(Almost) Final upgrade list please check over/give suggestions

@/2ct!< · Jul 18, 2004, 05:25 AM

that is pretty good wc setup as well, im not sure DD maze 4 fits a 6800 though, nor does any gpu block atm I believe, sadly. (6800 block looks sweet though) Regarding the pumps, I would either get the hydor or the swifty. ( you can also get an aquaextreme, which is a different branding of the mcp 600). The Hydor is AC, and is a little less powerful than the swifty and it also puts out a little more heat. The swifty is a great performing pump and plugs into a molex, but cost more. I have a dual heatercore on the way as well. (OMFG, its like im in the ^#$@^ twilight zone) I will, however, get a mcw6002 cpu block, but it is close ot the TDX so it shouldnt make that much of a differecne.

@/2ct!< · Jul 18, 2004, 05:28 AM

Zardon, would you recommend YS tech 120 mm fans? I will need 2 120x38 high pressure fans for the heatercore, and wonder what the best noise/perfomance would be between the YS techs, Panaflo m1as and some Pabst ones. (I never heard of ys techs b4, but htey look pretty sweet.)

CrapolaJola · Jul 18, 2004, 06:04 AM

Well either the maze4 or the mcw gpu block said it had possible compatibility with the 6800 series, but the DD 6800 block is out later this month anyway.

I guess I might check out the MCP600 then as having a molex connector is nice as I'd like to keep this clean and not have wires going out of my case to a wall outlet.

As for fans I have a link saved somewhere of soem very nice 120mm albeit a bit more loud then other silent ones, but they pushed shitloads of air. I'll come back with linkage lata. Any more input on the WC setup. Also, how much does de-ionized water cost?

CrapolaJola · Jul 19, 2004, 03:25 AM

I hate bumping threads gah, but I must. Can someone please look over the WC and suggest brands for tubing, clamps, barbs, etc. all the little things.

@/2ct!< · Jul 19, 2004, 05:14 AM

tubing use clearflex 60, a very good and cheap brand, you can order real cheap at mcmaster carr page 85 chemical.

Jul 18, 2004, 05:25 AM	#31
@/2ct!< HardwareHeaven Senior Member Join Date: Aug 2003 Location: Not Vegas, anymore :( Posts: 1,391 Rep Power: 0	that is pretty good wc setup as well, im not sure DD maze 4 fits a 6800 though, nor does any gpu block atm I believe, sadly. (6800 block looks sweet though) Regarding the pumps, I would either get the hydor or the swifty. ( you can also get an aquaextreme, which is a different branding of the mcp 600). The Hydor is AC, and is a little less powerful than the swifty and it also puts out a little more heat. The swifty is a great performing pump and plugs into a molex, but cost more. I have a dual heatercore on the way as well. (OMFG, its like im in the ^#$@^ twilight zone) I will, however, get a mcw6002 cpu block, but it is close ot the TDX so it shouldnt make that much of a differecne. __________________

Jul 18, 2004, 05:28 AM	#32
@/2ct!< HardwareHeaven Senior Member Join Date: Aug 2003 Location: Not Vegas, anymore :( Posts: 1,391 Rep Power: 0	Zardon, would you recommend YS tech 120 mm fans? I will need 2 120x38 high pressure fans for the heatercore, and wonder what the best noise/perfomance would be between the YS techs, Panaflo m1as and some Pabst ones. (I never heard of ys techs b4, but htey look pretty sweet.) __________________

Jul 18, 2004, 06:04 AM	Thread Starter #33
CrapolaJola The Great DaK Join Date: Jan 2004 Posts: 317 Rep Power: 0	Well either the maze4 or the mcw gpu block said it had possible compatibility with the 6800 series, but the DD 6800 block is out later this month anyway. I guess I might check out the MCP600 then as having a molex connector is nice as I'd like to keep this clean and not have wires going out of my case to a wall outlet. As for fans I have a link saved somewhere of soem very nice 120mm albeit a bit more loud then other silent ones, but they pushed shitloads of air. I'll come back with linkage lata. Any more input on the WC setup. Also, how much does de-ionized water cost? __________________ P2 X4 @ 3.6ghz, 4gb ddr3, SSD, 5870 @ 950/1250 + a 3ghz i5 lappy

Jul 19, 2004, 03:25 AM	Thread Starter #34
CrapolaJola The Great DaK Join Date: Jan 2004 Posts: 317 Rep Power: 0	I hate bumping threads gah, but I must. Can someone please look over the WC and suggest brands for tubing, clamps, barbs, etc. all the little things. __________________ P2 X4 @ 3.6ghz, 4gb ddr3, SSD, 5870 @ 950/1250 + a 3ghz i5 lappy

Jul 19, 2004, 05:14 AM	#35
@/2ct!< HardwareHeaven Senior Member Join Date: Aug 2003 Location: Not Vegas, anymore :( Posts: 1,391 Rep Power: 0	tubing use clearflex 60, a very good and cheap brand, you can order real cheap at mcmaster carr page 85 chemical. __________________