|
|||||||
| Overclocking and Modding A haven for all you hardware Gurus who want to push it all to the MAX. |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Newbie
Join Date: Nov 2007
Posts: 6
Rep Power: 0 ![]() |
Overclocking My athlon 2500+ => need help!
Hello! I'm posting today to get some help of you all, mister and misses pro! Well, i am a big newbie so i realy need to get your support for that.
Ok here I start : I would like to overclock my Amd atlhon 2500+ ( or 2600+ :Q ) but i don't realy know anything in this business >.< . Here are my specs ( i get them with everest ) : Field Value CPU Properties CPU Type AMD Athlon XP 2500+ CPU Alias Barton CPU Stepping A2 CPUID CPU Name AMD Athlon(tm) XP 2600+ CPUID Revision 000006A0h CPU Speed CPU Clock 1908.78 MHz CPU Multiplier 11.5x CPU FSB 165.98 MHz Memory Bus 165.98 MHz CPU Cache L1 Code Cache 64 KB L1 Data Cache 64 KB L2 Cache 512 KB (On-Die, Full-Speed) Motherboard Properties Motherboard ID 06/26/2003-KM400-8235-6A6LYM4BC-00 Motherboard Name MSI MS-6786 (3 PCI, 1 AGP, 1 CNR, 2 DIMM, Audio, Video, LAN) Chipset Properties Motherboard Chipset VIA VT8378 UniChrome KM400 CAS Latency (CL) 2.5T Command Rate (CR) 2T SPD Memory Modules DIMM1: Kingston K 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz) DIMM2: Corsair VS1GB400C3 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) BIOS Properties System BIOS Date 06/26/03 Video BIOS Date 06/07/11 Award BIOS Type Phoenix - AwardBIOS v6.00PG Award BIOS Message W6786VP6 V1.0 062603 12:15:46 DMI BIOS Version V1.0 Graphics Processor Properties Video Adapter ATI Radeon 9600 Pro GPU Code Name RV350 (AGP 8x 1002 / 4150, Rev 00) GPU Clock 398 MHz (original: 398 MHz) Memory Clock 202 MHz (original: 202 MHz) Well here is the another prob, i heard that we had to change something in the bios, something called fsb and voltage ( something like that, tell me if i'm wrong =D ) and i would like to know where to change them, and what should i put to the max ... I will realy thank you if you reply / help me! I wish you could help me! -Melodia |
|
|
|
|
|
#2 |
|
Xtreme
Join Date: Oct 2003
Location: Grande Prairie, AB, Can
Posts: 4,254
Rep Power: 101 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I am doubting that you can even overclock with that board. That chipset has no PCI/AGP locks.
|
|
|
|
|
|
#3 | |
|
Obvious Closet Brony Pony
|
best point to start is pushing the FSB up until it becomes unstable in small increments...
but i doubt you'll get beyond 183fsb... just make sure your cpu doens't run aboe 60*C imo
__________________
Quote:
|
|
|
|
|
|
|
|
|
DriverHeaven Newbie
Join Date: Nov 2007
Posts: 6
Rep Power: 0 ![]() |
Hmm, the point is that my CPU is already running at 65°
. Would it be better if I buy another CPU?
|
|
|
|
![]() |
| Thread Tools | |
|
|