Radeon 9000 o/c limits?

Junk · Feb 4, 2003, 07:23 PM

Quote:

Originally posted by pezton
weird. my memory clock is at 182, and the engine clock is at 249. i think that its the standard values. or am i wrong?

Seems low..the 9000s are usually 200/250..

pezton · Feb 4, 2003, 07:26 PM

okay.. weird that thats the standard values. , i'll raise the mem to 200.. if its possible?

arkan351 · Feb 5, 2003, 12:03 AM

yeah those numbers do sound off. bc its a non pro i have no idea if u can flash a bios that overclocks it or not(non pro 9000 lock the clock in the bios so no overclocking unless someone found a workaround and i havent heard about it yet) but if ur card is indeed running below spec u should qualify for an rma for one running the correct speed.

vk2amv · Feb 5, 2003, 12:19 AM

There is a workaround. go here http://www.titan.spaceports.com/~fax/radeon9000.htm and download hoger and PowerStrip. Even though it says other rograms I could only get hoger combined with powerstrp to work. But anyway I did SUCESSFULLY overclock my Radeon 9000 NON-Pro. And it does work. I saw real increases in 3dmark. I ran the test several times before I overclocked and always got the exact same result. Then tried overclocking without hoger no change. Then ith hoger and it worked. Let us know how yours works with this fantastic proggy. AREA_51

mrdarkside2k3 · Feb 7, 2003, 02:53 AM

I have a Tyan Tachyon G9000 Pro. I picked it up for $80. I have it currently clocked at 317/317. The card is stock. but I don't seem to get good 3DMarks

arkan351 · Feb 7, 2003, 11:55 PM

have u tried seeing if your 3dmarks increase if u clock the gpu on the card lower? in the process of using mine ive found that if the gpu starts getting hot it gets much worse scores. example is mines at 300 gpu/320 mem if i push the gpu to 305 my framerates in the game 1 low detail test gets cut drastically along with my overall score. im figuring its either a lack of cooling or a lack of gpu voltage thats causing the gpu to start making errors and causing the problems.

mrdarkside2k3 · Feb 8, 2003, 02:22 AM

I will try lowering it to 300 and see what it does. I tried OC'n my computer and I don't think my mobo supports multiplier adjustments. Well I will go test it out. Thanks

arkan351 · Feb 8, 2003, 06:20 AM

i wouldnt worry about multiplier adjustments with a duron 900. you would get the biggest benifit from upping the fsb and gaining memory bandwidth along with cpu speed and the duron will most likely max out before your memory does. bc of the durons small l2cache , a higher fsb should be used where possible to help lower the latency on cache misses and main memory access.

mrdarkside2k3 · Feb 8, 2003, 09:06 AM

the only FSB my board offers other than 100 is 133.....and I tried it.....the duron fails to load the bios.....

pezton · Mar 4, 2003, 08:53 AM

Quote:

Originally posted by arkan351
yeah those numbers do sound off. bc its a non pro i have no idea if u can flash a bios that overclocks it or not(non pro 9000 lock the clock in the bios so no overclocking unless someone found a workaround and i havent heard about it yet) but if ur card is indeed running below spec u should qualify for an rma for one running the correct speed.

Yup.. i think its weird. Its like my card is beneith the default good values or something.
And at the same time im worried to crash the card if I try to overclock it.
I dont know if I want to risk it. There is nothing more than a heatsink. No Fan or something like that.

Or should I give it a try?

nikec · May 1, 2003, 09:11 AM

well hoger works but not on winxp. my pc crashes everytime

Feb 4, 2003, 07:26 PM	#32
pezton Ancient marker Join Date: Jun 2002 Location: Skellefteå, Sweden Posts: 97 Rep Power: 0	ah.. okay.. weird that thats the standard values. , i'll raise the mem to 200.. if its possible? __________________ Sempron 3400+ @ 10 x 225 , Kingston 3200 Gigabyte GA-K8NS Nforce3 250 Sata (1,5) disk (cant remember model) @ 250 gb SweeX 650W PSU Creative XFI XtremeMusic

Feb 7, 2003, 02:53 AM	#35
mrdarkside2k3 Rah Rah Rah Join Date: Jan 2003 Location: DNAlevelC, Ohio Posts: 40 Rep Power: 0	I have a Tyan Tachyon G9000 Pro. I picked it up for $80. I have it currently clocked at 317/317. The card is stock. but I don't seem to get good 3DMarks __________________ ~Rosebud~ Chaintech 7NJL4, AMD Athlon 1800+ @2400+, Radeon 9000 Pro 64meg, (Dual Monitors and TV running), 512 Meg DDR Ram (all Generic), 6 Gig Maxtor HD, 80 Gig WD HD, SB Live! 5.1, BTC 40x12x48, WinXP Pro

Feb 8, 2003, 02:22 AM	#37
mrdarkside2k3 Rah Rah Rah Join Date: Jan 2003 Location: DNAlevelC, Ohio Posts: 40 Rep Power: 0	I will try lowering it to 300 and see what it does. I tried OC'n my computer and I don't think my mobo supports multiplier adjustments. Well I will go test it out. Thanks __________________ ~Rosebud~ Chaintech 7NJL4, AMD Athlon 1800+ @2400+, Radeon 9000 Pro 64meg, (Dual Monitors and TV running), 512 Meg DDR Ram (all Generic), 6 Gig Maxtor HD, 80 Gig WD HD, SB Live! 5.1, BTC 40x12x48, WinXP Pro

Feb 8, 2003, 09:06 AM	#39
mrdarkside2k3 Rah Rah Rah Join Date: Jan 2003 Location: DNAlevelC, Ohio Posts: 40 Rep Power: 0	the only FSB my board offers other than 100 is 133.....and I tried it.....the duron fails to load the bios..... __________________ ~Rosebud~ Chaintech 7NJL4, AMD Athlon 1800+ @2400+, Radeon 9000 Pro 64meg, (Dual Monitors and TV running), 512 Meg DDR Ram (all Generic), 6 Gig Maxtor HD, 80 Gig WD HD, SB Live! 5.1, BTC 40x12x48, WinXP Pro

Feb 5, 2003, 12:03 AM	#33
arkan351 DriverHeaven Newbie Join Date: Nov 2002 Posts: 9 Rep Power: 0	yeah those numbers do sound off. bc its a non pro i have no idea if u can flash a bios that overclocks it or not(non pro 9000 lock the clock in the bios so no overclocking unless someone found a workaround and i havent heard about it yet) but if ur card is indeed running below spec u should qualify for an rma for one running the correct speed.

Feb 5, 2003, 12:19 AM	#34
vk2amv DriverHeaven Junior Member Join Date: Jul 2002 Posts: 73 Rep Power: 0	There is a workaround. go here http://www.titan.spaceports.com/~fax/radeon9000.htm and download hoger and PowerStrip. Even though it says other rograms I could only get hoger combined with powerstrp to work. But anyway I did SUCESSFULLY overclock my Radeon 9000 NON-Pro. And it does work. I saw real increases in 3dmark. I ran the test several times before I overclocked and always got the exact same result. Then tried overclocking without hoger no change. Then ith hoger and it worked. Let us know how yours works with this fantastic proggy. AREA_51

Feb 7, 2003, 11:55 PM	#36
arkan351 DriverHeaven Newbie Join Date: Nov 2002 Posts: 9 Rep Power: 0	have u tried seeing if your 3dmarks increase if u clock the gpu on the card lower? in the process of using mine ive found that if the gpu starts getting hot it gets much worse scores. example is mines at 300 gpu/320 mem if i push the gpu to 305 my framerates in the game 1 low detail test gets cut drastically along with my overall score. im figuring its either a lack of cooling or a lack of gpu voltage thats causing the gpu to start making errors and causing the problems.

Feb 8, 2003, 06:20 AM	#38
arkan351 DriverHeaven Newbie Join Date: Nov 2002 Posts: 9 Rep Power: 0	i wouldnt worry about multiplier adjustments with a duron 900. you would get the biggest benifit from upping the fsb and gaining memory bandwidth along with cpu speed and the duron will most likely max out before your memory does. bc of the durons small l2cache , a higher fsb should be used where possible to help lower the latency on cache misses and main memory access.

May 1, 2003, 09:11 AM	#41
nikec DriverHeaven Newbie Join Date: Jan 2003 Posts: 11 Rep Power: 0	well hoger works but not on winxp. my pc crashes everytime