Sharkims

http://www.vantecusa.com/p_cck_7025.html

It is a solid copper P4 cooler. Going to have some special support links to hold my card up of course. It should be quite a monster at cooling it.

__________________
System-1:
MSI K8N Neo Platinum || A64 3200+(200x11) - Zalman 7000A-AlCu || 1x1gb OCZ PC3200@400(3-3-3-7) || 9800XT || WD Raptors 2x36 RAID0
System-2:
MSI 875P Neo-FIS2R || P4 2.4c(FSB:200) - Intel Cooler || 2x256 GEIL PC3200@400(2-3-3-6) || AIW9000 || WD SE 120x2 RAID0
System-3:
DELL Inspiron 9100 || P4 3.0c(mobile) || 2x256mb PC3200(3-3-3-8) || Mobility Radeon 9700 - 128mb || WSXGA+ 15.4" || 60gb 5400RPM 8mb

Optimummind

Looks nice although a bit heavy for me at 537 grams. When you install that cooler, are you going to take off the shim?? I've heard mixed results about taking off the shim. For some people, it meant lower temps but for some, increased temps.

Let me know.

Sharkims

Not taking the shim off, no way. They fixed the shim problem in the 9800. I'm also not risking smashing the core. :P

__________________
System-1:
MSI K8N Neo Platinum || A64 3200+(200x11) - Zalman 7000A-AlCu || 1x1gb OCZ PC3200@400(3-3-3-7) || 9800XT || WD Raptors 2x36 RAID0
System-2:
MSI 875P Neo-FIS2R || P4 2.4c(FSB:200) - Intel Cooler || 2x256 GEIL PC3200@400(2-3-3-6) || AIW9000 || WD SE 120x2 RAID0
System-3:
DELL Inspiron 9100 || P4 3.0c(mobile) || 2x256mb PC3200(3-3-3-8) || Mobility Radeon 9700 - 128mb || WSXGA+ 15.4" || 60gb 5400RPM 8mb

The_Neon_Cowboy

or the voided warranty

__________________

Sharkims

Yeah! This way I could just put the stock one back on and wallah. I didn't even touch it. Especialy sinse the ATI 9800PRO stock cooler uses some thermal goop that looks like AS.

__________________
System-1:
MSI K8N Neo Platinum || A64 3200+(200x11) - Zalman 7000A-AlCu || 1x1gb OCZ PC3200@400(3-3-3-7) || 9800XT || WD Raptors 2x36 RAID0
System-2:
MSI 875P Neo-FIS2R || P4 2.4c(FSB:200) - Intel Cooler || 2x256 GEIL PC3200@400(2-3-3-6) || AIW9000 || WD SE 120x2 RAID0
System-3:
DELL Inspiron 9100 || P4 3.0c(mobile) || 2x256mb PC3200(3-3-3-8) || Mobility Radeon 9700 - 128mb || WSXGA+ 15.4" || 60gb 5400RPM 8mb

DriveEuro

wallah = voila

Secondly, you better put like a "stilt-like" thing under that heatsink to hold it up. Cuz with my 9500np and an AMD heatsink on it it bends the card a fair amount and this is a small heatsink

__________________
[color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color]
[color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 1600*1200 1280*1024

Sharkims

I ment to say, 'wallah'. I don't like 'voila'. Yeah, I may indeed do that. I was actualy holding it in comparison with a Zalman Heatpipe and it didn't seem all that much more heavy.

__________________
System-1:
MSI K8N Neo Platinum || A64 3200+(200x11) - Zalman 7000A-AlCu || 1x1gb OCZ PC3200@400(3-3-3-7) || 9800XT || WD Raptors 2x36 RAID0
System-2:
MSI 875P Neo-FIS2R || P4 2.4c(FSB:200) - Intel Cooler || 2x256 GEIL PC3200@400(2-3-3-6) || AIW9000 || WD SE 120x2 RAID0
System-3:
DELL Inspiron 9100 || P4 3.0c(mobile) || 2x256mb PC3200(3-3-3-8) || Mobility Radeon 9700 - 128mb || WSXGA+ 15.4" || 60gb 5400RPM 8mb

LeaDxPainT

Lol, that's gonna be awsome when your doen with it

BWX

I thought they fixed that problem by making a protrusion in the stock cooler? If so I'd be careful with the gap between the GPU and surface of the HSF. I took my shim off- I wouldn't recommend it to anyone either. It's a sketchy trick to pull off sometimes.


this is worth a look: http://my.execpc.com/~chris431/full.htm

A guy here at DH did it- and it worked great w/ that HSF, I can't find the thread though.

__________________

Sharkims

Maybe it was my Hercules that had the fixed shim.... I keep forgetting about that. I usualy add a good about of AS3 though.

__________________
System-1:
MSI K8N Neo Platinum || A64 3200+(200x11) - Zalman 7000A-AlCu || 1x1gb OCZ PC3200@400(3-3-3-7) || 9800XT || WD Raptors 2x36 RAID0
System-2:
MSI 875P Neo-FIS2R || P4 2.4c(FSB:200) - Intel Cooler || 2x256 GEIL PC3200@400(2-3-3-6) || AIW9000 || WD SE 120x2 RAID0
System-3:
DELL Inspiron 9100 || P4 3.0c(mobile) || 2x256mb PC3200(3-3-3-8) || Mobility Radeon 9700 - 128mb || WSXGA+ 15.4" || 60gb 5400RPM 8mb

DriveEuro

Me too. I thought that they just made the heatsink buldge out a little so it touched the core...

__________________
[color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color]
[color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 1600*1200 1280*1024

dipstick

My 9800P didn't have the shim problem, could use any flat heatsink. Check to see if it clears the shim before pulling it off and voiding you warranty Also good luck with this you nut; that thing is huge!! Let us know how it goes.