Core2Duo E7300 Overclock

~~RE III - Frankie~~ · Feb 10, 2009, 02:44 PM

I got my E7300 up to 4.0GHz.

Have a look:

**kris23** · Feb 10, 2009, 03:00 PM

very nice, just be sure to tone it down when not needed....

~~RE III - Frankie~~ · Feb 10, 2009, 03:05 PM

Quote:

Originally Posted by kris23

very nice, just be sure to tone it down when not needed....

That's exactly what I did! Temperature was completely unstable on air cooling. jumping up 8 to 10 degrees just from web page scrolling!!

~~RE III - Frankie~~ · Feb 16, 2009, 05:42 AM

I've been running standard clocks for the past week, but am hoping to go up to 4GHz again when my bro-in-law and sis come round to show off some benchmarks in F.E.A.R. Check out my thread in benching for an update soon. I will post it there.

nicnik · Feb 16, 2009, 12:53 PM

I'm sure it'll rip fear apart

mkk · Feb 16, 2009, 01:26 PM

No it's really running at 3.6GHz because the system info above doesn't account for the use of a lowered multiplier. My chip needs much more voltage to run just a little higher so I decided that 3.6 was the sweetspot.

**Mousey** · Feb 16, 2009, 02:32 PM

4.28, holy momma o.o

~~RE III - Frankie~~ · Feb 17, 2009, 12:15 PM

Nice numbers. 3.6 sounds good.

~~RE III - Frankie~~ · Feb 17, 2009, 12:17 PM

Quote:

Originally Posted by nicnik

I'm sure it'll rip fear apart

I can't wait really.

~~RE III - Frankie~~ · Feb 18, 2009, 03:31 AM

Here's a more recent overclock ranging from 3.4GHz to 3.60GHz.

These are at standard clocks:

3.4GHz:

Finally 3.60GHz:

I want to run 3DMark06 at 4.0GHz, but am hesitant because of only having air cooling. Probably will do it though! When I do I'll post the results here!!

~~RE III - Frankie~~ · Feb 18, 2009, 04:29 AM

Here is my lovely 3.75GHz clocks:

I will edit this post to enter my 3.8GHz clock when it becomes successful.

GigaWatt · Feb 18, 2009, 11:22 AM

WOW, nice clocks...

... is this achieved with stock cooling...?

~~RE III - Frankie~~ · Feb 18, 2009, 11:25 AM

No. I have a Xigmatek S1283 with a Thermaltake 12cm 2500RPM fan connected to it. Also 3 other 12cm fans inside the case. I have been at 4.0GHz all day without any problems.

*CyberpowerUK* · Feb 18, 2009, 01:44 PM

What are you temps like under full load at 1.5VCore?

Intels 45nm process should be kept at 1.45Volts or less ideally for long-term use, although to be honest the chips so cheap loosing a few years to degradation wont really matter that much.

~~RE III - Frankie~~ · Feb 18, 2009, 11:21 PM

Everything is stable and the temps run at about 60 even under full load.

*CyberpowerUK* · Feb 19, 2009, 10:52 AM

Good good

Nice OC

Mike

~~RE III - Frankie~~ · Feb 20, 2009, 03:34 PM

Thankyou.

Feb 10, 2009, 02:44 PM	#1
~~RE III - Frankie~~ Banned Join Date: Jan 2009 Posts: 1,754 Rep Power: 0	Core2Duo E7300 Overclock I got my E7300 up to 4.0GHz. Have a look:

Feb 10, 2009, 03:00 PM	#2
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,019 Rep Power: 131 System Specs	Re: Core2Duo E7300 Overclock very nice, just be sure to tone it down when not needed.... __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

Feb 16, 2009, 05:42 AM	Thread Starter #4
~~RE III - Frankie~~ Banned Join Date: Jan 2009 Posts: 1,754 Rep Power: 0	Re: Core2Duo E7300 Overclock I've been running standard clocks for the past week, but am hoping to go up to 4GHz again when my bro-in-law and sis come round to show off some benchmarks in F.E.A.R. Check out my thread in benching for an update soon. I will post it there.

Feb 16, 2009, 12:53 PM	#5
nicnik In the Land of Snow Join Date: Oct 2005 Location: London, UK Posts: 569 Rep Power: 46 System Specs	Re: Core2Duo E7300 Overclock I'm sure it'll rip fear apart __________________ Follow Me on Twitter Battlefield 3 \| youtube \| TwitchTV

Feb 16, 2009, 01:26 PM	#6
mkk Cthulhu/Dagon 2012 Join Date: Oct 2003 Location: Gefle, Sweden Posts: 4,495 Rep Power: 132 System Specs	Re: Core2Duo E7300 Overclock No it's really running at 3.6GHz because the system info above doesn't account for the use of a lowered multiplier. My chip needs much more voltage to run just a little higher so I decided that 3.6 was the sweetspot.

Feb 16, 2009, 02:32 PM	#7
Mousey Synth's Long Lost Bro Join Date: Jan 2007 Location: Web Design Hell Posts: 7,189 Rep Power: 245 System Specs	Re: Core2Duo E7300 Overclock 4.28, holy momma o.o __________________

Feb 17, 2009, 12:15 PM	Thread Starter #8
~~RE III - Frankie~~ Banned Join Date: Jan 2009 Posts: 1,754 Rep Power: 0	Re: Core2Duo E7300 Overclock Nice numbers. 3.6 sounds good.

Feb 18, 2009, 03:31 AM	Thread Starter #10
~~RE III - Frankie~~ Banned Join Date: Jan 2009 Posts: 1,754 Rep Power: 0	Re: Core2Duo E7300 Overclock Here's a more recent overclock ranging from 3.4GHz to 3.60GHz. These are at standard clocks: 3.4GHz: Finally 3.60GHz: I want to run 3DMark06 at 4.0GHz, but am hesitant because of only having air cooling. Probably will do it though! When I do I'll post the results here!!

Feb 18, 2009, 04:29 AM	Thread Starter #11
~~RE III - Frankie~~ Banned Join Date: Jan 2009 Posts: 1,754 Rep Power: 0	Re: Core2Duo E7300 Overclock Here is my lovely 3.75GHz clocks: I will edit this post to enter my 3.8GHz clock when it becomes successful. Last edited by RE III - Frankie; Feb 18, 2009 at 09:06 AM.

Feb 18, 2009, 11:22 AM	#12
GigaWatt Now In Color :D Join Date: Sep 2008 Location: Macedonia, Skopje Posts: 2,116 Rep Power: 81 System Specs	Re: Core2Duo E7300 Overclock WOW, nice clocks... ... is this achieved with stock cooling...? __________________ It's not schisophrenia... it's just a voice in my head...

Feb 18, 2009, 11:25 AM	Thread Starter #13
~~RE III - Frankie~~ Banned Join Date: Jan 2009 Posts: 1,754 Rep Power: 0	Re: Core2Duo E7300 Overclock No. I have a Xigmatek S1283 with a Thermaltake 12cm 2500RPM fan connected to it. Also 3 other 12cm fans inside the case. I have been at 4.0GHz all day without any problems.

Feb 18, 2009, 01:44 PM	#14
CyberpowerUK DriverHeaven Junior Member Join Date: Dec 2008 Location: The Toon Posts: 81 Rep Power: 25 System Specs	Re: Core2Duo E7300 Overclock What are you temps like under full load at 1.5VCore? Intels 45nm process should be kept at 1.45Volts or less ideally for long-term use, although to be honest the chips so cheap loosing a few years to degradation wont really matter that much.

Feb 18, 2009, 11:21 PM	Thread Starter #15
~~RE III - Frankie~~ Banned Join Date: Jan 2009 Posts: 1,754 Rep Power: 0	Re: Core2Duo E7300 Overclock Everything is stable and the temps run at about 60 even under full load.

Feb 19, 2009, 10:52 AM	#16
CyberpowerUK DriverHeaven Junior Member Join Date: Dec 2008 Location: The Toon Posts: 81 Rep Power: 25 System Specs	Re: Core2Duo E7300 Overclock Good good Nice OC Mike

Feb 20, 2009, 03:34 PM	Thread Starter #17
~~RE III - Frankie~~ Banned Join Date: Jan 2009 Posts: 1,754 Rep Power: 0	Re: Core2Duo E7300 Overclock Thankyou.