128mb \|\| WSXGA+ 15.4" \|\| 60gb 5400RPM 8mb

Dec 19, 2003, 11:34 AM	Thread Starter #3
Markius DriverHeaven Senior Member Join Date: Sep 2003 Location: Australia Posts: 2,350 Rep Power: 0	everything is all hooked up but the speed dials arent working...i cant work it out (a friend has same case and cant get it either) __________________ DriverHeavens Aussie... "Lifes tragedy is that we get old too soon and wise too late"

Dec 19, 2003, 01:34 PM	#4
tastyweat Lurking Join Date: Feb 2003 Location: The void Posts: 4,794 Rep Power: 73 System Specs	hmmm... and you have them all hooked up properly.... weird problem __________________

Dec 19, 2003, 02:22 PM	#5
Sharkims Seen my brain? Join Date: Jul 2003 Location: WA,USA Posts: 760 Rep Power: 0	Are you sure you're plugging them into the right side of the connector? Make sure the PSU is plugged into the rear part of the power connectors. Then the fans go into the front of the fan connectors. __________________ System-1: MSI K8N Neo Platinum \|\| A64 3200+(200x11) - Zalman 7000A-AlCu \|\| 1x1gb OCZ PC3200@400(3-3-3-7) \|\| 9800XT \|\| WD Raptors 2x36 RAID0 System-2: MSI 875P Neo-FIS2R \|\| P4 2.4c(FSB:200) - Intel Cooler \|\| 2x256 GEIL PC3200@400(2-3-3-6) \|\| AIW9000 \|\| WD SE 120x2 RAID0 System-3: DELL Inspiron 9100 \|\| P4 3.0c(mobile) \|\| 2x256mb PC3200(3-3-3-8) \|\| Mobility Radeon 9700 - 128mb \|\| WSXGA+ 15.4" \|\| 60gb 5400RPM 8mb

Dec 25, 2003, 09:06 PM	#6
Ikaruslapam DriverHeaven Newbie Join Date: Dec 2003 Location: GERMANY Posts: 2 Rep Power: 0	asus p4c800 and thermaltake! Hm.....different problem with same tower. i have the asus p4c800 deluxe and i cannnot use my microphone. i have connected the pins to the cabels to the panel. but nothing worked. then i realized, that there are some more pins at the board (nc and 5+va) but i have no cabels for these pins?!? waht can i do? plz. help! thx

Dec 26, 2003, 01:33 AM	#7
deadman24 DriverHeaven Junior Member Join Date: Dec 2002 Posts: 24 Rep Power: 0	check your mobo manual to see what they are for then recheck your pins __________________ ___________________________ AMD Athlon Xp 2400+ 512 Meg DDR ram PowerColor ATi Radeon 9800XT Soundblaster Live! Jetway V600DAP Xaser III Super Tower Blue

Dec 26, 2003, 01:36 AM	#8
Ikaruslapam DriverHeaven Newbie Join Date: Dec 2003 Location: GERMANY Posts: 2 Rep Power: 0	yeah i get it! i have to click to a special option at the asus audio software....... hmm....but next prob (yiibbiiieee iam sooo happy) the qualitiy is very bad.....clanmates do not understand me........i hope, that the reason for the qualitiy is not the tower itself....