ATI TOOL Version 0.0.21 Released !!!

ViRuS2k · Aug 20, 2004, 11:20 AM

Main Features

No limits overclocking.
Finding maximum core and memory overclock by rendering into a Direct3D window and scanning the output for visual artifacts.
Artifact scanning mode for non-ATI cards - use together with a 3rd party overclocking utility.
Loading a predefined clock profile on Application/Windows startup.
Hotkeys that can be used any time to load clocks from a profile. 3D application detection (Direct3D 8, Direct3D 9, OpenGL) to overclock your video card only when required.

ATITool will only work on Windows 2000/XP/2003.

Change Log :

Scan for Artifacts now makes a log entry every 15 minutes.
Added and tested X800SE PCI-E overclocking support.
When the main window is partly or completely off screen when launched, it will be moved to be visible.
Render window requires a hw accelerator + running driver.
Disabled maximizing/minimizing of render window.
Moved I2C access code into kernel driver.
Added option to set video card PCI latency
Improved theme support (more like enabled it).
Added option to create desktop icon after install.
Added RV410 support.
Added Video Memory Timings Editor (not in 0.0.21 release but in next dev. build)
Added option to disable the tray icon (icon will always be visible while ATITool is initializing).
Added Gamma Control
Added experimental "Remove 9000/9200/9550/9600 clock lock"
Trying to overwrite the default profile now gives an error msg.
Added option to limit log file size.
Bugfixes to the installer.
Added fan control for X800.
Added options to disable Direct3D error messages.
Added shared memory, other applications can now get ATITool data.
Fixed settings window popping up in wrong place.
Statically linked version - distribution is now only 820 KB in size!
Updated Kernel Mode driver - getting ready to port to 64 Bit.
Tray icon is automatically recreated when explorer crashes
If the tray icon can't be created (possible during windows startup, explorer is not running yet) just continue loading and create the icon as soon as explorer is ready.
Added text field with temperature to main window.
Added support for Radeon 9550 - these cards are overclocking locked. Use the softmod drivers.
Added support for sending clock/temp. data to MBM
Added option to log temperatures
Added overclocking/temp. monitoring support for X600.
Added temp. monitoring support for 9800 PRO on XT PCB with temp. chip.
Profile selection is no longer saved on exit, but on change.
room.x now included in executable.
Fixed bug where the tray temperature display would get stuck on desktop resize.
3D detection seems to have issues with DirectX 9.0C beta - this will not be addressed until the final version of DX9.0C is out.
Fixed bug with temperature detection
Fixed bug where find max. would try*too high clockrates*when clock frequency limits are enabled.
Added warning if D3D Debug Runtimes are active.
Screensaver will be disabled during 'find max' and 'scan for artifacts'
Added 'add to start menu' all users/current user
Tweaked*3D detection, will*now work with UT2K4's d3d9 renderer
Added option to change font/color of temperature in systray
Added temperature monitoring for ASUS cards, thanks Peter
Added extra checks to low-level hardware code

http://www.techpowerup.com/atitool/ATITool_0.0.21.exe

What a update and loads of new features, Enjoy guys.

RIV@NVX · Aug 20, 2004, 11:36 AM

Great tool!

The_Neon_Cowboy · Aug 20, 2004, 12:53 PM

cool, not that I use it that much, but this is a magor improvement

germanjulian · Aug 20, 2004, 01:07 PM

Quote:

Added option to set video card PCI latency

YEP remember my post on changing the PCI latency...

he saw my dublicate thread on H and added it to his feature... yeah... good find I found...

what a tool and so many improvements

Matt · Aug 20, 2004, 01:33 PM

i get the feeling this thing does not work. As my i have clicked Find Max Core and its upto 430 with no Artifacts found. Default is 378.
its been running 10 mins. Anyideas

Sandok · Aug 20, 2004, 02:13 PM

Ummm what card you got? The 9800 Pro? If u've got great case cooling, ur fine and it's nomral

Matt · Aug 20, 2004, 02:30 PM

Yup spot on, PowerColor 9800 Pro. I have changed the cooler to Arctic cooling. I have good Case cooling. 4x 80mm 1x 120mm CPU water cooled. PSU has a 120mm Fan as well. Hmmm give the program one more go.

Matt · Aug 20, 2004, 04:01 PM

Nope its not setting the new clock rate. Tried 3.9 and 3.8.

zerodamage · Aug 20, 2004, 04:38 PM

Wizzard is a good guy. His tool is unique and extremely useful.

Aug 20, 2004, 11:20 AM	#1
ViRuS2k HardwareHeaven Extreme Member Join Date: Mar 2003 Location: Uk Posts: 8,334 Rep Power: 0 System Specs	ATI TOOL Version 0.0.21 Released !!! Main Features No limits overclocking. Finding maximum core and memory overclock by rendering into a Direct3D window and scanning the output for visual artifacts. Artifact scanning mode for non-ATI cards - use together with a 3rd party overclocking utility. Loading a predefined clock profile on Application/Windows startup. Hotkeys that can be used any time to load clocks from a profile. 3D application detection (Direct3D 8, Direct3D 9, OpenGL) to overclock your video card only when required. ATITool will only work on Windows 2000/XP/2003. Change Log : Scan for Artifacts now makes a log entry every 15 minutes. Added and tested X800SE PCI-E overclocking support. When the main window is partly or completely off screen when launched, it will be moved to be visible. Render window requires a hw accelerator + running driver. Disabled maximizing/minimizing of render window. Moved I2C access code into kernel driver. Added option to set video card PCI latency Improved theme support (more like enabled it). Added option to create desktop icon after install. Added RV410 support. Added Video Memory Timings Editor (not in 0.0.21 release but in next dev. build) Added option to disable the tray icon (icon will always be visible while ATITool is initializing). Added Gamma Control Added experimental "Remove 9000/9200/9550/9600 clock lock" Trying to overwrite the default profile now gives an error msg. Added option to limit log file size. Bugfixes to the installer. Added fan control for X800. Added options to disable Direct3D error messages. Added shared memory, other applications can now get ATITool data. Fixed settings window popping up in wrong place. Statically linked version - distribution is now only 820 KB in size! Updated Kernel Mode driver - getting ready to port to 64 Bit. Tray icon is automatically recreated when explorer crashes If the tray icon can't be created (possible during windows startup, explorer is not running yet) just continue loading and create the icon as soon as explorer is ready. Added text field with temperature to main window. Added support for Radeon 9550 - these cards are overclocking locked. Use the softmod drivers. Added support for sending clock/temp. data to MBM Added option to log temperatures Added overclocking/temp. monitoring support for X600. Added temp. monitoring support for 9800 PRO on XT PCB with temp. chip. Profile selection is no longer saved on exit, but on change. room.x now included in executable. Fixed bug where the tray temperature display would get stuck on desktop resize. 3D detection seems to have issues with DirectX 9.0C beta - this will not be addressed until the final version of DX9.0C is out. Fixed bug with temperature detection Fixed bug where find max. would trytoo high clockrateswhen clock frequency limits are enabled. Added warning if D3D Debug Runtimes are active. Screensaver will be disabled during 'find max' and 'scan for artifacts' Added 'add to start menu' all users/current user Tweaked3D detection, willnow work with UT2K4's d3d9 renderer Added option to change font/color of temperature in systray Added temperature monitoring for ASUS cards, thanks Peter Added extra checks to low-level hardware code http://www.techpowerup.com/atitool/ATITool_0.0.21.exe What a update and loads of new features, Enjoy guys.

Aug 20, 2004, 12:53 PM	#3
The_Neon_Cowboy HardwareHeaven Extreme Member Join Date: Dec 2002 Location: U.S.A. Posts: 16,009 Rep Power: 92 System Specs	cool, not that I use it that much, but this is a magor improvement __________________

Aug 20, 2004, 01:33 PM	#5
Matt Techy Bloke Wasting Time Join Date: May 2002 Location: England UK Posts: 106 Rep Power: 0	hmmm i get the feeling this thing does not work. As my i have clicked Find Max Core and its upto 430 with no Artifacts found. Default is 378. its been running 10 mins. Anyideas __________________ Add your System spec Here

Aug 20, 2004, 02:30 PM	#7
Matt Techy Bloke Wasting Time Join Date: May 2002 Location: England UK Posts: 106 Rep Power: 0	Yup spot on, PowerColor 9800 Pro. I have changed the cooler to Arctic cooling. I have good Case cooling. 4x 80mm 1x 120mm CPU water cooled. PSU has a 120mm Fan as well. Hmmm give the program one more go. __________________ Add your System spec Here

Aug 20, 2004, 04:01 PM	#8
Matt Techy Bloke Wasting Time Join Date: May 2002 Location: England UK Posts: 106 Rep Power: 0	Nope its not setting the new clock rate. Tried 3.9 and 3.8. __________________ Add your System spec Here

Aug 20, 2004, 11:36 AM	#2
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 0 System Specs	Great tool!

Aug 20, 2004, 02:13 PM	#6
Sandok DriverHeaven Extreme Member Join Date: Jul 2004 Posts: 9,472 Rep Power: 0	Ummm what card you got? The 9800 Pro? If u've got great case cooling, ur fine and it's nomral

Aug 20, 2004, 04:38 PM	#9
zerodamage HardwareHeaven Extreme Member Join Date: May 2003 Location: Virginia, USA Posts: 3,478 Rep Power: 0 System Specs	Wizzard is a good guy. His tool is unique and extremely useful.