1700+ JIUHB overclocking

RIV@NVX · Apr 17, 2003, 09:29 PM

I got myself 1700+ JIUHB 0310XPMW CPU.
I did the wire trick and installed it.
In BIOS I was able to choose standard multipliers, up to 12.5 (14 and 15 were mapped to 5 and 5.5).

Is there a way to choose a multiplier higher than 12.5 with this CPU and KT3? I am sure it can do more than that, but I am unable to try it

Veky · Apr 17, 2003, 10:12 PM

Why would you need a higher multiplier? Crank up the baby to 12.5 x 180 and increase the voltage.

DriveEuro · Apr 18, 2003, 04:58 AM

He might only be running PC2100 or just PC2700...

shuki · Apr 18, 2003, 09:35 AM

I'm with veky, I much prefer higher fsb and lower multi

provided of course your mem and other pci stuff can hang as DE mentioned..

Quarter · May 3, 2003, 10:25 PM

The "wire trick" / workaround is only for manually resetting the 8x adder bit on chips with a 13 or greater multiplier combined with a motherboard that does not support changing the 5th bit..

For more info on the Athlon bridges and circuitry, check out http://www.beachlink.com/candjac/index.htm

TheIceMan · May 3, 2003, 11:05 PM

my 1700+ dlt JIUHB 0309XPMW runnig pirme stable @ 2350 13,5 * 170mhz @ 1,55v (nf7-s rev 1.2 "silent pc"

)

@ 1,625v 2450 mhz

Veky · May 4, 2003, 12:30 AM

Ice, you gotta tell me the codes of that procesor.

JavaFox · May 4, 2003, 12:47 AM

IceMan, how did you hit 13.5?!

TheIceMan · May 4, 2003, 04:29 PM

Quote:

Originally posted by JavaFox
IceMan, how did you hit 13.5?!

no hardwaremod
all i did was select 13.5 @ bios menu

dunno why normaly 12.5 should be the max @ nforce 2 board´s.

my friend got an 1700+ JIUHB runnig at 13 * 180 without any hardwaremod.

-Timberwolf- · May 6, 2003, 01:26 PM

Cool...

And what is that "wire trick" you said something about?

~~craig588~~ · May 6, 2003, 01:41 PM

I have an AIUHB 2100+ (Supposeably the A means that its a high end chip). Do you think I'll get even better overclocks when I install it, or is their just something speacial about the 1700+ JIUHB?

shuki · May 6, 2003, 01:45 PM

Take a speaker wire, or any wire. You need a single tiny strand of wire being less than 1cm long. Bend it in U-shape and drop it nicely into the holes shown below. Put the CPU in and ready to boom...

Apr 17, 2003, 09:29 PM	#1
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 0 System Specs	1700+ JIUHB overclocking I got myself 1700+ JIUHB 0310XPMW CPU. I did the wire trick and installed it. In BIOS I was able to choose standard multipliers, up to 12.5 (14 and 15 were mapped to 5 and 5.5). Is there a way to choose a multiplier higher than 12.5 with this CPU and KT3? I am sure it can do more than that, but I am unable to try it __________________ -- Vedran

Apr 18, 2003, 04:58 AM	#3
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	He might only be running PC2100 or just PC2700... __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024

Apr 17, 2003, 10:12 PM	#2
Veky DriverHeaven Junior Member Join Date: Dec 2002 Location: Croatia Posts: 69 Rep Power: 0	Why would you need a higher multiplier? Crank up the baby to 12.5 x 180 and increase the voltage.

Apr 18, 2003, 09:35 AM	#4
shuki DriverHeaven Senior Member Join Date: May 2002 Location: in the hidden place Posts: 1,975 Rep Power: 0	I'm with veky, I much prefer higher fsb and lower multi provided of course your mem and other pci stuff can hang as DE mentioned..

May 3, 2003, 10:25 PM	#5
Quarter DriverHeaven Junior Member Join Date: Jul 2002 Location: CA / USA Posts: 28 Rep Power: 0	The "wire trick" / workaround is only for manually resetting the 8x adder bit on chips with a 13 or greater multiplier combined with a motherboard that does not support changing the 5th bit.. For more info on the Athlon bridges and circuitry, check out http://www.beachlink.com/candjac/index.htm

May 3, 2003, 11:05 PM	#6
TheIceMan DriverHeaven Junior Member Join Date: Apr 2003 Location: Germany / Bayern Posts: 31 Rep Power: 0 System Specs	my 1700+ dlt JIUHB 0309XPMW runnig pirme stable @ 2350 13,5 * 170mhz @ 1,55v (nf7-s rev 1.2 "silent pc" ) @ 1,625v 2450 mhz

May 4, 2003, 12:30 AM	#7
Veky DriverHeaven Junior Member Join Date: Dec 2002 Location: Croatia Posts: 69 Rep Power: 0	Ice, you gotta tell me the codes of that procesor.

May 4, 2003, 12:47 AM	#8
JavaFox E Pluribus Unum Join Date: May 2002 Posts: 3,203 Rep Power: 0	IceMan, how did you hit 13.5?!

May 6, 2003, 01:26 PM	#10
-Timberwolf- DriverHeaven Newbie Join Date: May 2003 Location: Denmark Posts: 13 Rep Power: 0	Cool... And what is that "wire trick" you said something about?

May 6, 2003, 01:41 PM	#11
~~craig588~~ Banned Join Date: Nov 2002 Location: In clothing Posts: 3,510 Rep Power: 0	I have an AIUHB 2100+ (Supposeably the A means that its a high end chip). Do you think I'll get even better overclocks when I install it, or is their just something speacial about the 1700+ JIUHB?

May 6, 2003, 01:45 PM	#12
shuki DriverHeaven Senior Member Join Date: May 2002 Location: in the hidden place Posts: 1,975 Rep Power: 0	Take a speaker wire, or any wire. You need a single tiny strand of wire being less than 1cm long. Bend it in U-shape and drop it nicely into the holes shown below. Put the CPU in and ready to boom...