XP 1900+ Users??? How high can you O/C?

Candyman · Jun 25, 2002, 12:15 AM

Please post your overclocking works here. I just wanna know how high other 1900+ users have got their CPU to go. If possible, post motherboard and stepping code if you got it handy.

I got my 1900+ at 1760MHz (11.5 x 153)

AGOGA stepping on a Abit KX7-333

I just unlocked the CPU today. I am hoping to hit the 1.8GHz soon.

Zardon · Jun 25, 2002, 06:45 AM

I got my last one to 1736mhz, core volt 1.85 running stable with the most aggressive ram settings. the CPU wasnt unlocked, I just bumped the FSB up.... I think it was around the 157mhz mark. im sure an unlocked one you could get higher. nice CPU btw.

debaucher · Jun 29, 2002, 03:36 PM

The highest stable OC I can achieve is 1730mhz (2100+ rating). This is run @ default voltage for both ram and cpu, FSB 138, and with the muli set to 12.5/13 ( I had a bad experience with my first unlocking attempt, so the only multi's I can choose are 12 and 12.5/13 ).

If I drop the multi back to default (12) I can up the FSB to ~145, but it is not as stable as my current, plus I have to up the voltage on the CPU.

I think besides my mess-up on the unlocking (which is impossible to fix) the motherboard is holding me back. I have a MSI KT3 Ultra-ARU, with 3 Maxtor ATA133 40G hooked up in raid 0 array.

D.

tazdevl · Jul 1, 2002, 03:52 AM

I've got a 1800+ @ 1.73... bought it when the CPUs first hit the market. It could probably go higher. Waiting on a new one (1800+)... yields have been good so I'm betting with the SLK-800 I have coming, I'll be able to hit over 1.8MHZ. 2.0 would be nice, but don't think it would happen unless i had a TEC.

ToshiroOC · Jul 2, 2002, 10:44 PM

I have an AGKGA K processor, which on very chilly nights can get up to 1764mhz with 1.87v (1.85 in bios, but 1.87 in reality) and can hold 1722mhz even on the hottest southern california days with the same voltage. The AGKGA stepping was the first palomino processor stepping that i know of, and the K's were relatively rare. Some insane overclockers pushed an AGKGA K up to 2.0ghz with anti-freeze compressor cooled to a slush and fed with hi-pressure though a waterblock at 2.2v, so the processors have potential that my Swiftech MC462A/1.87v can't touch

toshirooc

edit: oops, forgot motherboard. I'm using an Epox 8KHA+ Rev.2.0 with the newest bios as of 7/2/02. (KT266A)

Mize · Jul 3, 2002, 01:07 AM

My MP 1900+ and XP 1800+ would both hit 1758 (185x9.5) at 1.85 v. I haven't really pushed the MP 1900+, but the XP 1800+ hit 1776 (187x9.5) at 2.1 v if only for a paranoid few minutes. Interestingly the MP 1900+ seems like it runs a bit warmer (different HSF though).

Mize

toddalaska · Jul 3, 2002, 03:34 AM

Mize my 1800+ agoga y is doing 185*9.5 alos its on water so its not even hot 35 idol 38-39 full load, thats at 1.97 volts.

i messed up my unlock so I have no ten multiplier or id try for more im prtetty sure shed take it. if i added some more core.

anybody know which bridge would kill the ten multiplier

Mize · Jul 3, 2002, 11:21 AM

Hey toddalaska:

10x is 01110 on the bridges so it's one of the center three. If you've got 9.5 then that's 01101 so I'd say it's your second bridge. You always start with 3 and then add per the bridges where the furthest right is 0.5 and, going left, they are 1, 2, 4 & 8. Of course the exception to that formula is that 00000 = 11.

In your case 01110 = 3 + 1 + 2 + 4 = 10
01101 = 3 + .5 + 2 + 4 = 9.5

One of the nicest things I've read about the Tbreds is that they unlock with a single bridge-short (L5). I bought the MP because I was so friggin' tired of repairing bridges that opened.

Nice xp 1800+ btw!

Mize

kpxplaya415 · Jul 13, 2002, 09:38 AM

n/m

percadann · Jul 15, 2002, 06:06 AM

Well my set up doesnt give me much room for over clocking! I run two 1900 mps on a
asus a7m266d with samsung ecc registerd ram and i can only increase my fsb i dont have
any mutiplyer setting to play with :0( So with that said here are my max over clock settings
ok 145/290@1739 is the max and 142/284@1703.89 is the setting i run at stable all day long..... All stock settings except for the fsb.. I whish i could use my mutiplyers but until someone makes a fix for my board thats all she well do for me:0( .... anyone out there know otherwise please let me know id love to be able to set my multiplyers id get a better over clock im sure of this thx perc.............................................. ..........

stepping for my two 1900+ MP chips are: "AGOGA 0208SPCW"

percadann · Jul 15, 2002, 06:17 AM

Mize:

hey i noticed you seem to know about the bridges on the top of the amds?? i just posted about my max over clock and stated that not having any multiplyer settings on the board im running was keeping me from getting a good over clock! Well i say all this cause i seen ur reply and was wondering if i could set the bridges on my cpu to change my mutiplyer?
can you help me with thisi got the 1900 mps in a dual set up and want to up the multiplyer settings to improve my over clock. my multipler is at 12 now. thx perc ................

toddalaska · Jul 16, 2002, 06:25 PM

hey mize just traded in the cpu for one hot 1600+ take a look in the sig

qwertrewq · Jan 26, 2003, 11:01 PM

I took my XP1900+ to 1733MHz (10.5 x 165) Palomino Core @ 1.85 V almost completely stable.

AGNGA Y on a MSI KT3 Ultra ARU with 2x 256 mb DDR PC2700 SEITEC (5-2-2-2T)

may not be much, but with this MB and oem memory sticks, it was more than i expected.

~~JAV~~ · Jan 28, 2003, 03:01 AM

Hmm,

Pally 1900+ AGNGA @ 143FSB (1712) 24/7 on a K7S5A & 2 x 256 Centon PC-133.

It'll run 147FSB (1764) w/1 stick for faster benches & such.

I've had it boot to Windows w/128mb of KingMax PC-150 @ 150mhz (1800), but it isn't really 'stable'. (735chip

)

This is @ 1.744v (bios reading) cuz the ECS doesn't allow vcore adj. & w/a GlacialTech Igloo 2410 Pro HSF & 4 case fans.

[Desktop Idle: 31c-32c, Internet use: 35c-37c, Games & benches: 41c-44c @ 143-147fsb.]

Guy I got it from said he got it to ~1839 on a KT333 mobo w/DDR333 & a Promethia.

Have a good one,

Jun 25, 2002, 12:15 AM	#1
Candyman [DH] Lover! Join Date: May 2002 Location: Toronto, Canada Posts: 284 Rep Power: 0	XP 1900+ Users??? How high can you O/C? Please post your overclocking works here. I just wanna know how high other 1900+ users have got their CPU to go. If possible, post motherboard and stepping code if you got it handy. I got my 1900+ at 1760MHz (11.5 x 153) AGOGA stepping on a Abit KX7-333 I just unlocked the CPU today. I am hoping to hit the 1.8GHz soon. __________________ AMD Athlon XP 1700+ @ 2.53GHz Abit NF7-S v.2 Thermalright SP-97 w/ TT Smart Fan 2 2 x 512MB GeIL PC3500 Platinum DDR 2 x 120GB WD HDD - RAID-0 2 x 80GB Barracuda V HDD - RAID-0 ATI Radeon AIW 9800PRO SB Audigy 2 HP L2335 23" LCD (DVI-D) WinXP Pro SP2

Jun 29, 2002, 03:36 PM	#3
debaucher DriverHeaven Newbie Join Date: Jun 2002 Posts: 1 Rep Power: 0	The highest stable OC I can achieve is 1730mhz (2100+ rating). This is run @ default voltage for both ram and cpu, FSB 138, and with the muli set to 12.5/13 ( I had a bad experience with my first unlocking attempt, so the only multi's I can choose are 12 and 12.5/13 ). If I drop the multi back to default (12) I can up the FSB to ~145, but it is not as stable as my current, plus I have to up the voltage on the CPU. I think besides my mess-up on the unlocking (which is impossible to fix) the motherboard is holding me back. I have a MSI KT3 Ultra-ARU, with 3 Maxtor ATA133 40G hooked up in raid 0 array. D. __________________ I once knew something.....but then I forgot.

Jul 1, 2002, 03:52 AM	#4
tazdevl DriverHeaven Addict Join Date: May 2002 Location: Bay Area, CA Posts: 310 Rep Power: 0	I've got a 1800+ @ 1.73... bought it when the CPUs first hit the market. It could probably go higher. Waiting on a new one (1800+)... yields have been good so I'm betting with the SLK-800 I have coming, I'll be able to hit over 1.8MHZ. 2.0 would be nice, but don't think it would happen unless i had a TEC. __________________ RIG: P4 2.6C, Thermalright SP94/Panaflo 92MM M1A, IC7 Max3, Swifty MCX159, 1GB Geil PC4000 Ultra Plat, Modded Radeon 8500, Audigy 2, 2X WD Raptor RAID 0, WD 250GB SE, Plex 708A, 166SDVD, LianLi PC75, WinXP Pro SP1, Z680's.

Jul 2, 2002, 10:44 PM	#5
ToshiroOC Unbiased. Join Date: Jun 2002 Posts: 4,812 Rep Power: 0	I have an AGKGA K processor, which on very chilly nights can get up to 1764mhz with 1.87v (1.85 in bios, but 1.87 in reality) and can hold 1722mhz even on the hottest southern california days with the same voltage. The AGKGA stepping was the first palomino processor stepping that i know of, and the K's were relatively rare. Some insane overclockers pushed an AGKGA K up to 2.0ghz with anti-freeze compressor cooled to a slush and fed with hi-pressure though a waterblock at 2.2v, so the processors have potential that my Swiftech MC462A/1.87v can't touch toshirooc edit: oops, forgot motherboard. I'm using an Epox 8KHA+ Rev.2.0 with the newest bios as of 7/2/02. (KT266A) __________________ [img][/img] [color=White]Peace be with you, Joe.[/color] Driverheaven Staff Member (Supermoderator)

Jul 3, 2002, 01:07 AM	#6
Mize The quiet one Join Date: May 2002 Posts: 150 Rep Power: 0	My MP 1900+ and XP 1800+ would both hit 1758 (185x9.5) at 1.85 v. I haven't really pushed the MP 1900+, but the XP 1800+ hit 1776 (187x9.5) at 2.1 v if only for a paranoid few minutes. Interestingly the MP 1900+ seems like it runs a bit warmer (different HSF though). Mize __________________ Rage3D > Voodoo 2 / TNT > Voodoo 3 3000 > Voodoo 5 5500 > GeForce 3 Ti200 > Radeon 8500 > Radeon 9700 Pro > Radeon X1800 XT > GeForce 8800 GTS > Radeon HD 5870 > Geforce GTX 580 #1 (died) > Geforce GTX 580 #2 (died) > 2x6970 in CFX > 2xGTX 580 3GB in SLI (fingers crossed)

Jun 25, 2002, 06:45 AM	#2
Zardon DriverHeaven Founder Join Date: May 2002 Posts: 32,480 Rep Power: 179	I got my last one to 1736mhz, core volt 1.85 running stable with the most aggressive ram settings. the CPU wasnt unlocked, I just bumped the FSB up.... I think it was around the 157mhz mark. im sure an unlocked one you could get higher. nice CPU btw.

Jul 3, 2002, 03:34 AM	#7
toddalaska DriverHeaven Junior Member Join Date: May 2002 Posts: 50 Rep Power: 0	Mize my 1800+ agoga y is doing 1859.5 alos its on water so its not even hot 35 idol 38-39 full load, thats at 1.97 volts. i messed up my unlock so I have no ten multiplier or id try for more im prtetty sure shed take it. if i added some more core. anybody know which bridge would kill the ten multiplier __________________ epox 8k5a3+ 2400+ @ 2340 20311.5 512 orsair 3200 203 fsb geforce4 ti4200 13253 3d marks 2 ibm 120gxp raid 0 WINXP PRO BIG BLACK ANTEC CASE Water cooled 32 idol - 37 prime95 tc4 - custom res and shroud by webmedic thats all thas important!

Jul 3, 2002, 11:21 AM	#8
Mize The quiet one Join Date: May 2002 Posts: 150 Rep Power: 0	Hey toddalaska: 10x is 01110 on the bridges so it's one of the center three. If you've got 9.5 then that's 01101 so I'd say it's your second bridge. You always start with 3 and then add per the bridges where the furthest right is 0.5 and, going left, they are 1, 2, 4 & 8. Of course the exception to that formula is that 00000 = 11. In your case 01110 = 3 + 1 + 2 + 4 = 10 01101 = 3 + .5 + 2 + 4 = 9.5 One of the nicest things I've read about the Tbreds is that they unlock with a single bridge-short (L5). I bought the MP because I was so friggin' tired of repairing bridges that opened. Nice xp 1800+ btw! Mize __________________ Rage3D > Voodoo 2 / TNT > Voodoo 3 3000 > Voodoo 5 5500 > GeForce 3 Ti200 > Radeon 8500 > Radeon 9700 Pro > Radeon X1800 XT > GeForce 8800 GTS > Radeon HD 5870 > Geforce GTX 580 #1 (died) > Geforce GTX 580 #2 (died) > 2x6970 in CFX > 2xGTX 580 3GB in SLI (fingers crossed)

Jul 13, 2002, 09:38 AM	#9
kpxplaya415 DriverHeaven Junior Member Join Date: Jul 2002 Location: California Posts: 42 Rep Power: 0	n/m

Jul 15, 2002, 06:06 AM	#10
percadann DriverHeaven Newbie Join Date: Jul 2002 Location: USA FL Posts: 2 Rep Power: 0	My highest over clock? Well my set up doesnt give me much room for over clocking! I run two 1900 mps on a asus a7m266d with samsung ecc registerd ram and i can only increase my fsb i dont have any mutiplyer setting to play with :0( So with that said here are my max over clock settings ok 145/290@1739 is the max and 142/284@1703.89 is the setting i run at stable all day long..... All stock settings except for the fsb.. I whish i could use my mutiplyers but until someone makes a fix for my board thats all she well do for me:0( .... anyone out there know otherwise please let me know id love to be able to set my multiplyers id get a better over clock im sure of this thx perc.............................................. .......... stepping for my two 1900+ MP chips are: "AGOGA 0208SPCW"

Jul 15, 2002, 06:17 AM	#11
percadann DriverHeaven Newbie Join Date: Jul 2002 Location: USA FL Posts: 2 Rep Power: 0	Mize? Mize: hey i noticed you seem to know about the bridges on the top of the amds?? i just posted about my max over clock and stated that not having any multiplyer settings on the board im running was keeping me from getting a good over clock! Well i say all this cause i seen ur reply and was wondering if i could set the bridges on my cpu to change my mutiplyer? can you help me with thisi got the 1900 mps in a dual set up and want to up the multiplyer settings to improve my over clock. my multipler is at 12 now. thx perc ................

Jul 16, 2002, 06:25 PM	#12
toddalaska DriverHeaven Junior Member Join Date: May 2002 Posts: 50 Rep Power: 0	hey mize just traded in the cpu for one hot 1600+ take a look in the sig __________________ epox 8k5a3+ 2400+ @ 2340 203*11.5 512 orsair 3200 203 fsb geforce4 ti4200 13253 3d marks 2 ibm 120gxp raid 0 WINXP PRO BIG BLACK ANTEC CASE Water cooled 32 idol - 37 prime95 tc4 - custom res and shroud by webmedic thats all thas important!

Jan 26, 2003, 11:01 PM	#13
qwertrewq DriverHeaven Newbie Join Date: Oct 2002 Location: Portugal Posts: 6 Rep Power: 0	I took my XP1900+ to 1733MHz (10.5 x 165) Palomino Core @ 1.85 V almost completely stable. AGNGA Y on a MSI KT3 Ultra ARU with 2x 256 mb DDR PC2700 SEITEC (5-2-2-2T) may not be much, but with this MB and oem memory sticks, it was more than i expected.

Jan 28, 2003, 03:01 AM	#14
~~JAV~~ Banned Join Date: Jul 2002 Location: California, USA Posts: 283 Rep Power: 0	Hmm, Pally 1900+ AGNGA @ 143FSB (1712) 24/7 on a K7S5A & 2 x 256 Centon PC-133. It'll run 147FSB (1764) w/1 stick for faster benches & such. I've had it boot to Windows w/128mb of KingMax PC-150 @ 150mhz (1800), but it isn't really 'stable'. (735chip ) This is @ 1.744v (bios reading) cuz the ECS doesn't allow vcore adj. & w/a GlacialTech Igloo 2410 Pro HSF & 4 case fans. [Desktop Idle: 31c-32c, Internet use: 35c-37c, Games & benches: 41c-44c @ 143-147fsb.] Guy I got it from said he got it to ~1839 on a KT333 mobo w/DDR333 & a Promethia. Have a good one,