|
|||||||
| Overclocking and Modding A haven for all you hardware Gurus who want to push it all to the MAX. |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
Sleep Deprived Ant
|
Phenom II x4 965BE Temps
So, I just read about IntelBurnTest and decided to give it a go. 5 runs at maximum stress and SpeedFan shows what the temperatures are like. My question is, are the temperatures high enough to cause concern about longevity? I need the processor to last about a year, maybe a year and a half at most. Also another thing, is there a reason CPU-Z is showing such a high voltage compared to Core Temp and what's in the BIOS (Core Temp is showing what I set it to in the BIOS)?
__________________
Couldn't come up with anything snappy to say, so I'll just be awkward. |
|
|
|
|
|
#2 |
|
What does this do?
|
Re: Phenom II x4 965BE Temps
55 degrees max during stress testing is pretty damn cold in my books - remember it'll never get that hot in regular use.
I've no experience with modern AMD processors, and notice that you have a curiously low TJ max in coretemp, but I would be amazed if that's anything to be concerned about. Don't worry about CPU-Z voltage readings too much, I'm not sure whether CPU-Z or the bios give a more accurate reading, but either way you've not gone high enough to cause damage.
__________________
Donate the spare computing power of your PC to help to cure Alzheimer's, ALS, Huntington's, Parkinson's disease and cancer: Fold for HH! |
|
|
|
|
|
#3 |
|
Moderator
|
Re: Phenom II x4 965BE Temps
55C is icy cold and very, very safe. My 980X loads at 60C usually unless in high stress situations (max burntest/max FFT p95), where it gets to about 70C. Both are safe, at least for i7 (i7's maximum before throttling/damage is 101C. I think AMD is slightly lower, but 55C is still basically icy).
__________________
Donate the spare computing power of your PC to help to cure alzheimers, ALS, huntington's, parkinson's disease and cancer: Fold for HH! |
|
|
|
|
|
#4 |
|
HardwareHeaven Senior Member
|
Re: Phenom II x4 965BE Temps
Temp is fine, on par with other PH II's.
|
|
|
|
![]() |
| Thread Tools | |
|
|