max voltage for hynix 3.3

toddalaska · May 18, 2002, 03:32 PM

Hey guys any body have a clue what the max voltage for the hynix3.3 would be.

i got an 8500lele (230/230) with the 3.3 running 300/310 after a bios flash and voltmod.

just trying to squeeze a little more outta the mem with voltage just not sure how high i can go

Yeti · May 18, 2002, 03:42 PM

On the subject of the 3.3 specifically...

1000/3.3 = 333Mhz. Your card should be able to run at 330 with no mods at all. I've been turning this over in my head, but have you tried lowering the voltage and seeing how fast it will go? Cuz i'm thinking the higher voltage maybe creating too much heat.

Just a thought... thx.

Jeff · May 18, 2002, 03:56 PM

1000/3.3 = 303mhz.

toddalaska · May 18, 2002, 03:56 PM

yeti, i thought about that too, but its definitely in need of voltage.

to get 310 i had to up the voltage, it was puking at 300 on default V's. so im pretty sure Ive narrowed it down to that.

Yeti · May 18, 2002, 04:08 PM

Yeah 3.3 = 303 , my bad. Well, it was just a thought. Good luck oc'ing.

DallasStar · May 22, 2002, 04:43 AM

Check the default voltage with a voltmeter/multimeter and then add "0.1".

That's usually stable in any case.

May 18, 2002, 03:32 PM	#1
toddalaska DriverHeaven Junior Member Join Date: May 2002 Posts: 50 Rep Power: 0	max voltage for hynix 3.3 Hey guys any body have a clue what the max voltage for the hynix3.3 would be. i got an 8500lele (230/230) with the 3.3 running 300/310 after a bios flash and voltmod. just trying to squeeze a little more outta the mem with voltage just not sure how high i can go __________________ epox 8k5a3+ 2400+ @ 2340 203*11.5 512 orsair 3200 203 fsb geforce4 ti4200 13253 3d marks 2 ibm 120gxp raid 0 WINXP PRO BIG BLACK ANTEC CASE Water cooled 32 idol - 37 prime95 tc4 - custom res and shroud by webmedic thats all thas important!

May 18, 2002, 03:42 PM	#2
Yeti DriverHeaven Senior Member Join Date: May 2002 Posts: 662 Rep Power: 0	On the subject of the 3.3 specifically... 1000/3.3 = 333Mhz. Your card should be able to run at 330 with no mods at all. I've been turning this over in my head, but have you tried lowering the voltage and seeing how fast it will go? Cuz i'm thinking the higher voltage maybe creating too much heat. Just a thought... thx. __________________ --Oh lord not again

May 18, 2002, 03:56 PM	#3
Jeff Yarr... I be blind! Join Date: May 2002 Location: Calgary, Canada Posts: 3,191 Rep Power: 80	1000/3.3 = 303mhz. __________________

May 18, 2002, 03:56 PM	Thread Starter #4
toddalaska DriverHeaven Junior Member Join Date: May 2002 Posts: 50 Rep Power: 0	yeti, i thought about that too, but its definitely in need of voltage. to get 310 i had to up the voltage, it was puking at 300 on default V's. so im pretty sure Ive narrowed it down to that. __________________ epox 8k5a3+ 2400+ @ 2340 203*11.5 512 orsair 3200 203 fsb geforce4 ti4200 13253 3d marks 2 ibm 120gxp raid 0 WINXP PRO BIG BLACK ANTEC CASE Water cooled 32 idol - 37 prime95 tc4 - custom res and shroud by webmedic thats all thas important!

May 18, 2002, 04:08 PM	#5
Yeti DriverHeaven Senior Member Join Date: May 2002 Posts: 662 Rep Power: 0	Yeah 3.3 = 303 , my bad. Well, it was just a thought. Good luck oc'ing. __________________ --Oh lord not again

May 22, 2002, 04:43 AM	#6
DallasStar Junior Join Date: May 2002 Location: Wave Existence Posts: 2,065 Rep Power: 0	Check the default voltage with a voltmeter/multimeter and then add "0.1". That's usually stable in any case. __________________ "A picture of my existence... would show a useless wooden stake covered in snow... stuck loosely at a slant in the ground in a ploughed field on the edge of a vast open plain on a dark winter night." --- Franz Kafka