|
|||||||
| Overclocking and Modding A haven for all you hardware Gurus who want to push it all to the MAX. |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Junior Member
Join Date: Jul 2003
Location: Chile, the south of world!
Posts: 35
Rep Power: 0 ![]() |
I have installed omega lastest drivers (non hacked) over the official 3.6.
I tried to overclock in little steps but my sys crashes without artifacs or anything, it crashes suddenly forcing xp to disable the video card. For example in battlefield i can play normaly with the overclocked settings but it takes just a few seconds after i exit the game for the system to hang up ...weird. Dont know if i must install the hacked version because i didnt flash the bios to allow o/c. I´ll apreciate any reply, thanks. my rig: 9500 pro, a7n8x deluxe and 2500xp processor. |
|
|
|
|
|
#2 |
|
DriverHeaven Lover
Join Date: May 2003
Posts: 120
Rep Power: 0 ![]() |
Your bois is not unlocked. Thats why your system is crashing when you try to over clock. You need to run Omegas setup again and choose the hack driver. Not only will you get to overclock your card, you will also get Smoothvision 2.1
Edit: And welcome to Driverheaven
__________________
XP 1800+ @1610 (fsb 140) GA-7vtxe kt266a board 512 meg ddr2100 Built by 9500pro @324/310 SB Audigy gamer |
|
|
|
|
|
#3 |
|
Avril Fan
Join Date: Jun 2003
Location: somewhere in colombia, okok, bogotá city :p
Posts: 1,262
Rep Power: 0 ![]() |
not exactly, this happens to me too, but the crash has nothin to do with o/c cause if I dont let the crash to happen, i notice the o/c is back to stock rates, also if I dont o/c the crash will still happen, and yeah Im using the Hacked ones
__________________
Oblivion ftw |
|
|
|
|
|
#4 |
|
DriverHeaven Senior Member
Join Date: Jul 2002
Location: St. Paul
Posts: 568
Rep Power: 0 ![]() |
have to flash unlocked bios...then you can oc...without crashing.
__________________
2006 Subaru Impreza WRX |
|
|
|
|
|
|
|
|
DriverHeaven Junior Member
Join Date: Jul 2003
Location: Chile, the south of world!
Posts: 35
Rep Power: 0 ![]() |
Quote:
|
|
|
|
|
|
|
#6 |
|
DriverHeaven Senior Member
Join Date: Jul 2002
Location: St. Paul
Posts: 568
Rep Power: 0 ![]() |
^^ I'm sure, gotta unlock it first (of course) if you want to OC it
__________________
2006 Subaru Impreza WRX |
|
|
|
|
|
#7 | |
|
DriverHeaven Lover
Join Date: May 2003
Posts: 120
Rep Power: 0 ![]() |
Quote:
This is not true at all. You should think twice about what you say or the advice you give before you type. I can overclock the shit out of my card. I have never flashed the bois. The bois is locked because I checked. I decided to use the softmod (aka hacked drivers) over flashing the card. It is a Built by ATI Radeon 9500pro. Flash your card if you want. It's your card. If you want to know how to do it go here: http://rage3d.com/board/showthread.p...eadid=33681382 Know this though: 1.) You wil void your warrenty 2.) Read the above thread very carefully. There are many different bois files you can flash with and you better make sure you get the right one for your card and memory type or your screwed. I don't understand why you just don't use the damn softmod. You get the same results without the risk of damaging your card and pissing away your warrenty. Garrita: if you diddn't install the Omega hacked drivers OR you haven't flashed your bois then you should expect to have problems when you try to overclock your card. There are very few 9500pro cards that where sold with an unlocked bois and I think most of them where made by Saffire. I'm done!!!!!!!!!!!!!!!!!
__________________
XP 1800+ @1610 (fsb 140) GA-7vtxe kt266a board 512 meg ddr2100 Built by 9500pro @324/310 SB Audigy gamer |
|
|
|
|
|
|
#8 |
|
DriverHeaven Senior Member
Join Date: Jul 2002
Location: St. Paul
Posts: 568
Rep Power: 0 ![]() |
if it doesn't overclock and keeps going back, bios is locked....
__________________
2006 Subaru Impreza WRX |
|
|
|
|
|
|
|
|
DriverHeaven Junior Member
Join Date: Jul 2003
Location: Chile, the south of world!
Posts: 35
Rep Power: 0 ![]() |
Quote:
__________________
Asus a7n8x DX 2.0 (1005 bios)| 512 Kingston DDR400 pc3200 | Ati Radeon 9500 pro (340/319) | Seagate 7200.7 120gb | barton 2500+ @3000+(200fsb) 1.70V | WinXP SP1 | hacked omega 3.5 drivers |
|
|
|
|
|
|
#10 | |
|
Avril Fan
Join Date: Jun 2003
Location: somewhere in colombia, okok, bogotá city :p
Posts: 1,262
Rep Power: 0 ![]() |
Quote:
![]() as this happens to me too, and Im sure I can o/c with my card there most be somethen else ![]() anyway I did back to omega 3.5, until somethen get solved, u should try the same Garrita
__________________
Oblivion ftw |
|
|
|
|
|
|
|
|
DriverHeaven Junior Member
Join Date: Jul 2003
Location: Chile, the south of world!
Posts: 35
Rep Power: 0 ![]() |
WOW
i think that solved my problems.Now i am overclocking 310 320 very stable.. thanks a lot to everybody, specially to the Shadow Lady!
__________________
Asus a7n8x DX 2.0 (1005 bios)| 512 Kingston DDR400 pc3200 | Ati Radeon 9500 pro (340/319) | Seagate 7200.7 120gb | barton 2500+ @3000+(200fsb) 1.70V | WinXP SP1 | hacked omega 3.5 drivers |
|
|
|
|
|
#12 |
|
DriverHeaven Newbie
Join Date: Jul 2003
Posts: 2
Rep Power: 0 ![]() |
Hi Garrita, I am new to the forum, can you clarify if when you installed the 3.5 omega drivers, did you select hacked or normal? I was just about to install 3.6, (using omega for the first time), and would appreciate your info. Only bought my 9500pro yesterday.
__________________
ABIT NF7-S BARTON XP2500 CLOCKED AS XP3200 200 FSB 1GIG CRUCIAL 3200 9500 PRO |
|
|
|
|
|
#13 |
|
Avril Fan
Join Date: Jun 2003
Location: somewhere in colombia, okok, bogotá city :p
Posts: 1,262
Rep Power: 0 ![]() |
u can try omega 3.6 hacked, I hope u have no problem there ^^ , if any problems go to omega 3.5 hacked, either way will work flawessly
__________________
Oblivion ftw |
|
|
|
![]() |
| Thread Tools | |
|
|