[arkaine]

i don't know if this is new, but i never saw it b4 i installed xpsp1 v1097.
i went display properties>settings>advanced>monitor> and i found that i could change my screen refresh rate ^^.

if this is new, great otherwise, o well...

[Murdock]

Originally posted by The_Sire
thats what i did dagnabit all lol oh well im formatting it anyway as i type guess thats how we learn by mistakes. right?

I keep these options checked in XP Antispy 361 and no problems with installing 1097.

[JiggyTom]

Does anyone have the uxtheme.dll for 1097, because the link on the other page is for 1090, and it doesnt work...hmm

So if anyone has the link, please post, thanks!

[uf4]

Originally posted by vonderkin
i tried to install but got an error sp1 1097 aborted-that was it? what's up with that?
it extracts, then right after inspecting configuration i get the aborted message? the other packs installed fine and i did also archive them?
the file size is 129 megs right?

check the file.. whether its good or corrupted?
the easiest is to use Winrar.. right click the file and choose..
from menu.. extract files or open with winrar/test.
winrar will report if you've got a bad file..if so you'll need to redownload the file.
if the file is good.. read this may be it'll help you!

re: the file size is 129 megs right?
its not means that you've got good file.

;

[vonderkin]

i followed the advice about antispy, well i restore the original settings and 1097 installed without a hitch

[Robert McClelland]

na me download now found good link couldn't before or links dissapper alot so got good link from iexbeta.com site speedy too and you can used getright with it 8 hours to go on it.

[JiggyTom]

I just downloaded it from some guy on the Neowin forum, thanks anyway

[The Keeper]

Originally posted by arkaine
i don't know if this is new, but i never saw it b4 i installed xpsp1 v1097.
i went display properties>settings>advanced>monitor> and i found that i could change my screen refresh rate ^^.

if this is new, great otherwise, o well...

It's been there from the beginning...

Anyway, this build seems to be good, no problems so far.

[madkiller]

I started installing SP1 1097 when this message pop up... can any one help me plz thx you.



http://madkiller1.homestead.com/file...etup_error.JPG

[huonglant]

Can someone kindly point me to a link or show me how to splitstream SP1 into Corp Devils Own version?

Thanks.

[garfield]

Originally posted by huonglant
Can someone kindly point me to a link or show me how to splitstream SP1 into Corp Devils Own version?

Thanks.

Check your PM's
Garfield

[huonglant]

Thanks.

[The_Sire]

Originally posted by madkiller
I started installing SP1 1097 when this message pop up... can any one help me plz thx you.



http://madkiller1.homestead.com/file...etup_error.JPG

Well it says exactly what it says the VLK you were using turn out to be a pirated one

so we cant help you here with legit ones youll either have to find one on your own or do as we did and buy a license for it. sorry

[madkiller]

buy a license are you crazy i can't pay 500$ just for windowsXP.

[madkiller]

Originally posted by madkiller
I started installing SP1 1097 when this message pop up... can any one help me plz thx you.



http://madkiller1.homestead.com/file...etup_error.JPG

I have fixed this problem with the help of a friend. If any one have the same trouble i'm open to help any one.

[Blurayfan]

I just finished slipstreaming & burning 1097 to a re-writable cd, and
was able to locate a change in service pack.

Slipstream did not replace eula.txt with updated sp1 version
my only thought is maybe M$ removed 180 day time-bomb.

anybody else try slipstream if so did you have same result?

[Blurayfan]

For those who like to make a slipstream SP1 CD here is a tip to help you
make your new burned CD of SP1 bootable & able to repair your machine
if it was unbootable through hard drive.

this will work with either Nero or Easy CD

1. extract the boot image from your orginal WinXP CD with ISObuster
or other program.

2. when you tell your cd burner what image to use, select no emulation
& set sectors to 4. By default programs use 1 with XP this will not
work.

3. in Nero 5.5.9.0 or higher place check by "do not ADD "1" to ISO version".
if you have a lower version below is a registry fix.

----registry fix start----
[HKEY_CURRENT_USER\Software\ahead\Nero - Burning ROM\General]
"AddISOFileVersion"=dword:0
----registry fix end----

4. Burn your new CD it should now boot just like the original.

[Monkeyboy]

Hi Guys,

First off, thanks for the SP. This site is just so good I had to register!

Now down to more important things.....

SP1097 seems to knock out a few things - my firewall for one. While it was up and running, IE or Outlook wouldn't connect. Disabled the firewall, and everything was tickety-boo.

Well.... what more can we expect from MS?

I suspect it's because XP likes to report home every once in a while, so it's not happy if you dare to try and stop it, but I'm investigating and will get back to you with some answers later. (We all know it reports back to HQ when you change drivers, and even when you open up media player).

So beware....

JP (and yes, I am an MCSE)

[Duckndive]

madkiller

Re: Another problem with SP1

u got mail

[tamarelle]

Originally posted by Lee
must be really close to final release! because after slipstream the corp keys now work.

I just installed slipstreamed 1097 and no activation prblem at all.

I am sure this is posted somewhere but does anyone know where I might find instructions on how to slipstream? Can I use the methods that they use for Windows 2000 here: http://www.bink.nu/Bootcd/default.htm ??

Thanks

Tamarelle

[garfield]

Originally posted by tamarelle
I am sure this is posted somewhere but does anyone know where I might find instructions on how to slipstream? Can I use the methods that they use for Windows 2000 here: http://www.bink.nu/Bootcd/default.htm ??

Thanks

Tamarelle

You are on the right track. Just substitute 1097_xpsp1.exe for w2ksp3.exe and SP1 for SP3.

One thing though, you might want to copy the entire XP CD to your folder since XPSP1 places a couple of items outside the i386 folder.

[RiDDLeRN]

Originally posted by mickapetch
RiDDLeRN & madkiller,

windows key+E..
tools/folder options/view >move the dot to Show hidden files..
at c:\ open a file called.. boot (boot.ini)
ctrl+A ,ctrl+C... then reply me & ctrl+V to show it to me what you got now.

;

Think you're on the right way...
Before:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Micro soft Windows XP Professional" /KERNEL=LOGOOS.EXE /fastdetect

Now:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Micro soft Windows XP
Professional" /fastdetect


Time to test it...brb

[uf4]

Originally posted by RiDDLeRN
Think you're on the right way...
Now:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Micro soft Windows XP
Professional" /fastdetect
Time to test it...brb

well, you got it now.
and if you use any programs to make change to default values.. you shud adjust it to use Windows own.
really, you can do it manually.. i hate these programs!

;

[Spaceboy]

Ok, I've finished slipstreaming everything to a folder. I want to make the cd bootable, but which of the following boot files do I need to use for XP Corporate?:

w2kboot.bin CD bootsector
CDROM_NT.5 NT5 CD Identifier file
CDROM_IP.5 Professional CD Identifier file
CDROM_IS.5 Server CD Identifier file
CDROM_IA.5 Advanced Server CD Identifier File
CDROM_ID.5 Datacenter CD Identifier File
CDROM_SP.TST Service Pack1 CD Identifier File
CDROMSP2.TST Service Pack2 CD Identifier File
CDROMSP3.TST Service Pack3 CD Identifier File

[Robert McClelland]

Well I unstalled v1089 and installed 1097 I had np with it so far looks good go to for RC1 next version hehe

[RiDDLeRN]

Originally posted by mickapetch
well, you got it now.
and if you use any programs to make change to default values.. you shud adjust it to use Windows own.
really, you can do it manually.. i hate these programs!

;

Windows XP Professional, Service Pack 1, v.1097 (5.1 - 2600)

But now i've runned in to some problems with uxtheme.dll. I'm using a patched one, made for sp1-1097 but it doesn't work at all.
Anyone have a clue?

[Shaith]

Originally posted by Monkeyboy
Hi Guys,

First off, thanks for the SP. This site is just so good I had to register!

Now down to more important things.....

SP1097 seems to knock out a few things - my firewall for one. While it was up and running, IE or Outlook wouldn't connect. Disabled the firewall, and everything was tickety-boo.

Well.... what more can we expect from MS?

I suspect it's because XP likes to report home every once in a while, so it's not happy if you dare to try and stop it, but I'm investigating and will get back to you with some answers later. (We all know it reports back to HQ when you change drivers, and even when you open up media player).

So beware....

JP (and yes, I am an MCSE)

Try uninstalling and reinstalling your firewall software.

[The_Sire]

http://www.labmice.net/

how to change your VLK

good story

[canyon]

Originally posted by garfield
I installed the new service pack this morning and have been happily computing away. That was until I tried to check my email and could not change identities in Outlook Express. I select a new identity and it asks if I want to keep the same internet connection and I reply yes and it reopens the default identify again. If I change the default identity and shut down, then reopen the program again I can access the identity that I set as default but no others.
Its a pain to access it this way but I know that the other identities are still there. Has anyone else had this problem?

Same problem, go to manage identities and un-check "Use this identity when starting a program". Then when you open OE it will give you a choice of which identity to open. Could be a bug or MS just changed the way to open multiple accounts.

[huonglant]

I installed a clean XP Prof from Lexiso (not the Corp DevilsOwn vesion), then boot into the safemode, run the activation crack, reboot, then applied the SP1 1097 but after reboot, it reminded to activate so I run the activation crack again and I can't boot into windows anymore with infinite boot loops, boot into last known didn't help either.

Can anyone give me a hint?

Thanks.