timing for kingston 1Gb DDR2 ram

keisuk3 · May 28, 2007, 10:54 PM

anyone know the timing for kingston 1gb DDR2 ram @ 226 @ 333 ?? im not 100% sure if its 4-4-4-12 @ 226. i have no clue about 333. i check da kingston website but i couldnt find my ram. i think da timing for 333 is 5-5-5-15. again im not 100%

the model is - kvr667d2n5/1G
pc2 - 5300 cl5

thank in advance

PangingJr · May 28, 2007, 11:19 PM

the memory is DDR2-667 (PC2-5300) 1.8V, with memory frequencies and latency timings...
200 MHz CL3 (3-3-3-9) / 266 MHz CL4 (4-4-4-12) / 333 MHz CL5 (5-5-5-15)

on a side note: if the ICs on the Kingston module are Nanya "D6408TEBGGL3U" or Hynix "FP-Y5" both can be overclocked very good.
if i can recall i used to see that the Kingston DDR2-667 with the Nanya ICs ran at DDR2-1050 (or so) 2.0V/2.1V
but it's just not every single one of them will do it, really. i have a couple pair of the modules that can do upto DDR2-950 CAS5 or DDR2-800 CAS4 with 2.0V or DDR2-800 1.8V.

May 28, 2007, 10:54 PM	#1
keisuk3 DriverHeaven Newbie Join Date: May 2007 Posts: 4 Rep Power: 0	timing for kingston 1Gb DDR2 ram anyone know the timing for kingston 1gb DDR2 ram @ 226 @ 333 ?? im not 100% sure if its 4-4-4-12 @ 226. i have no clue about 333. i check da kingston website but i couldnt find my ram. i think da timing for 333 is 5-5-5-15. again im not 100% the model is - kvr667d2n5/1G pc2 - 5300 cl5 thank in advance

May 28, 2007, 11:19 PM	#2
PangingJr Member Join Date: Mar 2003 Posts: 5,989 Rep Power: 71	the memory is DDR2-667 (PC2-5300) 1.8V, with memory frequencies and latency timings... 200 MHz CL3 (3-3-3-9) / 266 MHz CL4 (4-4-4-12) / 333 MHz CL5 (5-5-5-15) on a side note: if the ICs on the Kingston module are Nanya "D6408TEBGGL3U" or Hynix "FP-Y5" both can be overclocked very good. if i can recall i used to see that the Kingston DDR2-667 with the Nanya ICs ran at DDR2-1050 (or so) 2.0V/2.1V but it's just not every single one of them will do it, really. i have a couple pair of the modules that can do upto DDR2-950 CAS5 or DDR2-800 CAS4 with 2.0V or DDR2-800 1.8V. Last edited by PangingJr; May 29, 2007 at 12:05 AM.